That is freaking awesome. I'm sure it was alot of trial and error. That mini Revo worked great.
@CineMoto24
3 жыл бұрын
Yes, there was. I have probably 200 hours into these projects at this time.
@okrc6389
3 жыл бұрын
it's amazing! It's a very exciting mod.
@CineMoto24
3 жыл бұрын
Thank you!
@GasBrakeSim
2 жыл бұрын
Hey brother ! Any update on the tracks for the mini revo ?
@DArealCHAZZ
3 жыл бұрын
I was wanting the scx 24 tracks you made. Then you had to go and show me the E-Revo tracks just awesome. That damn thing really rips through the snow. A lot of people say my stuff rips through the snow, not like that LMAO
@CineMoto24
3 жыл бұрын
I do have to say I am a little biased towards the E-Revo. It is definitely more fun in the snow!
@justcrawling1916
3 жыл бұрын
Sweet
@sams4281
3 жыл бұрын
Nice
@lucky2000m
3 жыл бұрын
That's awesome, are you gona make the plans available to print or sell ?
@CineMoto24
3 жыл бұрын
Yes, I will be selling complete sets as well as distributing the STLs shortly. I will be making an update video once available.
@lucky2000m
3 жыл бұрын
@@CineMoto24 ok cool , looking forward to see , good luck
@DoubleADay
3 жыл бұрын
I don't know if you have checked out rc after darks channel but he puts his trx4 out in the cold for a while to acclimate but not the batteries. The snow doesn't stick after that. Very cool with the new track material
@DoubleADay
3 жыл бұрын
I also did the same motor swap on my betty
@CineMoto24
3 жыл бұрын
You know what I did see that video. Ive been meaning to try that method.
@bowtierj
2 жыл бұрын
very impressive
@kennethcartman473
3 жыл бұрын
Looking good dude! Can't wait to see the updates. Am guessing wider tracks or something to stop it sinking so much in the fresh powder.
@CineMoto24
3 жыл бұрын
Yes, I will be printing tracks that are about 5mm wider. The snow as seen in the video above is about as soft as it gets though so I was definitely happy with the performace!
@kennethcartman473
3 жыл бұрын
@@CineMoto24 Yeah looks So cool. Cant wait to be able to get the final stl files for somebody to print them for me. Have you seen the work Alkamotors has been doing on brushless escs. Plenty of power then. Fried my motor in the snow too lol :)
@kennethcartman473
3 жыл бұрын
@@CineMoto24 Check this out kzitem.info/news/bejne/s56P1YJoqIdomJg
@CineMoto24
3 жыл бұрын
@@kennethcartman473 Absolutely, I am still finishing up the design but I will let you know when the files are available. That is amazing! I will definitely keep up with his progress as well. I haven't seen that.
@kennethcartman473
3 жыл бұрын
@@CineMoto24 No worries and thanks. Till next time :)
@mylenrc8180
3 жыл бұрын
Sweeet bro, great mods!!
@kevkayla11
2 жыл бұрын
Just wondering if you sell 1/16 Revo tracks. I purchased some scx24 from you on Etsy last week didn't see them definitely would buy a set even if it is a wait time
@drodsrcs4137
2 жыл бұрын
I would like a set also for the E-Revo 1/16 scale. I just purchased one of your SCX24 sets. Let us all know.
@Teton30000
2 жыл бұрын
Have you thought about 1/10th scale tracks?
@CineMoto24
2 жыл бұрын
I actually just finished a project on those. Video to come soon. :)
@Teton30000
2 жыл бұрын
@@CineMoto24 cool what will they fit axle wise?
@patdud1979
3 жыл бұрын
I just wish the scx24 would have waterproof electronic 😩. These tracks would be great on a panda hobby tetra x1 🤙. Also if you double the track size for the scx24 would it float better in the snow and have more grip?
@CineMoto24
3 жыл бұрын
I ran my stock electronics all winter with no issues! I’m going to conformal coat before the next winter. But I’ll have to look up the panda hobby! Also yes it would! I just made the treads longer to help with grip but didn’t have a chance to test them extensively yet.
@Johnyboy-wj6ls
3 жыл бұрын
How much will they cost on scx24?
@CineMoto24
3 жыл бұрын
$75 a set of 4 plus shipping. I will post an update video once they are up.
@ezboyrc553
3 жыл бұрын
I've been following all your videos how can I get a set. I would take the test ones that ain't no good just because I would love watching you work on them and I'm broke. LOL but seriously how much are they and how can I get some?
@ToastyProductions.
3 жыл бұрын
You should 3d print a RC snowmobile
@Alphabet7
3 жыл бұрын
Great video tho
@CineMoto24
3 жыл бұрын
Thanks! I was contemplating no music but the screeching of the electric motor the whole time was extremely irritating. I’ll try no music with the next one. Thanks for the input!
@Alphabet7
3 жыл бұрын
@@CineMoto24 no I just meant the music in the beginning
@Alphabet7
3 жыл бұрын
@@CineMoto24 the music in the video is nice I just hate loud and annoying the first intro thing is
@Scrimjer
3 жыл бұрын
@@CineMoto24 take the volume of motor down, and the music on the intro is annoying
@billm4078
3 жыл бұрын
Will you be selling these for the scx24?
@CineMoto24
3 жыл бұрын
I am planning on selling them once I finalize the design. I will post a full video about the details once I finish the design and get the bearings in.
@Brighton_evans
3 жыл бұрын
who dislikes this? Great vid
@andrewbenson9191
2 жыл бұрын
How can I get my hands on a set for my EMaxx and or Erevo 2.0
@mr4x4s
2 жыл бұрын
Is there an anti rotation bracket designed into these?
@CineMoto24
2 жыл бұрын
Yes, it interfaces with the hub/knuckles to prevent total rotation.
@haydenkeeslar6348
Жыл бұрын
How can I get the STL files for these?!
@ArcticriderFPV
Жыл бұрын
What print settings do you have on your ender 3 with the ninjaflex? Is it bowden setup?
@CineMoto24
Жыл бұрын
I run a direct drive micro swiss setup on my ender for ninjaflex. Although, I did have success with a full bowden setup before I went direct drive.
@ArcticriderFPV
Жыл бұрын
@@CineMoto24 thanks! Just bought some ninjaflex for my ender 3, will try it on my bowden.
Пікірлер: 52