A few things to note: For M1 users, it seems there is one additional step to install homebrew. The installer itself will guide you, just copy+paste the command. For sound delay problems, try this: 1) Open sndcpy or sndcpy.bat file in any text editor 2) At the end of the file, look for a line with "--network-caching=50". Replace 50 with 0. Others have also had success reducing the sound delay by playing around the value for "stream output muxer caching (ms)" setting in VLC. For screen delay problems, or if you absolutely need zero delay/skipped frames, try this: 1) Reduce the quality of screen for scrcpy. Use parameters like scrcpy --max-size xxxx --bit-rate xxM --render-expired-frames --no-control Replace x with a slightly lower resolution and bitrate with respect to your device default. Feel free to experiment with which works best for your setup. And yes unfortunately we have to re-enable wireless ADB access every once in a while. This is by design (for security purposes)
@davidmanalo843
3 жыл бұрын
Sir! halos full 1 second ung delay nung sndcpy ko, nagtry na ako magrestart after kong gawin lahat ng steps kaso wala e. di rin ako makahanap sa ibang videos
@earlmalaki
3 жыл бұрын
@@davidmanalo843 did you try yung network-caching=0 and changing stream output muxer caching? Wired with scrcpy din ba?
@nekocharm0303
2 жыл бұрын
hi,my sndcpy on the defaut is already network-caching=0 and it sill had about 0.5 sec of delay.how can i fix it?
@zz422
2 жыл бұрын
Will this work if the computer is on a different wifi
@Owsiris.
2 жыл бұрын
Is there a way to increase the displayed resolution? mine seems to be locked at 1920
@cheeze529
3 жыл бұрын
Finally I got a proper and complete solution for streaming from phone. Thnks :)
@AliAkbar-oh5dy
Жыл бұрын
This worked flawlessly now just have it on my bluetooth for headphones from phone instead of computer. Thanks you got a new sub.!
@Hattemhassan
2 жыл бұрын
bro these isn't a youtube video these is OP film . great work bro keep going💙
@BLACKMX
3 жыл бұрын
Finally one that if they explain, a lot of friend was served, I give you like and sub, it served me in the part where the command of minute 4:13 was missing, that detail was never said in the videos I saw
@earlmalaki
3 жыл бұрын
thanks! glad to help 🙏🏼
@Azarilh
Жыл бұрын
Thank you, this worked immediatelly ( tbf i already have experience with ABS, so i can't comment for someone that has no experience ). I use Kubuntu, btw.
@iammnaborofficial
2 жыл бұрын
this video helped me a lot at the same time save me a penny.
@cheeze529
3 жыл бұрын
Bro it worked finally after a litle bit struggle. Thnks :)
@earlmalaki
3 жыл бұрын
glad it worked bro!
@muhammadraihanalfarizy_1ia100
Жыл бұрын
hey, i was wondering when i run ./sndcpy on mac it says "Waiting on device" and then "./sndcpy: line 17: adb: command not found", how do you fix this?
@swargameditationrelaxingvi9795
2 жыл бұрын
failed to install sndcpy, need newer sdk version, what should i do man ? really need your help
@qcvixxxxxx
2 жыл бұрын
Thank you! I subscribed
@adityaroshan1688
2 жыл бұрын
Thanks bro it REALLY WORKED!!!
@cvacisne
3 жыл бұрын
Just what I needes. thanks a lot from Perú. Muchas gracias !!!!!
@earlmalaki
3 жыл бұрын
glad to help!
@ppppaz6023
Жыл бұрын
i am havinbg hard time running audio from phone to windows i have vlc on my computer, does it need to start with the word export windows command line
@johnnyrambone
3 жыл бұрын
You did it! Thanks so much for making the wireless screencopy vid. After it is setup on one desktop, what ideas would you suggest for then controlling that phone from another desktop (besides the one you set it up on)? And, what if the phone and desktop are in different locations at some point, on different wifi networks? Is there a workaround to still control the phone?
