√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
@badandy8888
4 жыл бұрын
Cars are both a blessing and a hassle. It's always something.
@happysoul8950
3 жыл бұрын
Yes 👏🏻 my car takes me from point A to point B... But it’s always something needing to be fixed 😩
@jakimwilliams6621
3 жыл бұрын
Seriously and its so expensive
@Unknown-lp9mu
3 жыл бұрын
Wouldnt be such a hassel if mechanics weren't retards and opportunists.
@luc1503
3 жыл бұрын
AMÉN. Got my first car a few months ago and it’s been great but holy sh*t
@wasabishrimp9364
3 жыл бұрын
100% trueeeeeeee
@n8bass
3 жыл бұрын
IT WAS THE TINS!! Thank you, thank you for this video! The noise was soooo bad and embarrassing every time I made a left turn. My mechanic couldn't find the source of the noise, but you helped me find it!
@weatherman0017
4 жыл бұрын
In my autos class we would work on other teachers cars and we came across stuff like this. Man, I hope my high school let's us do autos class again this year. Loved that class
@allahjoseph
3 жыл бұрын
This mans energy is amazing
@leebannister3759
3 жыл бұрын
At first I missed the front wheel sounds and thought, oh this is not for me, then I kept watching and when he rotated the back wheel, BAMM!!!, that was the sound. So I went out and BAMM!! the front disc brake pads are much lower then the back, so I am going to order some replacements tomorrow. If the scrapping is something more, at least now I'll have new pads :) Thank you.
@Krafty
2 жыл бұрын
0:44 if you hear these noises, you're probably in a horror movie
@FSpirk
4 жыл бұрын
Omg that rotor! Yep that's the problem. Another great video. Thanks for the quality content.
@1AAuto
4 жыл бұрын
+Frank Spirk Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
@samuelmontypython8381
3 жыл бұрын
Subscribed! I’ve been trying to figure out my grinding issue at a glance and looking on forums that go over a million different niche issues but this guide is super helpful! I suspect it’s one of the issues you mentioned above OR a CV axle issue. Going to check on it this week
@1AAuto
3 жыл бұрын
+Samuel MontyPython Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@TheHistoryTellers
4 жыл бұрын
Extremely clear and AMAZING in every way!
@1AAuto
3 жыл бұрын
+MARVIN KRAZY CRAWFORD Thanks for the feedback!
@allahjoseph
3 жыл бұрын
All of 1A videos are very well done. Great school of thought 🙏🏿⚙️
@josecaceres1343
Жыл бұрын
Professionally explained very well, name everything, and educational.
@BossYOUrself23
4 жыл бұрын
That’s the exact sound my front driver side tire is making @5:55 but I just put new brakes and rotors on and didn’t notice it till after I did the new ones
@Musicizmyremedy
3 жыл бұрын
Probably brake shield
@qualityreno9689
4 жыл бұрын
i like this guy. hes a good tutor and mechanic
@1AAuto
4 жыл бұрын
+Quality Reno Thanks for checking us out! 1AAuto.com
@DashCamSerbia
4 жыл бұрын
Great video, Lenn! You are the best. That rear rotor, damn! At first I thought it was a drum, lol.
@1AAuto
4 жыл бұрын
+Ауто камере Србија / Dash cams Serbia Thanks for checking us out! 1AAuto.com
@thronewalker1153
3 жыл бұрын
I have a scraping noise when I take sharp turns. I asked around and everyone was saying it’s the wheel bearing. Everybody I asked was wrong. I recently had tie rods replaced. I found out they were installed on the opposite sides.
@butterbreath9398
2 ай бұрын
Another great video. Saving me many thousands doing the work myself and doing it better than the rushed on-the-clock mechanic downtown who cuts corners to get it done faster saying "they will never know that we stripped that bolt hole and used tinfoil to snug it back up."
@Diana-fq8bz
2 жыл бұрын
I gave this video a like cuz I love the way he animates the sounds lol. Very lively 😄
@maryatef2717
4 жыл бұрын
Thanks for all your great info. I have a 2008 GMC acadia. What a pain its been a pain!
@1AAuto
4 жыл бұрын
+Mary A'TEF Thanks for checking us out! 1AAuto.com
@NurseNekesCoconutCakes
4 жыл бұрын
You guys always come through with the best vids and parts!
@johnl3230
4 жыл бұрын
He sounds like he says "vehurcle" hehe.
@jonathant-bravo3064
3 жыл бұрын
I was going to comment on that but you are right he is saying vehurcle lmao
@stillfrosty
3 жыл бұрын
Literally laughing out loud thank you for that
3 жыл бұрын
I didn't even notice at first, I was so worried about figuring out this problem...
@rapscal2002
3 жыл бұрын
I heard "Beericles"
@sarah-marievanbrouwershave2165
2 жыл бұрын
can this also we happening when reversing or would that be something different?
