Timestamps Materials and initial table top setup: 2:58 Determining obstacles layout: 6:08 Gluing obstacles down, prepping for plaster: 10:20 Applying plaster sheets and spray foam: 12:38 Applying texture and detail: 17:14 Applying paint and extras for color/texture: 20:14 Adding moss and props for realism: 25:18 Rope bridge addition: 27:18 Semifinal product: 29:07 Overview and in-depth look at existing course sections: 30:25 Crawling runs: 38:17 Conclusion: 41:35
@1GhostLife
Жыл бұрын
If you live close to Ohio please try to come to hobby stop in east canton it is my uncles and he has the best croller course.
@Prone2Thrill
Жыл бұрын
I just ordered my first R/C in decades - a Traxxas Trx4m Defender and I just started making my portable log obstacle bridge at 56!
@CapeCrawlers
Жыл бұрын
Awesome! Have fun!! The Trx4m is a great little truck.
@tysonsmith9216
10 ай бұрын
I bought the trx4m so I could build a little indoor park. I love the truck and I love upgrading it. For me the traxxas servo was the first to go.
@Billyo234
8 ай бұрын
That’s how it starts lol then u have 15 of them might have been cheaper to take up a drug habit
@archerash6695
7 ай бұрын
I just bought the Vanquish VS4-10 Fordyce.. lol 43 years old and bored.
@415stunnaz
4 ай бұрын
Hell yeah good shit man this is such an awesome hobby expensive once you get in to it but even then its fun.my dad just bought a Rc and he's 75 lol he's has a buddy that finally convinced him and my son his grandson called him out to a rc race lol
@Rcdude2007
Жыл бұрын
That is by far the most capable scx 24 I’ve ever seen!!!!
@CapeCrawlers
Жыл бұрын
It's a monster!
@jamesmcnamara7484
Жыл бұрын
I’m going full time RV life. I have always been into off-roading. My first gig will be at “Ventura Ranch Holiday KOA”. I think I will be talking to management about making the drainages into crawler courses since the park has such extreme terrain changes. I will be showing them some of your videos to promote this idea. Thank you!
@CapeCrawlers
Жыл бұрын
That’s awesome. Keep me posted! I would love to see what you come up with
@mattdamron1827
Жыл бұрын
Please do! I stay there often and would love to have a nice course for my scx24 and trx4
@jamesmcnamara7484
Жыл бұрын
@@mattdamron1827 I brought it up to the management over Thanksgiving, they thought it was a great idea! If you see them bring it up, if there is interest in it, it will happen.
@jamesmcnamara7484
Жыл бұрын
If it gains enough enthusiasm, we could even possibly get them to have a hobby section at the store. The owner is pretty cool, and is always looking for ways to improve the park.
@jamesmcnamara7484
Жыл бұрын
@@mattdamron1827 Those storms that came through here made building off-road RC crawler courses unnecessary, the creek under went a whole transformation, there are miles of challenging terrain to play with now! It is awesome.
@brokenmonkeyrc8350
Жыл бұрын
Another great video. I am in the process of moving my outdoor course and I have been thinking about adding some of the stuff you did in your course. I have been hesitant as I have never done any of this type of modeling, but this has given me the confidence to try. So thank you for doing this video!
@CapeCrawlers
Жыл бұрын
Thanks for watching! It looks daunting at first, but it's pretty simple once you get going. Some of the viewers have given some good additional advice in this comment section too. Enjoy your course build!
@VS666
Жыл бұрын
thanks for the link, i dont know why i didn't just look at your channel for this haha, i think i found your channel right after you posted this but you post so much it got lost!
@thecampbells3908
11 ай бұрын
Looking good!!! I've used plaster in a lot of model railroad applications. When the plaster cloth is wet, you can smooth with your finger to spread over the holes. But if you're doing mod poge and texture it probably doesn't matter. I have a 4x8' table in my basement, but I learned quickly,,, you want the high terrain in the middle. Anything on the edge results in crawlers falling off the table. I'm about to build a new one in my 3rd garage stall. I should have about 10x12' raw to work with, not including standing space. My plan is to use as much natural material as possible, including a waterproof container to act as an optional real mud pit. Mine will be flowy though, with specific routes for competition, etc. I'll probably do a mural behind it for good photography. Maybe a Moab theme. Last of all, I'm using an old salt water reef tank full spectrum light, so it will appear like natural sunlight. Just gotta remember to wear sunscreen! 😂 I'll create a new channel and journal all of it too.
