Drag hosing with the SCHOUTEN Spider SP12260 with a Fendt 724 Vario by Breure de Waard from Swifterbant.
The SP12260 drag hose injector actually consists of 2 machines; A universal tool carrier with a Spider SP12260 grassland injector mounted in it.
The Tool Carrier HS5100 is a universal lifting unit, equipped with all functions and electronics required for a drag hose injector. Operating hydraulics, flow meter, section control and all other components are built on this tool carrier so that different types of injectors can be used. The implement carrier is also equipped with a quick coupling so that the injector can be added or dismantled within 10 minutes. This makes the tool carrier versatile. In addition to the grassland injector, a cultivator, strip-till injector or other implements can also be connected. The implement carrier is equipped with a 180° swiveling tow tube construction, the pivot point of which is located under the machine close to the swingarm of the tractor. The pulling point of the towing hose always remains low to the ground. This prevents the risk of tipping over in hilly areas. The double cardan joint allows the tow tube to pivot freely in all directions. The telescope, which automatically extends and retracts, ensures that the tension of the hose is reduced at the right moment so that every bend can be taken without problems and without lateral forces. The combination can even drive back to the beginning of the headland to fertilize it separately. This allows each plot to be fertilized squarely without overlap or double fertilization.
The advantages:
*Pull point close to the tractor so that no lateral forces are applied to the machine.
* No tipping hazard in hilly area.
* The slurry tube construction does not pull on the injector
* Fully automatic control telescope extending and retracting
* Separate headland fertilization possible.
* Multi-use for different implements.
The Spider Profi-line injectors have been specially developed with the following goals: low weight, high durability and low maintenance costs. We have achieved this excellently by using high-quality materials and smart constructive solutions. Due to its specially profiled frame construction, the machine is lightweight, yet very stable and able to withstand a high load. The 12 meter wide injector can also handle sloping plots; in the 5-piece frame, the outer arms can be adjusted to suit the ground. The machine has 12 lockable sections as standard and an automatic greasing system.
Want to know more about this machine?
www.schouten.ws/
Негізгі бет Автокөліктер мен көлік құралдары SCHOUTEN Spider SP12260 | Drag Hose Injector | Breure de Waard
Пікірлер