@Aditya-wg3lp
10 ай бұрын
Thank you auto shop bill burr
@kevinkinal9557
4 жыл бұрын
You guys may just be BEST... (maybe even better than Eric the car guy). This was the exact problem I have. After watching your vid on the top 5 issues with Dodge grand caravans I assumed it was a warped rotor (which I think you may have overlooked in this video) due to overheating of an undersized brake, but now I have a much better idea of all the things to look for! This is about the 4th or 5th time you have, apparently, come to my house looked at my vehicle and made a vid on how to address the issue with the van. I will definitely buy my brake kits form you. Thanks!
@1AAuto
4 жыл бұрын
+Kevin Kinal Thanks for checking us out! 1AAuto.com
@swastikgrover3414
8 ай бұрын
This was very helpful thank you. Could there be some underlying issue maybe an alignment or something that caused the brake pads to wear so unevenly?
@matthewsaul3533
Жыл бұрын
Thank you for this video. I did learn a lot. I've been having a brake issue. I hear both a scratching and a chirping sound. Both rhythmic and both happening in the same rhythm, in correlation with speed. I've had the rotors and pads replaced, an axel replaced, a bearing hub replaced, found out that the bolts that are supposed to be on my rotors (2011 Honda Civic) were not installed. None of these things solved the issue. Now my mechanic wants to order factory rotors and pads "hoping" that will solve the issue. Even though the front rotors and pads were replaced less than 2 months ago. I read an article that the chirping could be related to the brake booster? But the chirping is specifically on the right front. And the chirping eventually got to the point where it was happening whenever the car was moving, regardless of whether or not I was braking. I don't understand why three different shops have all basically been guessing at this. No one can seem to pin point the cause. I wish you were in North Carolina lol
@Joeelectronicschematicsforauto
4 жыл бұрын
1A Auto how's the best videos you should be in schools like I've been saying all along for training videos for students
@1AAuto
4 жыл бұрын
+Joe electronic schematics for auto Thanks for checking us out! 1AAuto.com
@kllgrogto5838
4 жыл бұрын
Every auto mechanic/technician has a way to replicate noises, i am terrible at it.
@dudleyvasausage7879
3 жыл бұрын
wow look at those hand motions! amaziang!
@aleciagrant4114
Жыл бұрын
Ok, so my Husband replaced the front brake pads on my 2006 Pontiac Solstice and every since then when I turn the steering wheel to the right it makes a terrible loud sound. PLEASE HELP! Any suggestions?
@jeffcuevas5918
4 жыл бұрын
Also, check the quantum Polaris drive system. You may need to re calibrate it to ensure that the vortec system is operational
@shahab_shawn_siahpoosh
2 жыл бұрын
Good video, but I would never ever leave an old brake line hanging even for a second. Weight of the caliper can extend the cracks and shorten the life of the brake line even if it doesn't cause immediate failure.
@healershearttarot3056
Жыл бұрын
I went to change my tires and since then its been scraping 😢
@JamesMaguire-fd7ez
6 ай бұрын
Well explained and videography ! Thank You !
@shubhodeepgoswami1904
2 жыл бұрын
nice for making such a clear video and sharing your knowledge.
@Elmyda-vc5ew
3 жыл бұрын
Out of every video tours was most helpful. Thanx-
@boredkid1235
2 жыл бұрын
As soon as I heard that sound in the intro I knew I found the right issue
@leoh1191
Жыл бұрын
Great video but I couldn't believe a rear bad pad etc would cause a grinding noise when turning a wide left...wouldn't that noise be constant..whether turning or straight
@mahmoudalshawi2010
4 жыл бұрын
Thanks.. very helpful video...
@1AAuto
4 жыл бұрын
You are welcome Mahmoud! Glad to hear it.
@chrisryan8863
5 ай бұрын
I have an 07 honda pilot and most of my brake dust shields have rusted off. I haven't had them replaced due to the labor involved to access the area. Is it okay to not replace them and just drive without them?
@MrOrangeonion
2 жыл бұрын
Im no wiz, but i can tell this guy knows what hes talking about.
@daleparker4207
2 жыл бұрын
Simple analysis. Good video
@swaynesmith8202
3 жыл бұрын
Amazing work
@vladimirolujic6637
3 жыл бұрын
So you wouldn't suggest wire brushing the rust off on the edge?
@maamidipulusumediaentertai4952
3 жыл бұрын
After changing a rear brake I'm getting a squeaking noise while driving but particularly when I turn the vehicle. What could be the cause and how to fix it
@itzjordxnhd9850
3 жыл бұрын
Help please, seat leon 2.0 TDI car only makes a grinding sound when turning right.. no power - no noise, power - noise, more power - louder noise No noise at all when turning left
@cjstubejackofalltrade1551
Жыл бұрын
Mine the scraping sound comes and goes. Will have to check the dust shield. It doesn't make any noise when I break and I see lot of meat on the outer pad. Will have to check the inner one.
