hello Project Shop FL & it's is Randy and i like yours video is cool Thanks Project Shop FL Friends Randy
@ProjectShopFl
9 ай бұрын
Thanks Randy. 👊
@kimadams6489
8 күн бұрын
I love your videos. Everything is new project ,scrap material very interesting. You take stuff apart and you’re so fast at it. You always get more and more. I wish I had your energy, don’t think I could take apart scrap it in Florida way too hot for me. Alberta gets you the max is 40° and I can’t go outside.
@ProjectShopFl
8 күн бұрын
Glad you enjoy it!
@dougwilson7530
9 ай бұрын
I've had the best luck finding them at home depot. You have to look at all the different brands to find them. Good luck.
@ProjectShopFl
9 ай бұрын
I never have any luck at Home Repo
@markrice3502
9 ай бұрын
thanks for the great video i enjoy watching all of them makes my day agin thank you
@ProjectShopFl
9 ай бұрын
Cool, Thanks for watching.
@robertlivingstone3947
9 ай бұрын
You have great videos very interesting every day is different
@ProjectShopFl
9 ай бұрын
Thank you! I appreciate you watching and all the comments you leave. 👊👍
@stonerdude4611
9 ай бұрын
Steve and Oliver sure make things easier. Good job you all.
@ProjectShopFl
9 ай бұрын
Thanks, they sure do.
@Downsouthskater
9 ай бұрын
I recommend putting a curve on the corner of your amazing table and keep on scraping helping the environment and your wallet can bet that. Happy holidays everyone
@ProjectShopFl
9 ай бұрын
Thanks for the suggestion and happy holidays to you.
@y.lelivelt2619
9 ай бұрын
Nice!. You've found the lost footage.I hope this will help to clear the shop.
@ProjectShopFl
9 ай бұрын
It's helping clean out the hard drive. lol
@bigcountryscrapper6885
9 ай бұрын
Great video my friend
@ProjectShopFl
9 ай бұрын
Thanks! 👊
@danielbohannon302
9 ай бұрын
At one time I used to get all the scrap metal from moosehaven Lodge up here in Jacksonville I did a scrapbook for them for 8 years and you talking about microscope and it was a lot of work but it paid off at the end
@ProjectShopFl
9 ай бұрын
Nice! Thanks for sharing.
@markavargosr36
9 ай бұрын
was watching a video where they were pulling out the copper with a tow hook used channel locks with the pulling and it worked good
@ProjectShopFl
9 ай бұрын
Cool, Thanks for sharing.
@ThePurpleSquirrel
9 ай бұрын
All those metal panels from the switchgear boxes would make great siding for your trailers.
@ProjectShopFl
9 ай бұрын
Thanks for the suggestion
@robbuechner3647
9 ай бұрын
Our dump is $25 minimum for the first 420lbs. Then it's like 5 cents a pound after that, so you got by pretty good...
@ProjectShopFl
9 ай бұрын
Wow!
@greekgods3399
9 ай бұрын
love it
@ProjectShopFl
9 ай бұрын
Thank you!
@scrapitjc
9 ай бұрын
Great video from the archives. Keep doing it brother..
@ProjectShopFl
9 ай бұрын
Thanks, Got a few more to clear the hard drive.
@matthewwimpey7220
9 ай бұрын
late night videos NICE lol
@ProjectShopFl
9 ай бұрын
Thanks!
@silverlicious2086
9 ай бұрын
It's cool to look back at the lost footage. Keeping data and footage organized can be a task in itself. Looks like you'll be able to start with a clean slate of content for 2024.
@ProjectShopFl
9 ай бұрын
What happened with this footage was I paid the editor to edit it and after I review it and tried to render it back to the computer it would get to 11% and stop rendering. They came and tried still could not get it to render. I just got a iMac desktop and ran it through that and it worked. lol Now I am cleaning out the hard drive.
@silverlicious2086
9 ай бұрын
Good to hear about your new desktop system. Will help the Shop back office run smoother.
@dougwilson7530
9 ай бұрын
Yeah flathead screws are like the bane of my existence lol. You know it's getting hard to find the dam bits when ever I find them I buy a bunch of them.
@ProjectShopFl
9 ай бұрын
I can't find pack of just flat heads, you have to buy 1 at a time or a hole kit of other bits. lol I'm gonna have to look online.
@marcuscostello5635
9 ай бұрын
Guatemalan Boy returns!
@ProjectShopFl
9 ай бұрын
👍👍👍
@ryanphillips1388
9 ай бұрын
In Montreal they take capacitors at the scrap yard. I’m surprised they don’t in Florida
@ProjectShopFl
9 ай бұрын
I have not found one that will.
@pauljackson5482
9 ай бұрын
We in England can recycle all our glass crushed or not for free, and we can sell our plastic waste including wire strippings, don't get much but it's better than paying. Surely someone over there will take it from you.
@richardball9724
9 ай бұрын
Who buys the wire trims
@pauljackson5482
9 ай бұрын
I use a guy in heckmondwike, who takes all the plastic and trims, it really is like pence per kilo. But better than nothing
@ProjectShopFl
9 ай бұрын
I have not found anyone to that the glass or plastic even for free.