@austinpalmlund5054
Жыл бұрын
Hey man, great work on that whole course it’s beautiful. One word of advice I learned from my uncle, when cutting consistent lengths on a miter saw, put a clamp or something as a stop with the edge towards the blade the length you need I.e. 6” pieces call for a 6” stop from blade side to clamp side
@CapeCrawlers
Жыл бұрын
Thank you! Great tip, that would have saved me lots of measuring and marking!
@BigMountainCustomRC
Жыл бұрын
SO BASICALLY.....It's like building a model railroad layout. That's cool....I don't know why I didn't think of that myself considering I have a 42' X 16' N Scale model railroad......LOL .....Thanks Adam for knocking the cobwebs loose. Geeze........duhh
@CapeCrawlers
Жыл бұрын
Lol you’re welcome! A lot of old school train folks chimed in when this was posted with great insight from their model train experience. It definitely overlaps!
@madmaxx010
Жыл бұрын
Awesome!!! I'm ditching the real boulders in my house and trying this
@CapeCrawlers
Жыл бұрын
Way easier to move around than real rocks!
@AM_Animation_4
Жыл бұрын
I have my c10 almost maxed out and I have a jeep truck coming in a few weeks!
@CapeCrawlers
Жыл бұрын
Awesome! I hope you enjoy the gladiator!
@AM_Animation_4
Жыл бұрын
@@CapeCrawlers Thank You, you too!
@neilcunningham6282
Жыл бұрын
Ball up some newspaper and cover it with plaster cloth works great
@slowcrawlrc6163
Жыл бұрын
Great job on the video! I am in Central MA. My local hobby shop is RC Excitement in Fitchburg! Where are you located? I am always on the lookout for crawling locations.
@CapeCrawlers
Жыл бұрын
Thanks! I’m in Hyannis on the cape. You’re a ways away but maybe we could meet in the middle some time! There’s a big crawling event taking place Saturday at Wareham!
@RCTNT
Жыл бұрын
Just discovered your channel. New subscriber and new admirer right here - you are KILLING it here on youtube, wow! This course was a bunch of fun, you're easy to listen to and even seeing the power rack in the background (and your rad ink 'the struggle is the glory') are inspiring, I got a lot out of this little video. Great work, keep it up! -Craig
@CapeCrawlers
Жыл бұрын
Thanks for watching Craig! Glad you enjoyed it!
@AddictRC
Жыл бұрын
this is awesome i got a FMS 1/18 Hilux hoping to build this soon for now im building a little course for now im using left over wood and rocks on the work bench also your definitely 💯% the best youtuber and instagramer keep it up
@CapeCrawlers
Жыл бұрын
Thank you, I appreciate that! Enjoy the FMS!!
@sugatooth
Жыл бұрын
Really appreciate your videos, especially your Bronco build series. I just got my Bronco a few weeks ago and you gave me the confidence to start doing my own mods!
@CapeCrawlers
Жыл бұрын
Thanks for watching! Enjoy your build!
@robertbooth6884
Жыл бұрын
It's a great course and video but you need to add real rocks and a little more plant life making it look real world Great job keep up the great work ok.
@CapeCrawlers
Жыл бұрын
Thanks! I added some rocks after the video and painted them to match. I’ve also got some more plants but I haven’t opened the box yet. I’ll get there eventually!
@RCCrawlerz209
2 жыл бұрын
Duuuuude, you got a blue Gladiator like your 24! Lol Right on, bro! 🤟🏻😎 You should make your terrain park look more realistic, add some foam like grass, dirt, maybe some trees to give it that woodsy kind of feel, maybe for the canyon, maybe put a waterfall feature in there. I get these ideas because, before I got into this RC hobby, I watch these N Scale/HO Scale train layout train videos & that's where I get those kind of ideas from, especially when it comes to foam. lol Just putting some ideas out there. 😁
@CapeCrawlers
2 жыл бұрын
My big blue Gladiator is what got me into the 1/24 hobby! I saw the scx24 version and got is a novelty because it matched my big Jeep and now look what its done to me! The waterfall idea on the canyon is a great one, as is the organic material. I love to work on this stuff and I'm sure I will implement some or all of your suggestions this winter
@RCCrawlerz209
2 жыл бұрын
@@CapeCrawlers Sick, dude!! 🤟🏻🤙🏻🔥
@lightningspeed2479
7 ай бұрын
Thank you so much for this video! Bought my first trx4m, and I’m instantly hooked. Now time to start building my own course.
