This is the most prettiest tumbler!! Great job and thanks for sharing!
@MakingwithMarilyn
3 жыл бұрын
Your video is so good!!!! Thorough and informative but not a lot of extra fluff:) I built myself a cup spinner and then never used it because I decided epoxy wasn't for me (except in small pendants, etc.). I am going to try this method with Brite Tone! Thank you so much!!!
@impossiblenotdifficult9559
2 жыл бұрын
How did you build one?! Was it cheaper than buying one for $20?? So cool?
@barbaraford8975
8 ай бұрын
Love it
@tonibates5341
Жыл бұрын
Thank you I’ve been trying to get away from epoxy, since beating thyroid cancer a few years ago. 🙏🏾🙏🏾❤️❤️❤️
@bernicestocker4100
2 жыл бұрын
This video has really help me out. I've been wanting to try the scrap paper for a while now. Ty
@mtyler1967
2 жыл бұрын
Thanks for sharing I started trying with epoxy and decided I could not use it, been doing sublimation tumblers, I really like your video very helpful will try this over the weekend thanks for sharing
@charpk5962
Жыл бұрын
Love this! I am glad you are not using exposure. Great job!
@shannon3873
2 жыл бұрын
Melissa you are the most thorough crafter that I've watched. You give great step by step details. I love watching your videos. Can you please do a video on using alcohol ink or something similar to get the swirl effect? I know you've done one for the marble effect but I just love how alcohol ink swirls with the white or black swirls looks. I am afraid to use epoxy so an alternative using BriteTone would be awesome! Thanks!
@tturner2042
2 жыл бұрын
I can not wait to try this !!! Thanks for showing it!
@Jacbean10
2 жыл бұрын
Super pretty! Thanks for sharing.
@angelabarbosa5780
2 жыл бұрын
Just saw this video!!! It was AHHHHMAZING!!! I’m definitely going to try that!
@lindyvalentine5434
2 жыл бұрын
Absolutely beautiful
@dianebaumann612
Жыл бұрын
Love this!
@glo7802
2 жыл бұрын
Beautiful tumbler!
@Mjaymkay
2 жыл бұрын
It’s beautiful thank you for the video
@MariaLopez-yn4fn
3 жыл бұрын
I'm new to trying to learn how to make these and your videos have really helped. Thanks 🥰
@MelissaCrafter
3 жыл бұрын
Im so glad I was able to help ! Im here if you need me :)
@karenbullington878
2 жыл бұрын
Thank you for sharing, I am new to Crystalac, and your videos are very helpful and appreciated.
@veefoxx
2 жыл бұрын
Beautiful
@cathegallimore
2 жыл бұрын
Does Brite Tone yellow? I know that some epoxy yellows and I was wondering if you know if the same happens with Brite Tone???
@edithrobillard3667
3 жыл бұрын
Beautiful cup.
@MelissaCrafter
3 жыл бұрын
Thank youuuu so much 😊
@campusmedical280
3 жыл бұрын
Very pretty!
@MelissaCrafter
3 жыл бұрын
Thank you 😊 ❤️
@tinishabeyondmakeup8504
2 жыл бұрын
I love this. . i have that paper roo
@jackiehoskowitz9495
Жыл бұрын
Hi Melissa. Your tumblers are beautiful. I want to start making these but I can't find the tumbler hand and the inserts to hold the tumbler. Could you please advise. Thank You. Jackie
@MelissaCrafter
Жыл бұрын
Hi thank you so much! Do you have the turner already? If so you can buy the foam inserts on Amazon… just search cup turner foam inserts
@Jamienicole-cc9ki
2 жыл бұрын
Can you use e6000 glue for the paper to the tumbler?
@quaradee9957
2 жыл бұрын
I make homemade stickers by hand I want to start making them with glitter. Would holographic paper work??
@jackiehoskowitz9495
Жыл бұрын
HI Melissa. Can you use vinyl on this particular tumbler?
@taniaordonez5364
3 жыл бұрын
First let me say, your work is beautiful. Second, on average how long does it take for you to complete something like this? From start to finish..??
@MelissaCrafter
3 жыл бұрын
Thank youuuu so much. From start to finish I would say I can finish a tumbler like this is 4-5 days . That’s if I’m on top of it and staying on schedule with the coats .
@jamiepfeiffer6005
Жыл бұрын
So hobby lobby or Michael’s have glitter glue you recommend?
@courtneyjane5270
3 жыл бұрын
I'm so happy I found your page and this video I've been wanting to use scrapbook paper on tumblers but wasn't sure how to. Are you using the thinner scrapbook paper or the thicker one?
@jamiepfeiffer6005
Жыл бұрын
Just ordered the glitter glue and britetone. This is safe to use with no gloves ? How long does a 8 oz usually last ?
@candice2968
2 жыл бұрын
Wondering if there's a better adhesive. I've watched a ton of videos and they all have eproductive harm warnings.
@carmencrespo4554
5 ай бұрын
Is it dishwasher safe😁
@jamashiafoy5088
3 жыл бұрын
Quick question I make tumblers but I sublimate them I was wondering can I still sublimate the cup and put the epoxy clear coat on it?
@savagetwin52
2 жыл бұрын
I do know that you can epoxy over a sublimated cup.
@marjoriecramer9102
3 жыл бұрын
Absolutely love your videos. My question is do you sell these? If so, because it takes days to finish are they worth the time to make? They are beautiful but don''t see how you can make any money. Do you just do it for personal gifts? Thanks
@MelissaCrafter
3 жыл бұрын
Thanks so much! 😊 you can definitely make money selling tumblers. Although these take days to make..you can make multiple tumblers at the same time (Depending on the amount of spinners you have). I’ve seen people work on over 10 cups at the same time. Which typically sell for around $45-$55 each. Sometimes maybe more. It just honestly depends on the time you have to put into it. Hope this helps 😊
@jeldisney22
2 жыл бұрын
Yes, I agree. The market is SATURATED with lots of people making these. I would find it hard to believe that they are still selling fir $45-$55. Plus how long does it take to sell? You also have to consider the holding costs. I doubt they fly off the shelf. I hope I am wrong, but doubt it.