@ignaciosantillanes3241
Жыл бұрын
Great video!
@ericabertagnoli5469
2 жыл бұрын
My 14 Malibu just started making a scraping noise (or I just noticed as it’s now warm enough to roll windows down) when I turn left . I’m guessing this is the issue as I haven’t done anything with breaks in awhile.
@Dntcarebabez
4 жыл бұрын
How much would this be to fix?
@salvadorgutierrezr5914
4 жыл бұрын
Acorse I learn🙏 , nice teaching, and thanks for the video👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👋👋✌✌✌
@1AAuto
4 жыл бұрын
+Salvador Gutierrezr Thanks for checking us out! 1AAuto.com
@jujugohard4289
3 жыл бұрын
Hey A1 why is my inner front tire wearing down I’ve replaced the sway bar ball joints got an alignment .
@oldtimer6528
4 жыл бұрын
I could have sworn it was the cv axle. I was wrong, again.
@mikeblaz
3 жыл бұрын
That's more of a clunking noise. Scraping is usually brakes.
@manuelreyes1483
4 жыл бұрын
Good video. Why was not the rotten rear disc replace?? It was in really really bad condition
@1AAuto
4 жыл бұрын
+Manuel Reyes Thanks for the feedback!
@1AAuto
4 жыл бұрын
+Manuel Reyes Thanks for checking us out! 1AAuto.com
@mrredpill4072
4 жыл бұрын
That brake caliper looked horrible I will change DAT anyway lol
@KevinDalrymple-w4s
2 ай бұрын
Just replaced all of my brake parts a d I have the same grinding noise
@BrentStewart
3 жыл бұрын
My Town and Country makes this sound when turning left without pressing the brake. Can this still be brake related and why only when I turn left? Gonna take a guess at answering my own question and say the onboard computer and/or ABS is automatically applying a certain amount of brake pressure to keep the rotation balanced when turning.
@s3lfsabotag3
2 жыл бұрын
My car has brembos and one of the the rear wheels back brake pad just fell off bc the tin and pins fell off so it only had one pin and i replaced the rotor, tins, pins and brake pads and its scraping my rotor making a scratch ring around the rotor i dont know the issue now so if any advice please comment
@stevew6141
2 жыл бұрын
Great video and explanation-But now I wanna see the video of you counting your beard hairs in a mirrored brake pad😂
@nigelwalcott2488
3 жыл бұрын
I have a Nissan Maxima 05 that I saw signs the front right tire is rubbing on the control arm…what would cause that?
@george5697
2 жыл бұрын
When I make turns on my truck the back wheels make a sound as if I was traveling on a gravel road it only happens when I turn left or right do you have any idea what it might be??
@missagavia2746
4 жыл бұрын
That's why everyone that know about cars and brakes will tell you that you most change pads in pairs not just one side like whoever's the owner of that car didn't care much for it.
@m.f.6193
2 жыл бұрын
Thank you
@AshliyNykole3D
2 жыл бұрын
My brake is locking only on right turn I’ve changed everything in front brakes caliber rotor hub etc still doing it
@gameboychris15
Жыл бұрын
Definitely the back rotor and pads welp time to rob a bank and get new ones lol 😂😂😂
@gramgam359
3 жыл бұрын
Hi, How are you? i need help not related to this video? Today i rotated my car ( Toyota rav4 2017 xle hybrid) tires, Front tire goes to back and Back tire goes to Front. This is first time i did that? Before i rotated, I did not feel any grind after brake. After I rotated the tire, i feel grind when i put the brake, not noise. The brake rotors and pads are good condition. Please, help me, what could possible be grind feel. Thank You.
@rogerbenton8601
3 жыл бұрын
Thank you I learn quite A lot from your video
@bricelaten1199
Жыл бұрын
Thanks fixed my Veericle
@Paralyzer1712
3 жыл бұрын
I changed my pads and put grease on both sides but it still grinds, any tips for that?
@ureasmith3049
3 жыл бұрын
Change rotors.
@BabyGirl-dh6wb
3 жыл бұрын
Same here, brakes wasn’t the issue. So as @UreaSmith said, on to the rotors.
@robertoortiz447
4 жыл бұрын
Jesus how n why would anybody let their car to that point of been unsafe
@GetItDoneProjects
3 жыл бұрын
Thanks. I'll start on it Monday. Hehe.
@GetItDoneProjects
3 жыл бұрын
All fixed!
@boogiemanway6477
3 жыл бұрын
I went to get brake change after 2 days of driving there is scrape sound new brake pad why have a scraping sound?