@acrccrawlers9548
Жыл бұрын
👍👍👍 great job brother course is looking awesome. Thanks for sharing.
@CapeCrawlers
Жыл бұрын
Thank you! I appreciate that!
@oohahitsanrccar1913
Жыл бұрын
Building my own on a small budget most materials are free except for glues, screws, foam and paints. my garage is almost taken over with 1/24 land 👍 new subscriber great video 😎
@CapeCrawlers
Жыл бұрын
Welcome to the channel and thanks for watching! The courses and scx24’s in general have major scope creep: they take over everything!
@oohahitsanrccar1913
Жыл бұрын
@@CapeCrawlers I have an Hbx Devastator a Carisma Subaru brat and my brother has Scx24
@mohinhcute8006
2 жыл бұрын
SCX24 Indoor Crawler Course Build and Overview so great, nice video
@CapeCrawlers
Жыл бұрын
Thanks! Glad you enjoyed it!
@jonnycrompton5088
Жыл бұрын
I needed to see that T-Shirt graphic today
@ProfessorTuukar
2 жыл бұрын
You could do an air soft bb mud pit in the middle somewhere!
@CapeCrawlers
Жыл бұрын
That’s a great idea!
@BlackCrownRC30
Жыл бұрын
My guy that crawler is 😮 wow amazing content
@CapeCrawlers
Жыл бұрын
Thanks for watching! The gladiator has been my project for this entire journey. I love it!
@andrewrichey7374
Жыл бұрын
Yes because that’s just one section then you just make another section and so on and then put them all together And you have one big course but each section is it’s own so one section don’t need a lot like you said don’t overcrowd yeah awesome
@SomeStrangemysterious
8 ай бұрын
Look to some of the better model train layout builders, for ideas and construction techniques. . They make some stunning scenery.
@milestone_media
10 ай бұрын
So you’re the reason there’s no 12ft skeletons lol
@isaiaht7956
2 ай бұрын
the 5 of them in the background 😂
@stevenking2469
3 ай бұрын
This is an awesome build!! I like the flex feature you put in. I didn't see it at first but that is great. I'm going to be building a course in the near future. I'm still gathering ideas. I'm very glad I watched this video before I started building. I think I would have tried to put to much into my build. Going to try and leave some driveability on the build. Every inch doesn't need a rock!!
@krashkingrc9715
Жыл бұрын
Very nice course definitely looks great
@CapeCrawlers
Жыл бұрын
Thank you, and thanks for watching!
@MoeDaMouth
4 ай бұрын
So an idea I was thinking... The cracks in the joint compound look a little too white. I wounder if you were to re-coat with a bit more but this time around add a bit of grey coloring to the joint compound a little lighter in color than the finished surface. Then when it cracks it would look a lot like natural rock. A lot of the expansion foam to me looks a little too much like foam as well. Don't get me wrong it all looks great but that might be a pretty good upgrade for later on. Color a bunch of joint compound and give it a full new coat to give the entire mountain a very natural look. Great course by the way, it is really inspiring me to make my own soon. Lastly, "Duh Dad, why else would we be outside with our work shoes on!" :D
@austinholdaway9481
Жыл бұрын
Thank you for the video! I am curious, how do you stabilize the build? For instance, at 6:08 you can see the table wobbly, mine does the same but at 21:58 you added some side supports it looks like and some leg support? Could you add all the measurements used in the description, as a viewer I can't find out how you attached the supports and what sizes? I'd love if you could possibly post a follow-up video of you actually assembling the table and the supports? Thank you again! I LOVE the content!
