Good to see you have them working. I solder nearly everything wiring-wise. There are very few things where solder will not work but there are some.
@RMK67
8 жыл бұрын
Yes finally, and I'll be interested to see the reaction on your Facebook question... :)
@TouringAmericausa
8 жыл бұрын
Thanks for the detailed breakdown. That may turn into a winter project here...
@RMK67
8 жыл бұрын
Touring America yes agreed best time to do it as my bike was off the road for 7 days and glad it will help when you attempt the install 🤗
@DutchFlightTours
4 жыл бұрын
Dear RMK, ive installed mine just like yours. However only the upperpart of de leds are blinking orange and not the whole emblem like yours. What did i do wrong? Thanks! Ive got the twotone version. Btw. The whites shine all the way around?!
@RMK67
4 жыл бұрын
SoloNetherlands Goedemorgen meneer nederland, sounds like the orange LED might be faulty which can happen if the white is working all the way round, best to contact Schroedie direct and let Stefan know as he’s not to far away from Holland 🇳🇱 to Germany 🇩🇪 😁👍
@DutchFlightTours
4 жыл бұрын
RM K will do! Thanks!
@MilaccessoiresK
2 жыл бұрын
Hello Possible to do it WITHOUT CANSMART ?
@stallebrass
7 жыл бұрын
I like the amber flash and I like the white running light but I don't like the alternating white/amber when the indicator is activeas you just can't differentiate the amber from the white enough IMO. Probably get some, I'll just not wire in the white running light.
@RMK67
7 жыл бұрын
StallyMan yes agree fully but this is the only option available at this time, thanks for the positive comments 👍😎
@stallebrass
7 жыл бұрын
Be good if the running light was deactivated during turn signal operation. But I still like them a lot. Defo something I'll add to my R1200GSA LC at some point.
@RMK67
7 жыл бұрын
StallyMan it's a very good product and not too difficult to install 👍
@mgumodena
7 жыл бұрын
Great job, well done! I'm just about to buy a pair for my GTL. Does it stay white while not blinking?
@pauljoyquilter359
7 жыл бұрын
I made my own emblem lights for my K1200RS for under $20. Simply cut some rings of Perspex, glue strip LED lights to the inside surface of the ring & wire into your light circuit. There is a post about it on the I-BMW site or I can email photos or the link to any who are interested.
@RMK67
7 жыл бұрын
Paul & Joy Quilter very interesting, yes please post the link as I would like to take a look - thanks for the comments mate 🤔👍
@SixthGearMotorcycles
8 жыл бұрын
Nice work mate, they look great! 👍
@RMK67
8 жыл бұрын
Sixth Gear Motorcycles thanks mate, yes a bit of work involved, more than I had expected but the results speak for themselves - thanks for the comments and ride safe bud 👍
@ckhaustralia
3 жыл бұрын
where in Brisbane are you located, I'm in Ipswich and hopefully getting a 2012 K1600GT next month, and would love to pick your brains........
@ckhaustralia
3 жыл бұрын
Does your top box central lock?
@motorcycleHD
4 жыл бұрын
What brand, where to buy?
@RMK67
4 жыл бұрын
王泽 Schroedie, Attn: Stefan, Schroedie.de, let Stefan know that I provided you his details and I’m sure he will look after you accordingly 😁👍
@lambo2817
6 жыл бұрын
Hi! Can I ask where did you fit the blue LED wire into? Does it have to be a 12v or would it work from the din socket? Cheers
@RMK67
6 жыл бұрын
LAMBO Fun I couldn’t tell you if a din socket would work as I used the 12v socket as my power supply which kicks the power to the LED once the ignition is turned off, so my suggestion would be to use the 12v socket - best of luck with the installation 😁👍
@lambo2817
6 жыл бұрын
12v socket?????? No idea where that is, or tap into the a 12v wire? Guess I may need to chat to BM about it, I do like the emblem LEDs
@RMK67
6 жыл бұрын
LAMBO Fun depending on which type of BMW ride, the 12v is the miniature power supply on the right hand side of the K16, your bike well just have a look or ask your BM dealer 👍
@tremorflow3614
5 жыл бұрын
Just got the emblem indicators and will fit them this week, was going to ask the same question. Thanks...12v socket it will be, I use the 12v socket to charge my battery with the OEM motorrad battery charger I have, hopefully that shouldn't cause any issues with the indicators when charging in storage.
@alansoriano2434
3 жыл бұрын
how do you connect wirings on a 2020 BMW R1250GS?
@RMK67
3 жыл бұрын
You’ll need to “tap” into the indicator wiring for both the left and right hand side to work successfully
@debelastingdienst8549
4 жыл бұрын
What! Did it take seven days?!?!
@RMK67
4 жыл бұрын
Zz Top no it’s actually a couple of hours to do the install except I took my time and it was a working week which eventually turned out to be seven days from start to finish 😁👍
@debelastingdienst8549
4 жыл бұрын
@@RMK67 Thanks for your feedback! I bought this kit a few days ago and scared myself to death when i noticed 7 days. Awesome vids, please keep it up! ^Cheers!
@reggier2343
7 жыл бұрын
I started this last weekend on my k16. Hopefully ill get it completed this weekend. Can i use wiretaps?
@RMK67
7 жыл бұрын
Reggie R2 yes mate good luck with the install although it's a lengthy process you should get through it without too much hassle. Yes wiretaps are good but my advice is buy good quality ones - best of luck and let me how you go 👍
@Katojones21
4 жыл бұрын
Video was helpful but your choice of music was hideous!
@RMK67
4 жыл бұрын
Glad it was helpful but you can't please everyone when it comes to music selection...
@nikoscosmos
8 жыл бұрын
I think the posi locks types you were using are somewhat hit and miss as to whether the blade slices the insulation properly and makes electrical contact - I far prefer this type:www.webbikeworld.com/sale/posi-locks-for-sale.htm
@RMK67
8 жыл бұрын
Hey Nick, yes I've seen these before and have used with success, unfortunately I didn't think of them at the time and only had these blue crappy posi locks that yes, didn't engage the blade slice. Want to do some more work so will get some of these, thanks for the comments, very much appreciated... :)
@paulmccloskey8510
7 жыл бұрын
hi, could you post a photo of the instructions as i have lost mine, great Video ty
@RMK67
7 жыл бұрын
Best to go to the web site as I believe you can request or download the instructions as I don't have mine anymore either - cheers and thanks for the comments and ride safe - www.schroedie.de/
@sifirid
6 жыл бұрын
I appreciate the video but how did you wire the roundels to the front running lights (conversion kit?) and you also got it wired to the rear turn signals and top tank lights? Help please. I have the shrodies and the Clearwater amber conversion kit. Also am running a Rowe Electronics Pdm60. Thank you
@sifirid
5 жыл бұрын
Question. I’m getting ready to install these, how do you get out the emblems from the shrouds without mass destruction.
@geoacosta1
8 ай бұрын
I can`t understand what you are saying voice is very low volume and your accent is verystrong. next time don't speak.
Пікірлер: 45