Your video was eye opening..I'm a beginner so these videos make a huge difference for me...I appreciate what you do.
@poormansstack
Жыл бұрын
Where I am at here in Alabama people don't trash as much stuff so I can't find as much scrap as most. To me the time is not a factor, I try to squeeze every penny out of every piece I find. I would take the time to cut them off and separate 1 from 2 it does add a little more. And use a hand wire cutter, no need to waste cutting blades on copper tubing.
@kchernandez3467
2 жыл бұрын
Thank you for this very informative video, I am definitely going to show my husband, it will hopefully stop the trips to urgent care for stitches, LOL
@paulmorris8673
10 ай бұрын
Thank you very much, this is the exact question I was looking to answer. I really appreciate how carefully you performed your test to thoughly answer this question for us. Nice work!
@TinManScrapper
10 ай бұрын
Thank you. Glad you found the video helpful. Say well and happy scrapping
@thatcanada
2 жыл бұрын
Nice timing on the vid, I've found a bunch of air conditioners all in the past two weeks after finding none for months. Was contemplating breaking them apart for the copper, but not for approx $3 per hour! And the copper prices are nearly the same there as Vancouver, #1 today was $4.60 and #2 was $4.31. And once again, copper transformers were over .50 at .53 per pound.
@kphelps5431
2 жыл бұрын
Awesome as always. I can't wait to see the upcoming video you spoke about. It's a great teaching tool for my scouts. Thanks for the post!
@chadcrawford4195
2 жыл бұрын
In Tennessee USA scrap yards are not allowed to buy copper/aluminum radiators from you unless you are a licensed HVAC technician/business . I learned that the hard way after spending a few hours disassembling a large A/C unit. Also in Tennessee scrap yards are suppose to hold your money for at least 5 days after you sell them your copper, they mail you a check 5 days after the transaction is made.
@TinManScrapper
2 жыл бұрын
Thanks for the comment. Interesting way of doing things, but good to hear since there is definitely a lot of illegal copper cutting with ac units going on. Stay well and thanks for sharing
@donniebrown2896
2 жыл бұрын
You need to come south, have never had a problem here in Alabama. Just need a current DL but unless you have proof of ownership they won't touch a catalytic converter. Ours pay cash for all scrap copper.
@TinManScrapper
2 жыл бұрын
@@donniebrown2896 Nice. Cash is a scrappers best friend. Stay well and thanks for the comment.
@zhongzaisheng
2 жыл бұрын
Convenient processing equipment is necessary to quickly digest waste products and gain profits.
@michaelnonferrousscrapper682
Жыл бұрын
Wow guess I'm lucky here in Indiana USA no probs with ac rads took in over 100lbs no probs. I even took in 140 lbs of aluminum ec wire. And 100lb of copper wire no probs. Aluminum boat u need paper work idk why kinda odd.
@wadechadwick4323
2 жыл бұрын
Thanks for the video! I tried stripping the copper out, and even came up with a quick and easy method, but the time involved, the mess, sorting, cleaning is just not cost effective.
@zhongzaisheng
2 жыл бұрын
Our factory has fully automatic processing methods, greater daily output, and more efficient recycling methods.
@1Subcooling
2 ай бұрын
Thanks for doing the homework
@TinManScrapper
2 ай бұрын
Glad you found it educational. Thanks for watching. Stay well and happy scrapping
@kdscrapping4452
2 жыл бұрын
Yup Not worth the time!! Just cut the noodles off for a clean rad!! I use sawsall for this job, i was thinking of doin mine today since my trailer is M/T , good place to do it , keeps the stuff contained in one area!!
@JohnnySwedishScrapper
2 жыл бұрын
kind of agree take to long time, but for some one its mabe be worth , but its realy messy job i have done it,
@thegrumpygerman
2 жыл бұрын
Not even that is worth it. Did it today and made 53 cents more for 5 minutes of work. Lost the weight of the ferrous brackets amd the little extra for the nooodles vrated that little.extra profit. Admittedly.it was a small radiator from a window ac
@willielittle8144
Жыл бұрын
Like this video. Very detailed and informative.