@stepup_437
2 жыл бұрын
Pretty straightforward for Mac, although you forgot to describe the process for Pc.
@DamianBill
2 жыл бұрын
Thank you man. Life got more easier 🍾
@sizarwtv
2 жыл бұрын
how to record screen and audio at the same time? is that possible? thanks for answer
@pearlpereirap3designs
2 жыл бұрын
Hi, Great video. Works great. But I can't seem to get the PC to show in landscape mode when I am filming a video. Is it possible to film video in landscape and have it on the PC in landscape?
@adritoghosh8839
3 жыл бұрын
THNXXXXXXXXXXXXXXX IT IS 1 AM IN MY COUNTRY AND I AM WATCHING IT
@baynoli1
2 жыл бұрын
Great tutorial, is there any way I can do this steps without having to connect first with usb cable? Thanks
@kingx0073
8 ай бұрын
Hey i wanted to use scrcpy wirelessly with otg only, but it is not working, any fix?? I wanted to use keyboard,mouse and my graphics tablet throught it
@hollownights6469
2 жыл бұрын
Hey I have a question.. what's the command for the cmd to enable adb over tcpip? Because when I type "adb tcpip 5555" it says that adb is not recognized as an internal or external command..
@earlmalaki
2 жыл бұрын
that usually means you have not installed adb or the adb installation failed
@jbbhg2241
3 жыл бұрын
thanks alot for the informations i have a quick quick question , my phone screen is broken and its all black and i dont have acces to it meanwhile i have no acces to the debbugin option so is theres anyway i can connect it and get my informations off the phone, please reply as soon as possible
@suprapuza4070
3 жыл бұрын
Tanks man awsome guide :)) before i forget dont use those commands "(mod+o) and (mod+shif+o)" till they fix the problem . In case u did dont panik,just turn off Developer options on ur phone.♥
@earlmalaki
3 жыл бұрын
awesome, thanks man this is noted!
@vaibhavpatil5133
3 жыл бұрын
Hello Earl, I tried to run scrcpy --serial DEVICE_IP:5555 command. But it is giving me error message "cannot connect to DEVICE_IP:5555: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. (10060)". Is there any setting, we need to enable from Settings > Developer option ?
@OnlySuperHitMoviesShorts
3 жыл бұрын
thanks a million you are doing great job everytime you reply thank you so much bro♥️♥️🤝
@earlmalaki
3 жыл бұрын
thanks bro I appreciate it!
@mmjgaming5001
Жыл бұрын
Hi, can you help me? i have error " Exception occurred while executing 'set': java.lang.SecurityException: uid 2000 does not have android.permission.MANAGE_APP_OPS_MODES." thanks
@rootcanal7188
Жыл бұрын
Thanks for the video. I connected my phone by cable to the PC with your previous video on SCRCPY. It played KZitem, but not KZitem TV. The commercials played, but not the show content. The data must be encrypted somehow. Do you have any solutions to that?
@darenfrancisco4745
2 жыл бұрын
hi can u help me.. im getting an error it says cant run the scrcpy.exe coz no appropriate permissions.. and the scrcpy.exe always keep deleting when i try to open that app.. i already paste the path to environment something.. and installed adb it actually reading it by the command.. maybe the propper installing of scrcpy?
@ujjawal6660
3 жыл бұрын
Thnx man the video is really helpful 😊
@TechValor
3 жыл бұрын
I would like the audio to only come out of my computer and not the phone so there isn't an echo. how can i make that happen?
@earlmalaki
3 жыл бұрын
I think you can achieve this by lowering the phone volume to 0. Sndcpy should still stream audio to computer at normal volume
@TechValor
3 жыл бұрын
@@earlmalaki thank you the reply. I will try that
@chalo3427
Жыл бұрын
thank you so much dude!!
@richardhambel648
Жыл бұрын
At 3:35 and 10:10 it looks like you are getting some pretty bad audio delay. I have the same issue. Were you able to fix that? It is a serious problem for any application that involves both video and audio such as gaming or movies. To me it renders them unusable.