@mdemers767
7 ай бұрын
Great build, but I think the rope bridge makes it look too busy (and the logs are set too close... need a smaller diameter logs, set further apart). I think a small trestle bridge would have been a better look, been more in keeping with the New England look, and could have been made challenging with small missing sections of the decking. Of course, this would have been WAY harder to build than the simple rope log bridge, and I understand that in keeping the video a shorter length, the rope bridge was the way to go. Maybe a teeter-totter type bridge...
@SKHobbiesAZ
Жыл бұрын
Great course build Adam! We have built 1 4ft x 4ft section for us so far. We are looking at building us an indoor "L" shape course here soon. You have inspired me on some awesome ideas!. Thank you!
@CapeCrawlers
Жыл бұрын
Thanks for watching and I hope this helped you with yours!
@andrewrichey7374
Жыл бұрын
That’s awesome dude, here in my little town of Manchester I do mean little, but the people really decorates up front of their houses for Halloween. Someone’s got the 10 feet tall skeletons they are awesome . Hope you show more of yours looks pretty awesome
@The_RC_Guru
Жыл бұрын
Must be Manchester IL huh?
@boiledtea479
9 ай бұрын
I want/need to finally build one myself. Dont really know how so this video did help alot. Now i just need money for the materials (paint,plaster sheets, styrofoam etc.). I have some wood and cardboar boxes home so i think thatll be fine.
@waltersobchak5103
Жыл бұрын
Just found you. Thank you so much for this. I’ve got little to no skills but I think I’m going to try. Nothing to lose!
@CapeCrawlers
Жыл бұрын
I had no skills or experience when I did my first course build and it came out alright! You got this 👍🏻
@agautoworx5346
2 жыл бұрын
That's awesome! You've got me hooked on these crawlers. I've made 2 small courses already. Yours look amazing tho. Great video
@CapeCrawlers
2 жыл бұрын
Thank you! These things are super addicting!
@KyleKick909
8 ай бұрын
I'm building a small course on top of a flat cardboard box. I'm gluing boxes and foam down to make the park and then paper mache on top of everything. I started yesterday and should be done today.
@outdoororiginal4364
7 ай бұрын
What great ideas… thanks for sharing that. I live in the flat lands of south Florida so I don’t have mush to model after but I’m gonna try something like this. Looks fun. Thanks for sharing. God bless.
@SinisterDeeds214
8 ай бұрын
At this point in the gladiator build...what servo was you usuing? I'm new to rc and got the emax, but I feel it's underpowered on my course.
@brownriceprod
9 ай бұрын
i feel like you cant fail with that car though... it's sickness don't get me wrong, but i would rock a closer to stock 24 for greater challenge (even though i know a stock 24 couldn't do half those obstacle)
@JediContrast
Жыл бұрын
Well, this sure does beat hauling boulders down into the basement XD. thanks for sharing the process, my son and I are taking notes.
@CapeCrawlers
Жыл бұрын
Thanks for watching! I totally agree. I filled my sons sandbox with rocks one time and after that I thought nope, not again 🤣
@JediContrast
Жыл бұрын
@@CapeCrawlers Boulders are merely giant grains of sand...glad I opted for the tractor instead of a sports car XD
@CrawlerTrax
Жыл бұрын
VERY WELL DONE! We are impressed! It's awesome to see your process. We have watched a ton of crawler course build videos. Thanks for sharing this!
@CapeCrawlers
Жыл бұрын
Thank you! It’s a fun project and will be great for our long winters up here.
@JonnyB2597
Жыл бұрын
Great video and great detail to the course. I have been working on mine for the last year or so, I just keep adding something new. I have added a river with epoxy! Very cool stuff to use and looks great when it’s done. I made my course mobile as well. Two 2x4 sheets of MDF. Catch is all side line up so I mix up like a jig saw puzzle. Some times it’s 4x4 and sometimes it’s 2x8. Keep building. Cheers.
@CapeCrawlers
Жыл бұрын
Thanks for watching! Your course sound great. I would love to do a water feature. I may carve one out in the new canyon feature at a later date. We’ll see how brave I feel!
@GeorgieBud2020
4 ай бұрын
Hello cape crawlers! What did you use to cut/trim the styrofoam insulation sheet? Thank you!