@ForbiddenKitten
2 жыл бұрын
depending the style. there are some that sell for up to 150-175 if they are blinged out with a design as well!
@ljardell59
2 жыл бұрын
can you purchase any glitter paper for a sawgrass printer ?
@LandofEnchantmentLiving
2 жыл бұрын
Do you dry the tumbler while spinning for three hours?
@sworley1956
Жыл бұрын
could you have used a tumbler cutter to trim your rim?
@MelissaCrafter
Жыл бұрын
Yes you definitely can.
@pearlolmedo6531
2 жыл бұрын
How do you do the rim to prevent from coming off?
@savagetwin52
2 жыл бұрын
I have a cup edger from Wicked Shimmer. I was thinking that if you set it to the lowest level, it will trim off a tiny bit to expose the steel. And when u add "epoxy" it will seal. I only use epoxy, so it will be the equivalent of this non epoxy system.
@musakrtan5966
2 жыл бұрын
hello what is the hardener ratio of epoxy
@lilymarie8691
2 жыл бұрын
I’m wanting to get into doing these cups and I have a question, are you able to just use regular paper like if I I print something out can I use that also?
@MelissaCrafter
2 жыл бұрын
Yes. You could. But depending on the type of printer you’re using.. you might have to seal the image before the top coat to avoid any bleeding of the image
@cati5375
3 жыл бұрын
There is a white option for the tumblers you use. Would they work instead of having to prep and paint the stainless ones? How many coats of Brite Tone total did you do? Thank you in advance for your help. Love your videos!
@MelissaCrafter
3 жыл бұрын
Thank you! 😊 If you are talking about the pre-prepped tumblers that you can purchase on websites like thesteelmagnolia.com then yes you can use those. Those come sanded and spray painted. There’s the ones that you can find at retail stores like Walmart that come in different colors and those won’t work. Those come powder coated and won’t work well with brite tone. On this tumbler I did about 12-14 coats on it.
@cati5375
3 жыл бұрын
@@MelissaCrafter Thank you so much for your help!!
@riagray7521
2 жыл бұрын
@@MelissaCrafter 12 14 coasts of brite tone
@crystalmichellem
2 жыл бұрын
Hi, Would you also sand a acrylic/plastic tumbler down as well?
@crystalmichellem
2 жыл бұрын
After multiple applications?
@carriehache6096
2 жыл бұрын
Hi I'm confused you say epoxy free but mention in the comments using epoxy to seal the rim. Does Brite Tone hold up long when using alone? Do you seal with epoxy?
@MelissaCrafter
2 жыл бұрын
Someone else made that comment about using epoxy to seal the rim.. not me. I only use brite tone. Brite tone does hold up long.. it hardens while curing. I do not use epoxy.
@VickyC526
2 жыл бұрын
Hello so I have one of those water bottles from Walmart that are like $1.00. I had plans to spray paint it black and then add glitter to it seal with a spray gloss and then add a water Decal to it. Will brite tone work well to seal the whole cup to have that beautiful glossy finish once it is cure. Since I am pregnant and I have 1 month left, I do not want to use epoxy to sela it because I have read a lot of health issues that people have had with it. Please I am looking for an alternative to have my cup still have like this nice glossy look just like how cups do with the epoxy. Will the Brite tone be good to use for what I plan to do.
@MelissaCrafter
2 жыл бұрын
Hi ! What type of material is the water bottle?
@VickyC526
2 жыл бұрын
@@MelissaCrafter sorry for late reply it is the dollar water bottles from Walmart that are colored already.
@MrsWarcup
2 жыл бұрын
LOVE THIS!!! Have you made a glitter pen with scrapbook paper? I'd love to see that!
@MelissaCrafter
2 жыл бұрын
Thank you! I haven’t but the process will be exactly the same 😊 I’ll work on a video using scrapbook paper on a pen 🥰
@MsMadeline1974
Жыл бұрын
What are using is not epoxy can a 14 year old use it is it safe to use in the house or is it harmful
@MelissaCrafter
Жыл бұрын
It’s not epoxy. Its completely non toxic and safe to use indoors. No PPE (personal protective equipment) needed. The only time you would need PPE is when sanding.
@sworley1956
2 жыл бұрын
Did you prep this cup first with sanding and paint?
@MelissaCrafter
2 жыл бұрын
I did sand the cup and then painted only the areas that were stainless steel after adding my v split .
@athenafernandez
3 жыл бұрын
When sealing with BT, do you go all the way up and over rim?
@MelissaCrafter
3 жыл бұрын
I go all the way to the top but not over the rim.
@teresataylor5670
2 жыл бұрын
@@MelissaCrafter I am concerned that liquids will seep in if BT does not make contact with rim of cup.
@cherrygirl1977
3 жыл бұрын
Can htv be used like this prosses? Tia
@MelissaCrafter
3 жыл бұрын
I believe you can . I would have to do research on how to do that and get back to you 😊
@sharongreatbanks6049
8 ай бұрын
Great tutorial but she seems to be in such a rush! Xx
@kimberlygomez1070
3 жыл бұрын
Can we use epoxy on it?
@MelissaCrafter
3 жыл бұрын
You could if you want to . Just do your research on epoxy before using it. Epoxy requires personal protective equipment when using it since it is chemicals that will need to be mixed.
Пікірлер: 78