@badakazii7635
2 жыл бұрын
why does my sndcpy exits itself after like around 20 to 25 seconds? It works perfectly without lag/delay but always exits itself after 20 - 25 seconds... any solutions?
@kurokukuroki5094
8 ай бұрын
please make a video on how to mirror macbook screen to an android phone ( in tab s7+ in my case. )
@OnlySuperHitMoviesShorts
3 жыл бұрын
i use android file transfer app and when we connect our mac through wifi by adb connect command, can we transfer files from mobile without usb cable through wifi ? and please suggest me a better android file transfer app for macbook what is the command for disconnect all adb devices by tcpip? thank you so much
@earlmalaki
3 жыл бұрын
I don't think AFT can transfer wirelessly. For wired file transfer, I recommend OpenMTP. I started using it since last month and it's better than Android File Transfer in all aspects so far. For wireless, I'm afraid I don't have any recommendations since most of what I've tried way back was subpar. To disconnect, try "adb disconnect" or "adb usb"
@mithson
3 жыл бұрын
gotta say your setup is really cool which dell monitor do you use and how you are using mac os and dell monitor with it
@earlmalaki
3 жыл бұрын
thanks man! It's the Dell P2719H (geni.us/eUwNN6) It's connected to the MacBook using HDMI
@b4ubuy709
3 жыл бұрын
Best guidance and nice video tysm
@zdavzbr
Жыл бұрын
Can you automate this process, so that it runs wireless by default?
@500gods3
3 жыл бұрын
I'm having issues when running sndcpy on my phone. Whenever I start it up, it instantly starts lagging my apps (but I can still use the dragdown menu just fine) and it makes it so that audio plays in spurts out of my phone speakers and no audio from VLC. Is there a fix I can do for this?
@npunase4107
3 жыл бұрын
When trying to connect via WiFi mine says 'no devices/emulators found'. I'm running on win10 and phone- android 7.0.
@npunase4107
3 жыл бұрын
Now it's working but as long as you're connected via USB cable. If you remove the cable you disconnect it. CMD commands are working only if I use usb cable. So it's useless.
@earlmalaki
3 жыл бұрын
@@npunase4107 you need to plug it in using usb to setup or enable the wireless (with the "adb tcpip" commands, etc.), after which you can unplug then run it wirelessly
@SquishyJello
2 жыл бұрын
This is awesome! How's the latency?
@handikurr
3 жыл бұрын
Bro, can you help me? The sound streamed sucessfully to my macbook. But my desktop audio in OBS not detect the sound. Can you give me the solution? Thanks
@samuelnosakhare3858
2 жыл бұрын
i tried and all was good but when i restarted mu macbook i had to go through the wireless process all over again. please whats the problem ?
@OTAKUDSAMA
3 жыл бұрын
thanks bro its really helpful
@earlmalaki
3 жыл бұрын
glad to help bro 💪🏼
@Jinith
2 жыл бұрын
when using sndcpy and scrcpy and when in voice chat with friends in-game audio comes from the phone speaker how to fix this, my phone only has " USB C" and no headphone jack. By the way, I'm using windows.
@AdamsLomillo
3 жыл бұрын
Hi Sir.. There are certain app that SNDCPY is not working.. while on other apps working properly.. How can i fix it sir? Thnks
@earlmalaki
3 жыл бұрын
Hey there! Unfortunately, it can only capture if the app allows it to. There's more information about it on sndcpy's site (link in description)
@literallyme.realmp4
2 жыл бұрын
IT ACTUALLY WORKS WOW Im having a problem though... the audio cuts out and I have to re-enable it every 10 seconds or so. Is it because my phone is bad or is there a way to fix that?