@huckstirred7112
2 жыл бұрын
dont use a grinder disk to cut the solder joints .put a bolt cutters in a vice and it takes no time and no money
@junitosanchez1070
2 жыл бұрын
Thanks for the video tin I always learn something from you 👍
@louisrichards3702
5 ай бұрын
dont you need a ac or plumbers license in Canada?? you do in America...FYI dont waste a cutting disc on soft metals tubing , take a bolt cutter and crimp it and use pliers to bend apart the tube.i get copper wire alot more than i do old ac units, so i take in a few ac lines in with the CU wire and my scrap yard takes it,, just like i had a 5 gallon bucket of junk keys from a key shop ,, ii couldn't take it in all at once ,but i put 10 junk keys in with the brass and they take it..i got a roll of burned CU wire doing a rental cleanout, i cutoff a few pieces and put it in with CU wire and they take it..
@TinManScrapper
5 ай бұрын
Perhaps in some provinces, but here in southwestern Ont., no problems bringing them in
@nachostuff
2 жыл бұрын
Good to know - always looking to maximize without killing myself in the process. Sometimes you take less and enjoy the extra time and less hassle. Happy Hunting.
@TinManScrapper
2 жыл бұрын
Thanks for the comment. Stay well and happy scrapping to you as well.
@silver_salvage_savage
5 ай бұрын
Got a couple of these. Was wondering about this. Ill take your word for it on it not being worth the time. My yard pays $1.50/lb us for alum/copp rads. $2.85/lb for #2 Might have to do some math tho
@TinManScrapper
5 ай бұрын
radiators $2.85 lb now, but if we cut off the #2 fro the sides we get $2.23lb for the radiators and $4.59 lb for the #2.
@GOOcheese-ui2gg
9 күн бұрын
i have over 2000lbs or condenser coils i was looking to buy a machine fro china that mechanically separates the cooper from coil but its cost 5k plus 3k fr shipping, i do hvac so this wouldn't be a full time business but a good idea for scrappers you can charge other scppers to separate their stuff or buy nd separate make a profit
@shaunj3833
2 ай бұрын
Use a skill saw instead of a grinder to cut the copper it cuts through like butter
@TinManScrapper
2 ай бұрын
Thanks for the tip. I will try that.
@Birdgang-92
6 ай бұрын
Is is not worth my time 😂😂 Great video
@TinManScrapper
6 ай бұрын
yeah, I don’t take them out all the way either, but wanted to show people so they could decide for themselves. Thanks for the comment. Stay well and happy scrapping
@stevenaubin3362
2 жыл бұрын
I'm looking for copper and alluminum for melting so any ideas I see for where it's hiding helps. Thanks
@thegrumpygerman
2 жыл бұрын
Its everywhere.
@JohnnySwedishScrapper
2 жыл бұрын
great video
@supermanclarkkentsr4667
2 жыл бұрын
I was just starting to try this. Thanks for the help. I wont thanks
@ronniedaniels6904
2 ай бұрын
Hay I live in arkansas.we can take any kind stuff to the yard I just tore down 2air condition units today it was not easy
@TinManScrapper
2 ай бұрын
They do have a lot of parts to them, but ac units are worth their scrappers weight. Thanks for the comment.
@wessjonesiii
Жыл бұрын
At our scrapyards you have to have to be a a/c installer or have a state scraping license 5:11
@TinManScrapper
Жыл бұрын
Yup, here luckily we don’t. That is why you find a lot dumped in the garbage because people don’t want to pay to get them removed or don’t know where to drop them off.