@davidyeats6609
Жыл бұрын
Hey Adam…. I’m going to model your course. I think it’s got a number of great continuous obstacles and climbs. Thanks for all the advise, and ideas to use. You’ve got a great layout for an indoor course. Love your rigs and informative videos. Thanks bro 💪😎👊
@CapeCrawlers
Жыл бұрын
Thanks David! Enjoy your course build!
@gibsonlife573
Жыл бұрын
Thank you this will help a lot
@CapeCrawlers
Жыл бұрын
Glad it helped. Thanks for watching!
@BudgetRC_Channel
Жыл бұрын
This is great. I've been thinking about doing a mini course in my basement and this video will be a ton of help. Thank you!
@CapeCrawlers
Жыл бұрын
Thanks for watching! Glad it helped!
@RC_COUNTRY_SHORTS
Жыл бұрын
Do you let your kid drive the rc cars
@CapeCrawlers
Жыл бұрын
Oh yea, he has a bunch that he wont even let me touch! LOL
@drtythrty4018
Жыл бұрын
I started listening vs. watching at 6:00 and then flipped back at 30:00 and went WOAH! Nice work.
@CapeCrawlers
Жыл бұрын
When it starts to take shape it changes quickly!
@Truckinitup26
8 ай бұрын
Is there a video to that SCX24 build, I’m trying to achieve that level of flex?!
@Matt-it8jh
Жыл бұрын
Man you rock haha. Well done your videos have made a world of difference in my c10 and deadbolt builds. Great tips awesome ideas, keep it up.
@CapeCrawlers
Жыл бұрын
Thank you, I’m so glad they are helping!
@larrysdustyattic7110
9 ай бұрын
Thanks for posting this. I am retired and looking for something to occupy my time Thanks
@motosessions
Жыл бұрын
Really surprised you didn’t make a scale jeep from the Jurassic Park movie and add all them Dinos on the course for realism
@HobbyPerfeXion
Жыл бұрын
I've been thinking about starting a mini indoor course and this gave me some great ideas, so thanks! I'm also from MA and looking to get something going before winter so perfect timing finding this vid. I'm just getting into the mini scene and have a SCX24 and an Enduro24. Would be great to have something like this to bash around on. Never made any indoor courses before but have made some outdoor tracks in the past - getting creative with things like table top jumps and banked corners using just stuff I had laying around to make things work. I guess my only thing I would want to incorporate into an indoor course that yours doesn't have is some real dirt paths to test traction etc. and maybe a water feature. But the stuff you've done here certainly showcases a lot of great techniques to build the base and add on to with other elements. Good stuff - got me to subscribe. Just getting started with my channel - check it out if you get a chance.
@CapeCrawlers
Жыл бұрын
Thanks for watching! Glad it was helpful! We need these indoor courses to keep us busy in the winter.
@Rstpete1
Ай бұрын
New to 1/24 but an old time RR layout builder and the techniques you used are spot on.
@tariqrahman6918
3 ай бұрын
Mate I like your hat - doesn’t look like it’s made in China either - where can I get one? Cheers dude great work there
@haha14544
Жыл бұрын
I'm in the middle of my first little course build. I'm using mostly blue foamboard trying to get some height out of it, with multiple "floors"to the structures. Turning out pretty neat but I guess we'll see when it's all done!
@CapeCrawlers
Жыл бұрын
Sounds awesome! I really like the multiple floor approach. Good use of space and really technical!
@rcontrack5408
Жыл бұрын
Give it a couple of days the spray in foam falls apart real quick not to bum you out I built a really nice piece I called the rut and it fell apart on me quick put plaster over that spray in foam and it should last the glue down Moss don't run it over ever cuz it'll peel right off unfortunately and anywhere your tires hit any kind of foam it's definitely going to burn right through your pain. Overall it looks nice though
@CapeCrawlers
Жыл бұрын
I’ve had pretty good experiences with the spray foam holding up. Mini Moab, the big spray foam section is about ~6 months old now. The moss, plants, and other accents do need constant attention to keep them nice though. And the paint rubs off of the styrofoam pretty quickly. But structurally I’ve had good luck.