@ddbro2255
3 жыл бұрын
I am getting error: Please help Modified the bat file and added VLC="C:\Program Files (x86)\VideoLAN\VLC\vlc.exe" went to Environment Variables/ System Variables and gave the path to VLC Then ran the bat file sndcpy.. But its showing an error message Playing audio... The system cannot find the path specified. Please help (i am running both scrcpy and sndcpy in my pc)
@earlmalaki
3 жыл бұрын
You don't need to update Env Vars. Modifying the bat file is enough. Can you double-check if the VLC path you put is indeed correct? Also, make sure to tap "allow" on the phone when prompted. And try running the bat file as admin.
@shahumar401
3 жыл бұрын
Bro bro bro... You are the best
@earlmalaki
3 жыл бұрын
glad to help brother!
@marwadichoro
2 жыл бұрын
Thank you for the video, very helpful. Could you please make a video or suggest How I can reroute the sndcpy audio to voicemeeter ? I stream mobile game and after connecting using sndcpy and scrcpy I hear dual audio. If I can identify the audio and reroute to voicemeeter I can easily mute the additional voice.
@unbiased1004
2 жыл бұрын
Hi thanks for awesome video, please show us how to connect usb playstation controller on pc and to get recognized by android device with scrcpy, if possible please make it as my pc mouse is able to control the phone screen on the pc, then why not the gamepad controller, please help ?
@Kshot93
2 жыл бұрын
HI, thanks for the video it's working now butI would like to use my microphone from my pc on my phone is it possible ?
@OnlySuperHitMoviesShorts
3 жыл бұрын
is it possible that i can copy screen to my mac but mobile screen should be off during i am copying the mobile screen to my mac
@earlmalaki
3 жыл бұрын
yes. just run it with the "turn-screen-off" command. that is "scrcpy --turn-screen-off"
@OnlySuperHitMoviesShorts
3 жыл бұрын
thanks a million you are doing great job everytime you reply thank you so much bro♥️♥️🤝
@m1_zt360
3 жыл бұрын
Thanks for this. Very helpful :)
@earlmalaki
3 жыл бұрын
glad to help!
@bangtigorgreat
3 жыл бұрын
Hi Earl, Try using SCRCPY 1.17 with windows 10 wirellesly not working... devices succesfuly connected with wireless since it appear in adb devices command... but each time i try to run scrcpy in wireless it will closed... but with cable it run smoothly... devices android 10 oneplus 5
@duyuggaming3999
2 жыл бұрын
Hi, The vid is super helpful but i keep running into a problem. When i start the cmd prompt for windows it says that it fails to install the sndcpy.apk everytime. What's a good solution to fix this issue?
@charan2998
2 жыл бұрын
Hey man,i have IP address of the phone but wifi connected is not same...Is it possible to mirror the screen using this process..(waiting for your reply..)
@earlmalaki
2 жыл бұрын
hey, wdym wifi connected is not the same? you mean like the phone and computer isn't connected to the same network?
@dungly3855
3 жыл бұрын
Hey man! Thank for uploading the video. I was able to perform the audio through my laptop but I am still having the same problem when trying to connect wirelessly. At this point, I am assuming it may have to do with my school's internet with its IP Address that is preventing me to do it wirelessly 🤔 I will update again if the internet at my home does not work.
@earlmalaki
3 жыл бұрын
Complex networks like the ones in schools tend to make setups like this difficult to get running. I remember we had trouble with a similar setup years ago for a univ project, good times hahaha hope yours work! Let me know how it goes
@vinaydangwal924
3 жыл бұрын
How can i specify the serial of device with sndcpy, It gets stuck on waiting for device if enter "sndcpy -s ". For scrcpy its working but not with sndcpy.
@earlmalaki
3 жыл бұрын
To specify a device for sndcpy, do "sndcpy ". no need for the -s flag
@madammm2116
3 жыл бұрын
Is the Wireless connection scrcpy thru Mobile hotspot is possible or not?
@bobbkullu
2 жыл бұрын
hello sir ,,,how to put mobile top using while other application?
@Lynn-mc9zk
2 жыл бұрын
Thank you !
@ppppaz6023
Жыл бұрын
for windows vlc command line?
