This technique can also be used to extend prefabricated shafts.
Materials used:
Aluminum rod
8 mm
Aluminum tubes
8 mm (inner diameter) - 10 mm (outer diameter)
10 mm - 12 mm
Steel rods
2 mm
3.7 mm
Styrene rod to adapt to 5 mm axle shaft
5 mm - 8 mm
Screws
2 mm
The drive shafts are installed on 2020 Bronco concept.
More building process is on the channel.
Негізгі бет Автокөліктер мен көлік құралдары Scratch Building Metal Drive Shaft of any length
Пікірлер: 91