@maksimlang2299
Жыл бұрын
When I get enough money, I'm gonna recreate that super flex Jeep that you have
@sylvainparadis1588
8 ай бұрын
Does he produce some more for sale... Sylvain from Montréal
@andrewrichey7374
Жыл бұрын
Right on have your crawler with you as you build Yep
@Highoctanenerd
2 жыл бұрын
This is great! With cold weather coming, we are getting ready to start our indoor course as well. The fake grass and rock really helps give a more realistic look. Now if only scale model trees weren't so ridiculously expensive...
@CapeCrawlers
2 жыл бұрын
Glad you liked it! I agree regarding the plants/trees. Even the little tiny plants are very pricey!
@NEO-RC
Жыл бұрын
I’ve done a 1/10 scale outdoor course at my house but looking into one of those mini crawlers (for winter) and an indoor course. I really like the plaster sheets and the expanding foam. Just curious why you didn’t cover the foam insulation sheets with a little plaster to make look a little more natural? Either way, it looks really really good. Great job 👍
@CapeCrawlers
Жыл бұрын
I've tried doing the sheets over the foam and it didnt take. Because the foam flexes underneath I couldnt get the sheets to adhere properly. I may have done something wrong but I had a difficult time with it
@nathanielulian600
4 ай бұрын
the way you said this was perfect. kzitem.info/news/bejne/qm6rz5iMkZZ9npw
@wlstoolman
Жыл бұрын
Great video and tutorial. I am getting away from bashing and into crawling. Love the course ideas, easily obtainable materials! Looking forward to watching more and can’t wait to get started on mine!
@CapeCrawlers
Жыл бұрын
Thanks for watching! Enjoy your course build!
@shakinbass_5318
4 ай бұрын
Can you do a video walk through of the upgrades u have on that jeep??
@rekik66
2 жыл бұрын
Looking good!
@CapeCrawlers
2 жыл бұрын
Thanks!
@skipjohnson9358
Жыл бұрын
It’s 🔥🔥🔥🔥🔥🔥🔥🔥bro
@CapeCrawlers
Жыл бұрын
Thank you!
@remyKhuong
29 күн бұрын
Love this
@REACTIVETERRAINRC
Жыл бұрын
*Dude nice trail we built a scaled terrain for our mini crawlers and ours just keeps growing and growing.
@CapeCrawlers
Жыл бұрын
Your setups are amazing!
@melmenterefordres5079
11 күн бұрын
Walker Laura Robinson Brenda Young Susan
@andrewrichey7374
Жыл бұрын
Yeah it’s the same thing here in Manchester Michigan almost Halloween the weather is definitely changing quick that’s the beauty of the 1/24 scale yeah
@CapeCrawlers
Жыл бұрын
They're great to have fun in small spaces!
@HARRYS_SLOTCARS_N_RC_CRAWLERS
6 ай бұрын
Thank you for showing us your complete track build 👍I have watched many hours of your crawler posts, and it's great to see your course build in Detail 🤗 Greetings from Northern Europe....Harry
@victoravina409
Жыл бұрын
can we get an invite 🙄
@CapeCrawlers
Жыл бұрын
Come on over!
@mikecrystalrobert7898
Жыл бұрын
What a wicked little crawler
@CapeCrawlers
Жыл бұрын
Thanks! It's a ton of fun
@trailcrawler2038
Жыл бұрын
Yea. I'm building my 2nd custom 1/24 and then on to an indoor course. Here in CT... at about mid Nov, early Dec I don't hit the trails either.
@CapeCrawlers
Жыл бұрын
You're not far from me (I'm in MA). Time to prep for hibernation for us 😆
@KPtain_RC
19 күн бұрын
Really nice project and a great video! I like it 👍
@andrewrichey7374
Жыл бұрын
A section where you’re looking over a canyon and to get to the other side there’s only two ropes going across that’s the rope bridge I’m talking about just the rope we set one up for the width of our rigs on one side we ran two strings a rope for that a little wider chassis or wheelbase lots of fun just a thought hope you use it
@CapeCrawlers
Жыл бұрын
Thats a great idea and sounds super technical!
@keithlea6804
Жыл бұрын
Foam coat is a great and durable material. Making foam rocks for the crawler corse. Foam coat factory for all your foam needs. Nice build keep us informed on how. Durable the plaster is.