@rakhiaboerasakhi4627
2 жыл бұрын
Hi, your video is very helpful! I have 1 quick question, can I make or receive a call with audio & mic from mac ?
@gururajp2006
2 жыл бұрын
Hi, scrcpy and sndcpy both are working fine individually on wireless mode, however when i run srcpy and then press control c on terminal om mcbook air to proceed to sndcpy, scrcpy application is also exited, hence i can only run only 1 and not both simeltaneous. pls help
@earlmalaki
2 жыл бұрын
open a new terminal tab/window then run the second app there. control + c stops it from running.
@gururajp2006
2 жыл бұрын
@@earlmalaki Thanks a lot. Command+Options+N opens it into new window. This works really well. Only one problem. I see zsh error after each restart and has to download homebrew again and again any solution?
@earlmalaki
2 жыл бұрын
@@gururajp2006 are you on M1 mac? If yes, there's an additional 1 step after installing homebrew. The installer itself will tell you what to do so try to observe the homebrew installer output. something along the lines of "add brew to your path", and it'll tell you how to do that. Because if brew isn't in the path, brew commands won't work.
@andresmora3825
2 жыл бұрын
Hello thanks, how many devices can I connect ?
@S-ivanov
2 жыл бұрын
Hi Many thanks for your great tutorial it helped a lot. But I am running into an issue with the Sound. It will mirror it for like a minute and then stop mirroring. Do you know a solution for this? Thanks.
@ConfidentFitness
3 жыл бұрын
For wireless scrcpy.... Is there a way to save the settings so that on shutdown I can simply just run scrcpy and have it connect wirelessly without having to do all these steps again?
@Aurokris
3 жыл бұрын
It would really be helpful, i was hoping if there'd be a way as well
@tamilstory9111
3 жыл бұрын
thank you for your video for supporting scrcpy and snd cpy ...but the problem i installed in my netrunner linux sndcpy....also asking allow and while recording video is not recording sound ...
@console6813
2 жыл бұрын
Hi, does it exist an app similar to scrcpy for console mirroring on PC through USB cable?
@renzbriones1699
3 жыл бұрын
Can you do a full video for windows in setting up scrcpy and sndcpy
@earlmalaki
3 жыл бұрын
I did include that information in this video and the part 1. It's almost the same, maybe even simpler in windows because adb is packaged inside the sndcpy or scrcpy folder. What specific part did you have problems with?
@Marko-gj4px
3 жыл бұрын
Wow its working, thanks you
@earlmalaki
3 жыл бұрын
great!
@marianne731
3 жыл бұрын
Hi, what's the steps for scrcpy and sndcpy using wired usb? I wanted to stream smoothly but I want to know first about running it with wired tho
@earlmalaki
3 жыл бұрын
Hello! Have you seen the other vid? I walked through how to use scrcpy wired. You can start there, then apply the same for sndcpy. Let me know if you get stuck
@marianne731
3 жыл бұрын
@@earlmalaki hi, i successfully did the first video of scrcpy wired, and I'm trying to set up the sndcpy but it says "cd: no such file or directory: Downloads/sndcpy-v1" what should I do? thanks!
@earlmalaki
3 жыл бұрын
@@marianne731 great! now at what step did that error show up? and what OS are you using?
@tuanblack_
3 жыл бұрын
@@earlmalaki Hi Earl Malaki, I have the same question as Marianne Amador. I did SCRCPY and I did SNDCPY. But how to combine the two? When I start SCRCPY, how do I go back to cd Downloads/....
@earlmalaki
3 жыл бұрын
@@tuanblack_ What will happen is that you have two terminal tabs/windows. The first one is for scrcpy, then you open a new terminal tab/window so you can execute the commands for sndcpy (cd Downloads/..., then run sndcpy)
@movieworld1718
3 жыл бұрын
Bro help me Audio permission press enter click after close program. Why is that?
@b4ubuy709
3 жыл бұрын
Can we screen copy of our macbook to our mobile Can we?