@theaussienurseflipper.8113
Жыл бұрын
But Tinnie, if U had 100 to do and U could do them quicker, b worth it. Cheers Graham
@tommyulman6623
2 жыл бұрын
I have an outside ac unit that I want to separate the copper and aluminum because they dont take them whole done here in florida but I cant find your video on it I know it wouldnt be worth it if they would buy the copper reefer as is but they wont I would have to throw in shred which is now 8 cents tell me how to find a certain video please thanks
@TinManScrapper
2 жыл бұрын
Have not done a large outside unit yet, although I have 2 units still to do. I would actually leave the copper inside and just cut open the large compressor and take off the copper tube not inside the radiator.
@JohnDisque
Жыл бұрын
IMPORTANT Since this video was published many states have passed new laws on HVAC components and scrap-yards will not take copper/aluminum radiators, condensers or any copper tubing suspected of being from an AC/heater unit....The seller's next idea is to remove the copper tubing like you are doing but what they don't realize is.... this tubing is marked with thousands of embedded rings where the aluminum rubbed against it and the the scrap-yards can easily tell it's from an AC radiators and they STILL will not take it.... sadly. The political justification for these laws is: they create a theft-demand and people are stealing entire units off houses and businesses. Their ignorant solution is to treat all scrappers like guilty criminals. This is a result of scrappers having no legal representation and no power. I am sorry and I suggest that you carefully research your state and scrap-yard's websites before even picking up an AC/heater unit.
@nesco713
4 ай бұрын
Can you use a plasma gun???
@TinManScrapper
4 ай бұрын
Not sure, but I bet there are lots of different ways to do it.
@RoeMantic
2 жыл бұрын
I think your not correct you should watch my video on this. I think your method of scrapping them may be the time issue! I still liked the video and I'll share it!
@TinManScrapper
2 жыл бұрын
First you need a lot to make it worth while. Secondly, the weight and price of each does not lie
@TinManScrapper
2 жыл бұрын
Roe I got to ask if you were the one who gave me a thumbs down? I get one on every video and I am trying to see if it is the person I think it is who does it out of jealousy and personal dislike?
@TinManScrapper
2 жыл бұрын
Sorry just saw bottom of message. Thanks for watching, I have enjoyed your videos btw.
@RoeMantic
2 жыл бұрын
@@TinManScrapper every 1.8 lbs 1 on is copper. I've process hundreds of pounds by hand in one day. The ones you have were tiny. Retry you little experiment with big singl coils and use a sawzall for Christ sake. I wouldn't steer you wrong I'm not that bored! I like you and I want to see you realize the facts. If it wasn't profitable why do bigger companies by machin s to do this. Maybe take a minute and go watch my way of doing these, then try again
@RoeMantic
2 жыл бұрын
@@TinManScrapper no dude and I even shared on my community tab. I'm not a keyboard warrior I'm straight up
@Kreacher1974
Жыл бұрын
Just cut the ends off and sell the rest whole
@michaelwilliams6431
2 жыл бұрын
The rads are worth more clean the work eats that less than 2 dollar profit
@xXFOYXxQ8
2 жыл бұрын
I'm pretty sure you have Egyptian roots, based on your face!
@fredaelliott7235
Жыл бұрын
What type of scale do you use?
@TinManScrapper
Жыл бұрын
Just a regular kitchen scale for small items up to 11 lbs. after that I use a bathroom scale
@Notsoboring28
2 жыл бұрын
That’s so not worth it
@sarfrajmalik8292
Жыл бұрын
How much copper 50%
@TinManScrapper
Жыл бұрын
Problem is the copper is light.
@rainer8052
2 жыл бұрын
Não entendi nada!!
@sarfrajmalik8292
Жыл бұрын
MS 10%
@Twoface0233
2 жыл бұрын
Wear gloves tin man!! I scrap a bunch of air conditioners. Can’t tell you how many times those damn aluminum fins cut me 🤣
@TinManScrapper
2 жыл бұрын
Yup, agree. Very sharp. Stay well and thanks for the comment
Пікірлер: 71