@treyfulcher5413
2 жыл бұрын
Okay but i have this sound and have replaced literally all brake pads, calipers, and rotors on all wheels and i get and awful metallic scraping noise
@ARKOPAL001
3 жыл бұрын
My car wheel just got balanced and aligned ,now while extreme turn a slight noise is coming and I can see steering wheel is aligned on the Right.
@lotterylarry7777
3 жыл бұрын
Thanks bro i was looking for my problem i have the same nice bro
@saskyoutdoors
4 жыл бұрын
Do you guys have a video on how to replace and diagnose the earlier 2009 and up ford f150 iwe vacuum front locking hub
@1AAuto
4 жыл бұрын
+Sasky outdoors Great question! Search our video library for more on this vehicle: 1aau.to/m/video-library-c
@frank34450
3 жыл бұрын
Why was making sound when turning if it’s the rear ???? Really need to know
@caddi70
3 жыл бұрын
that rear brake looked like mine on a 2010 Expl I bought new. I had to hammer it all apart. thick scales of rust. brakes have never been changed till now.
@1AAuto
3 жыл бұрын
+SwitchDoctor Thanks for the feedback!
@curtisterry7702
3 жыл бұрын
I have a 2004 Mazda tribute.... it makes a loud grinding noise when I drive... midas says I need a new wheel bearing for the front passenger side... would that be the cause??? After watching this video.. im a little bit more skeptical of what they said... I think there is more to it... maybe you guys could tell me???
@fito6950
3 жыл бұрын
might be cv axle if it only makes it while turning
@juliocampos1399
4 жыл бұрын
You guys should make a video with motor or transmission mounts noises
@1AAuto
4 жыл бұрын
+Julio Campos We'll keep this request in mind for a future video! 1AAuto.com
@xooonepieceoox1917
3 жыл бұрын
You got my subscription
@1AAuto
3 жыл бұрын
+Glenn Vicencio Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@alirazmjou2149
4 жыл бұрын
درود بر شما متشکرم اقا امیدوارم همیشه سلامت شاد باشید
@lot5953
2 жыл бұрын
My car sounds like that when I turn. But the weird thing is that. It only makes that sound when making the first turn after a long hours of parking But after that first turn, I don't hear the sound anymore
@joeybez5464
3 жыл бұрын
appreciate it perfect in explaining
@1AAuto
3 жыл бұрын
+Joey B Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@brettlynch9427
3 жыл бұрын
Would the brakes cause my truck to wobble at higher speeds?
@heavenpurifoy7703
3 жыл бұрын
My car was sitting for some years and I finally replaced everything but now when I move it there's like a Trex sound coming from my back tire.
@1AAuto
3 жыл бұрын
+Heaven Purifoy Thanks for the feedback!
@ednorton47
4 жыл бұрын
Do cheap Chinese-made replacement rotors rust much more easily than the OEM GM rotors that came new on the vehicle in 2007? Since I got my original rotors replaced, I get this scraping noise after not driving the car for 2 weeks. It mostly goes away after driving it on the highway, except it is more pronounced when making very sharp turns, like turning into my driveway or into a parking space. Any ideas? Would replacing with coated rotors solve this?
@1AAuto
4 жыл бұрын
+Edward Norton We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@michaelscarbrough5977
2 жыл бұрын
That looks like a accident waiting to happen it's so weather it looks like if it heats up . It would explode 🤕
@ahotdj07
3 жыл бұрын
Goh, he loves to say "of course!"
@davidrobins4025
4 жыл бұрын
Thanks.
@1AAuto
4 жыл бұрын
+David Robins Thanks for checking us out! 1AAuto.com
@jimh.412
4 жыл бұрын
Good info! 👍👍
@1AAuto
4 жыл бұрын
+Jim H. Thanks for checking us out! 1AAuto.com
@gerrym1093
2 жыл бұрын
Wish I had a good mechanic that I can trust
@konstantinusstoyanov9749
4 жыл бұрын
Exellent tech
@1AAuto
4 жыл бұрын
+konstantinus Stoyanov Thanks for checking us out! 1AAuto.com
@kevinnelson7070
4 жыл бұрын
I would change the back rotors period. They look awful
@1AAuto
4 жыл бұрын
+Kevin Nelson Thanks for the feedback!
@riz8450
5 ай бұрын
...you forgot to check the sliding pins
@Volusiaev
3 жыл бұрын
What ever happened to Mike Green?
@rawws2232
4 жыл бұрын
Would camber mess up your brakes
@1AAuto
4 жыл бұрын
+Rawws 223 Thanks for checking us out! This type of modification would not be within the specifications the brakes would be intended for. Would the results be instantly catastrophic? No, however the longevity and braking power will be effected negatively.
Пікірлер: 164