@giostudios8262
2 жыл бұрын
Omg it worksssss
@Uchihaplayss
Жыл бұрын
after connecting screen when i try to connect sound it shows the error:more than one device
@tamastraycat
3 жыл бұрын
After setting up SCRCPY and SNDCPY, it actually really works and thank you so much for this. It helps me a lot. I do, however, stumble a problem and that is the audio delay that happen at certain point when I run both SCRCPY and SNDCPY. Do you know how to fix this? Edit: I forgot to tell that I'm using Mac now.
@earlmalaki
3 жыл бұрын
can you try this out: open the sndcpy file in a text editor, then on the last line ("$VLC" -Idummy --demux rawaud --network-caching=50 --play-and-exit tcp://localhost:"$SNDCPY_PORT") see the "--network-caching=50"? change the 50 to 0. it will remove 50ms of delay. save the changes on the file, then restart sndcpy for changes to apply. the sndcpy author is recommending this fix to reduce delay
@tamastraycat
3 жыл бұрын
@@earlmalaki Sorry that I just reply now. For me, I do feel there's still an audio delay. However it's much less noticeable than the previous one to the point I don't mind about it. So, thank you for the advice.
@earlmalaki
3 жыл бұрын
@@tamastraycat no worries! glad that it helped even just a little haha i'm working on a video about a better solution using 3.5mm cable I think this is definitely better than SNDCPY
@Hag24
2 жыл бұрын
when I start sndcpy it closes a few seconds after the audio is played
@ImSchneckenhaus
3 жыл бұрын
I am actually having issues with the wireless screencopy method. I keep on receiving the error _No connection can be made because the target machine actively refused it._ Any tips on this?
@ImSchneckenhaus
3 жыл бұрын
@@earlmalaki it did work wired. I am also entering _adb devices_ upon creating the 5555 server to check if the device is connected. The device will be recognized if it is connected via USB, but will terminate the connection once I disconnect the USB 😭 i did find that disconnect/kill-server commands but i am still receiving the same error
@ImSchneckenhaus
3 жыл бұрын
@@earlmalaki I receive no errors on the tcpip command. As per the vid, once you've created the 5555 server, you can disconnect the phone and enter _adb connect phone ip:5555_ . That is where I receive the error... Regarding permissions, I run CMD as admin. I tried restarting the phone and the PC as well 😭
@Baraktiid
3 жыл бұрын
Failure [DELETE_FAILED_INTERNAL_ERROR].. how is it bro?
@duyinhhoang5472
3 жыл бұрын
I ran into two problems when I use the command with scrcpy. Can you help pls? No.1: scrcpy : The term 'scrcpy' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again. No.2: sndcpy works great with no audio lost, but the sound seems to be noticeably delayed when I use both scrcpy and sndcpy
@earlmalaki
3 жыл бұрын
#1 I think your cmd's current directory is not set to the scrcpy folder? (example, cd Downloads\scrcpy.x.x.x) On Windows, you can also just double click the scrcpy.exe or scrcpy.vbs file. #2 Try this. Open sndcpy.bat in a text editor. Towards the end, look for a line with "--network-caching=50". Change 50 to 0. Not a guaranteed fix but seems to work for most.
@duyinhhoang5472
3 жыл бұрын
@@earlmalaki Alright. #1 Before asking, I did try using scrcpy command on PowerShell for customization, double click .exe works fine. I failed customization using PowerShell, so I switch to cmd and it works. #2 I tried your advice and the .bat file seems not to be working. It stuck at "Waiting for the device"
@b4ubuy709
3 жыл бұрын
please help what i shoud do it is showing adb error more than one device or emulator
@earlmalaki
3 жыл бұрын
do you have android studio on your pc? that usually means you have multiple version/instances of adb in your system. try "adb kill-server" to restart adb, then try again
@liquidwawan7114
3 жыл бұрын
is SNDCPY dont support android 7.1.2?? :( is there another alternative??