@dwaynefowler7093
9 ай бұрын
just think if you had two of the copper king tou could run both at the same time lol
@ProjectShopFl
9 ай бұрын
Yea, but That gets crazy I use to run 2 wire strippers and a granulator at the same time. lol
@wszechmocnieuzdolniony
9 ай бұрын
👍👍👍
@ProjectShopFl
9 ай бұрын
👊👊👊
@noneyabeeswax3200
9 ай бұрын
So many videos I don’t have time to watch them and do some scrapping 😢
@pvandewyngaerde
9 ай бұрын
I watch some parts at 3x speed
@ProjectShopFl
9 ай бұрын
You can always put them on in the back round.
@davehazel1994
9 ай бұрын
ask around scrapyards about capacitors some take them as irony ally better than paying to dump them
@ProjectShopFl
9 ай бұрын
Thanks for the suggestion
@MR_MDFA
9 ай бұрын
Hey man i have a question. Why do u cut the copper wire and dont let them so long like that its way faster
@ProjectShopFl
9 ай бұрын
A few reasons, you would have to and wind all the coils then it is unmanageable on the back side 1 guy can not keep up with the machine. If I had 2 guys it works I've done it before. If the long lengths pile up on the back side it turns in to a tangled mess.
@MR_MDFA
9 ай бұрын
@@ProjectShopFl Oh, thank you very much for the answer. It's also a good tip for me because I want to buy a small machine myself
@danielcooke7911
9 ай бұрын
Glass should be classed as hardcore, brick, stone and concrete waste used in cheaper foundations to make a base layer. Well that’s what they do in U.K. with it or recycle as glass waste.
@ProjectShopFl
9 ай бұрын
I wish I could do something better with it.
@taunusrunner3767
9 ай бұрын
🙂
@ProjectShopFl
9 ай бұрын
👍
@jamesbieg1251
9 ай бұрын
Funny how titanium isnt worth much in scrap but when you go to buy it as a product say an intake or exhaust valve for race engine your gonna pay a 100$ a piece for the valves
@ProjectShopFl
9 ай бұрын
It has to do with how it's made and it's extremely har to recycle. I will be going over it in a future video.
@tristanberecz8024
9 ай бұрын
in Fl in the summer do they get there everyday thunderstorms and how much rain can a bad storm dump
@ProjectShopFl
9 ай бұрын
We have a rainy season and the more you go out west it will rain almost every day. It can flood very fast some time it rains so hard. lol
@tristanberecz8024
9 ай бұрын
@@ProjectShopFl can some storm dump a inch in mins
@tristanberecz8024
9 ай бұрын
does it rain in the summer a lot
@ProjectShopFl
9 ай бұрын
@@tristanberecz8024 Yes I've seen roads turn in to rivers in minute. lol Then the sun come out a few minutes later. lol
@ProjectShopFl
9 ай бұрын
@@tristanberecz8024 Only in the rainy season, in the summer we have a lot of hot no rain days.
@ericgately6373
9 ай бұрын
Buy a dump trailer it would save you alot of time
@ProjectShopFl
9 ай бұрын
I would but they are expensive and I'm poor.
@brian56
9 ай бұрын
Two bags of garbage per day but did they say how big of a bag lol
@ProjectShopFl
9 ай бұрын
No! lol
@david.perrip4316
9 ай бұрын
Surly u know those.crimps on nuggets are copper!!
@ProjectShopFl
9 ай бұрын
Yes! we would up putting that in the stator fire. lol
@joob-jj6uv
9 ай бұрын
Shit its 120 a ton here...80 for tree branches etc
@ProjectShopFl
9 ай бұрын
Wow!
@PDTherealone147
9 ай бұрын
How long have you been scraping for???
@ProjectShopFl
9 ай бұрын
12 years, The first 6-7 was strictly Transformers.
@tristanberecz8024
9 ай бұрын
how much copper can u get per day
@ProjectShopFl
9 ай бұрын
It all depends on the jobs my customers have. But I also don't work every day.
@Mike1957belair
9 ай бұрын
🙃
@ProjectShopFl
9 ай бұрын
👍
@christophertaylor2464
9 ай бұрын
It would be nice if there was someone that payed for glass to recycle.
@joeigneczi2524
9 ай бұрын
Well at least we have ways to recycle glass bottles at least
@ProjectShopFl
9 ай бұрын
I've been looking for years.
@christophertaylor2464
9 ай бұрын
When I was a kid in the late 70s me and my brothers would pick up coke bottles out of a drainage ditch that was by are school and then we took them to the local drug store and cash them in I think we got five or ten cents each per bottle. The drugstore had a coke machine in the back an old coke machine that has a glass door on it and glass bottles in the machine. We would return the Coke bottles and get a coke and some candy because they sold a lot of candy 1¢ 5¢ 10¢ . That is my earlyish recycling I can remember.
Пікірлер: 87