Keep your scissor lifts in top shape by conduct daily pre-start safety inspection. Improve your safety around scissor lifts. There are at least 10 point to be inspected of your scissor lift unit before it being operated.
01. Emergency Stop Button
- Power is cut when button is pressed and it should only be hand reset
02. Emergency Decent Device
- Instruction should be attached and even without power, platform should be able to descend if controlled
03. Auto Safety Device
- When a platform is ascending, operation should be stopped
04. Crash Prevention
- Limit switch or bar for crash prevention should be installed and normally operated (more than 2, 60cm above the fence)
05. Hydraulic Device and Cylinder
- There should not be any problems like leakage, worn-out and damage on hydraulic motor, cylinder and pipe
06. Foot Switch
- Lever should only work when it is covered with foot switch being pressed
07. Lever
- Operation should not be possible when platform is slanted and it should show clear operation status
08. Warning Lights and Alarms
- Light and alarm should work when it is on operating, ascending, descending
09. Platform
- Extension pin, safety weight, boarding people and ladder should comply with safety standard and in good condition
10. Track Wheel (Tire)
- Track or wheel (tire) should not have any cracks, slope and bumps
Негізгі бет Scissor Lift (High Platfrom) Safety Inspection Checklist. Pre-start inspection.
Пікірлер