@CapeCrawlers
Жыл бұрын
Will do!
@johndeesfpv9289
Ай бұрын
i'm going to do one this fall , thanks for the ideas.
@blakedavis5617
8 ай бұрын
I can’t stand the breathing I dead ass had to turn it down a lil
@BermPeakClips
Жыл бұрын
Where did you get the interior for the gladiator
@CapeCrawlers
Жыл бұрын
It’s comes with it from the manufacturer
@BermPeakClips
Жыл бұрын
@@CapeCrawlers is the gladiator the only one that comes with the interior
@CapeCrawlers
Жыл бұрын
@@BermPeakClips the bronco does as well. I believe those are the only two
@SpinRush
Жыл бұрын
Where’s the video on the SCX24 Jeep that you built? I wanna see that.
@CapeCrawlers
Жыл бұрын
Right here: kzitem.info/news/bejne/1nd9vKOgrIByl5g I’ve changed some stuff like the furitek brushless motor, shocks, and wheels. Otherwise it’s pretty accurate
@13racecar31
10 ай бұрын
Do you rent out for adult birthday parties? 😂
@AaronRobertson
Жыл бұрын
Súper cool. I did mine as a Utah themed course built on a 4x8’ plywood. I like the mini Moab details.
@CapeCrawlers
Жыл бұрын
Just checked out your course, it's amazing!! Great work!!!
@AaronRobertson
Жыл бұрын
@@CapeCrawlers appreciate that, thanks. I am hoping to add some plant life this week.
@joseaponte2829
7 ай бұрын
Wow thanks for this wonderful video on building a course. It was one of my next questions, but pretty much you got it covered. Now I have a plan on how to start working on one for myself at home. Thanks Adam
@andrewrichey7374
Жыл бұрын
Heck yeah man outstanding 👍👍😎 You sure gave me some great ideas appreciate it. Will catch you on the next one
@aledgerly1188
10 ай бұрын
Excellent video. I'm just getting ready to start my indoor course for my 1/18th scale. I'm just getting into the hobby. You have given me a lot of great ideas. Thank you.
@WhoElse627
Жыл бұрын
What battery upgrade do you recommend? Like watchin yer videos🤙🏼
@CapeCrawlers
Жыл бұрын
I really like the EcoPower trail batteries. They’re 450mah but have great run time and they’re small, making fitment easy
@andrewrichey7374
Жыл бұрын
I love mini Mayham I like how you touched it up with the black looks like trucks has been driving up and down it for a while super cool
@andrewrichey7374
Жыл бұрын
Dude there’s definitely something to be proud of wow that’s beautiful man I love it I really appreciate this video you sharing awesome
@Norcal_Flyways
Жыл бұрын
What are your favorite scx24 tires for outdoors
@CapeCrawlers
Жыл бұрын
The LGRP swamp kings are my favorites!
@Norcal_Flyways
Жыл бұрын
@@CapeCrawlers have you ever tried out the new injora mud terrains they look pretty good
@CapeCrawlers
Жыл бұрын
@@Norcal_Flyways you mean the brand new 64mm ones? I’ve got some of those in order. Very excited to get them on and try them out!
@Norcal_Flyways
Жыл бұрын
@@CapeCrawlers yes I do and hopefully you make a vid on them I’m looking for some new tires and I like the big ones just don’t want to spend 50$ for a set of 4
@Ashbidoof
9 ай бұрын
Great work. Love the thoughtfulness and detailing. Can Waite to build mine!!!
@andrewrichey7374
Жыл бұрын
Awesome, I’m here watching for this yeah super cool 😎👍👍
@bassflyer
Жыл бұрын
Maybe I missed it , but how do YOU cut & trim the pink foam board? Thanks!
@CapeCrawlers
Жыл бұрын
I used a jigsaw
@provousa2253
Жыл бұрын
Just got me an Scx24 with brass upgrades. Its the blue gladiator you have lol
@CapeCrawlers
Жыл бұрын
Awesome, enjoy!!
@momthemeatloaf
Жыл бұрын
What axles are you running on the gladiator? And do you have the extended hub weights on them ??
Пікірлер: 327