@charlesdevhallig2182
3 жыл бұрын
Hi, thank you for this tutorial but it seems that I cannot control my phone using my Mac. Am I missing something? Thank you
@earlmalaki
3 жыл бұрын
Glad to help! What phone? With some phones one might need to enable additional permission from the phone to receive inputs from ADB (see github.com/Genymobile/scrcpy/issues/70#issuecomment-373286323)
@speeters73
3 жыл бұрын
Hi, Can you also use this to make a phone call and listen to the call?
@earlmalaki
3 жыл бұрын
Hello! Interesting, someone recently asked a similar question on calls. Well, technically, you can start a call by using the mirrored screen on your computer. But the call will still use the phone's hardware (mic and speaker).
@MrMosoani
3 жыл бұрын
After running those line of codes which I carefully followed but got lost after I saw you mirror the video on your phone to your Mac without showing us what you pressed to do that. My question is after copy pasting the line of codes what do you tap to actually mirror your phone to your Macbook? I just want to mirror my phone WIRELESSLY to my macbook pro like how I'm doing with airdroid.
@earlmalaki
3 жыл бұрын
Hey there! Can you point me to the part of the video where I lost you? So that I know what is left to run. When everything is set up, you only need to enter "scrcpy" on the terminal to start the mirror
@MrMosoani
3 жыл бұрын
@@earlmalaki 2:40. The app where we shall press start now. Because after I enter the code nothing popped up on my phone screen for me to press Start Now.
@earlmalaki
3 жыл бұрын
@@MrMosoani that's for sound mirroring (sndcpy). wireless screen mirroring (scrcpy) starts at 05:03. btw note that it's a prerequisite to run scrcpy wired first before attempting wireless. have you made it run wired before?
@JibrilRian
3 жыл бұрын
Hi! Thanks for the video! I just want to ask is the sound delay on your mac? Because it's delay on mine abous a sec.
@earlmalaki
3 жыл бұрын
hi there! try this: 1 Open the sndcpy file in a text editor (like TextEdit) 2 Near the end of the file, you'll see a line with "--network-caching=50". Replace 50 with 0. I only found out about this recently, apparently it helps reduce the delay
@JibrilRian
3 жыл бұрын
@@earlmalaki thx bro! I already found it yesterday, for me change that to 0 is not reduce the delay, but i also change the "stream output muxer caching (ms)" on the VLC n it's work like a charm. But thanks anyway for reply! For that u i'll subscribe u XD
@earlmalaki
3 жыл бұрын
@@JibrilRian that's awesome, i didn't know about that, thanks for sharing! and thanks for the sub! hahaha
@richardhambel648
Жыл бұрын
@@JibrilRian What did you change it to?
@RacPlayz
3 жыл бұрын
SNDCPY Runs Successfully But i dont hear any sound, any sol ? edit : my bad, I Use Voice Meter And Yes I Just Changed My Output Device And it started Working Thanks To You Bud
@earlmalaki
3 жыл бұрын
Happy to help!
@lightningzomboo1990
3 жыл бұрын
But make one of sound delay in sndcpy usb for windows
@misosoup8863
3 жыл бұрын
Hi may scrcpy drops frame rate when im recording. though my phone run smoothly but not on screencopy app
@earlmalaki
3 жыл бұрын
Recording or streaming using OBS? Does it only fps drop when recording is active? If yes, it might be related to system resource
@misosoup8863
3 жыл бұрын
@@earlmalaki it lags even the scrcpy is the only App im running.....it will run smoothly for few mins then itll became glitchy
@earlmalaki
3 жыл бұрын
@@misosoup8863 what's your phone and pc? try reducing reso and bitrate it might help scrcpy --max-size xxxx --bit-rate xxM --render-expired-frames --no-control
@misosoup8863
3 жыл бұрын
@@earlmalaki my phone is Black shark 3 and Macbook Air 2017
@misosoup8863
3 жыл бұрын
@@earlmalaki how to adjust it on mac?
@Tibertiber
3 жыл бұрын
bro, seems like wired connection not working anymore after setup wirelessly. and wireless connection is not working if im using mobile internet hotspot. any idea?
@earlmalaki
3 жыл бұрын
reset adb using "adb kill-server", wired should work again next time you run "scrcpy" For the hotspot issue, I'm afraid I don't have any ideas how to resolve this. Do let me know if you have leads though!
@Tibertiber
3 жыл бұрын
@@earlmalaki thanks dude, the adb kill work perfectly, somehow using mobile internet hotspot working lol, not sure why failed at first attempt. tq2, nice explanation and love your video 👍🏻
@earlmalaki
3 жыл бұрын
@@Tibertiber gotta love those mystery fixes haha 🤣 anyway, great! Glad to help!
@KevinPerez-uu6vk
3 жыл бұрын
how can i install sndcpy apk on an android 9 version?
@earlmalaki
3 жыл бұрын
unfortunately, sndcpy only works for android 10 and above devices. (it's using an audio streaming API that's only available starting android 10)
@syedmuthiurrahman
3 жыл бұрын
Hey bro can we use both simultaneously with wired to record my gameplay
@earlmalaki
3 жыл бұрын
Yup can do both screen and sound simultaneously wired too
@syedmuthiurrahman
3 жыл бұрын
@@earlmalaki Thanks Bro
@syedmuthiurrahman
3 жыл бұрын
@@earlmalaki Hey Bro can I Connect from USB - C To USB - C
@earlmalaki
3 жыл бұрын
@@syedmuthiurrahman yup bro it shouldn't matter if type-a or type-c
@syedmuthiurrahman
3 жыл бұрын
@@earlmalaki Bro Not Working With C Cable please make a video
@BrendelMac
3 жыл бұрын
Hey dude, just wanted to ask if you were able to encounter the issue where you can't adjust the audio volume playing on your pc? I tried adjusting my phone volume but it's not reflected on my mac. Thanks for this video btw! :)
@earlmalaki
3 жыл бұрын
Hey man, I tried this now. The volume adjustment is independent -- that is, volume adjustment on the phone will only adjust the volume on the phone speakers, while volume adjustment on the computer will only adjust the volume on the computer speakers. Awesome, glad to help!
@BrendelMac
3 жыл бұрын
@@earlmalaki that makes sense 😅 I was using a different audio capture device on my mac but this worked when I switched to using the original audio output. Thanks dude!
@earlmalaki
3 жыл бұрын
@@BrendelMac I see hahaha great!
@kirus9396
3 жыл бұрын
when I wireless sndcpy and scrpy it lags on the mirror but in my phone it doesnt. It's weird cause it starts lagging when I run sndcpy, but if I just scrpy mirror the phone wirelessly it doesnt have a problem. Audio copy isn't delayed but if I run both audio and screen copy in the monitor it stutters but in my phone it doesn't. Do you know how to fix this Earl? Liked the video btw :)
@earlmalaki
3 жыл бұрын
Hey man sorry my reply's a little late haha Given you're running wireless, I'm thinking of two things: 1) Reduce quality of screen for scrcpy. Use parameters like --max-size xxxx --bit-rate xxM --render-expired-frames Replace x with a slightly lower resolution and bitrate, feel free to experiment which works best for your setup. 2) Open sndcpy in a text editor, look for --network-caching=50, change 50 to 0.
@TheArliChannel
3 жыл бұрын
why im getting this error at audio? [00007fc5608089e0] main stream error: connection error: Connection refused
@earlmalaki
3 жыл бұрын
author says that is expected for now (to be fixed). That's if as long as it's working haha
@kpichisan1917
3 жыл бұрын
is there a permanent solution to "export VLC=/Applications/VLC.app/Contents/MacOS/VLC" ? just asking so i wont have to type this over and over again
@earlmalaki
3 жыл бұрын
You can add that line (VLC=/Applications/VLC.app/Contents/MacOS/VLC) to your .zshrc or .bashrc file, save it, then restart terminal
Пікірлер: 339