Thanks for the support! Great video on how a build should be tackled!
@bcochener
Жыл бұрын
Hell yeah brother! Thank YOU for the great chassis and wheel design!
@gibsonlife573
Жыл бұрын
Really badass truck I wish I would have been able to get one of the Nano Beast
@bcochener
Жыл бұрын
Thank you! Don’t fret, the new Nano Bam is even better, only 1g heavier, same diameter… just a tad longer than the Nano Beast. Really liking them just as much or more than the Nano Beast.
@BigMountainCustomRC
Жыл бұрын
Nice build, brother. In the beginning, it took me some getting used to your preferred method of creating content. However, once I got used to you not showing the process, I gotta say, now I love your content. Your attention to detail has made you a ROCK STAR in my book. Keep on Rocking, Brian. I'd love to do a collaboration with you. I'm a custom painter by trade and I think we could come up with something nobody else is doing. If I've piqued your interest, hit me up...anyway...keep on keeping on....🤙🏽
@bcochener
Жыл бұрын
Thanks so much! Yeah, I just don’t like the turning screws approach (especially when sped up), so I just go over everything in detail and tips and tricks as needed along the way. Honestly, one build video is multiple sessions for me building (little here, little there over a week or weekend, so it is much easier this way for me. Glad they are proving useful. -Honestly, half the reason I do them is so I can remember what I did on every build!! My plate is pretty full at the moment, but maybe a future collab of some sort. Who knows… thanks so much for watching. Cheers brother!
@SRC3D
Жыл бұрын
So clean. I gotta get a themed build going. The chassis looks so good all black and silver.
@bcochener
Жыл бұрын
Appreciate that!
@PSYCHO13GARAGE
Жыл бұрын
AMAZING work Brian! Man you kill it every time. I love the livery on the body. Well done! Beautiful rig of course. nice peek a boo servo window as well. Stellar work my friend!
@bcochener
Жыл бұрын
Thanks Dirk. I found without scale detail to add, all you really have is stickers…. Haha. -That little hood hole did turn out pretty good.
@Ddigzdirt
Жыл бұрын
that one pretty build 👍
@DoubleADay
Жыл бұрын
That is an awesome looking build. It should dominate any competition
@bcochener
Жыл бұрын
Thanks buddy! For not being a scale build, I am pretty pumped about it! That chassis is just a work of art. Shame it took me so long to finish it up!
@DoubleADay
Жыл бұрын
Don't feel to bad. I still haven't finished mine
@scx24socalsloths92
Жыл бұрын
Another great build, I really appreciate your videos man!
@bcochener
Жыл бұрын
Thanks for tuning in!
@durangatangrc
Жыл бұрын
Awesome build!
@javierenriquelopezparra6046
Жыл бұрын
Sweet assembly, simply extraordinary. Dremmel is the way.
@bcochener
Жыл бұрын
Thanks, and yeah the Dremel is priceless!!!
@AgeOrmstad
Жыл бұрын
Sweet 😉💪
@bcochener
Жыл бұрын
Thanks 😆
@scottmichael7178
Жыл бұрын
what HR shocks are those ? Love the proline body, I have that on my 1/10 yeti. One of my favs. Nice job on the build, very clean 👌
@bcochener
Жыл бұрын
Thank you! The LT Oil shocks are shown on part 1: kzitem.info/news/bejne/knd6tKh7qZOmY6g
@mattharris1775
Жыл бұрын
Very nice finish build 🔥🔥🔥🔥
@bcochener
Жыл бұрын
Appreciate that Matt!
@thepdc6220
15 күн бұрын
I’ve watched this video and the other two videos and fell in love with this car. Please please tell me if it’s ever available
@bcochener
13 күн бұрын
I’ll keep you in mind. Cheers!
@thepdc6220
2 күн бұрын
I’ve got everything ordered. Couldn’t wait. Lizard ultimate doesn’t seem to be available anymore. What gives? Any idea?
@bcochener
Күн бұрын
@@thepdc6220 they disco’d the Ultimate. I love that ESC too. You’ll have to go with a different one.
@sammyboswelldirtybrc7580
Жыл бұрын
That’s a sweet looking rig Brian 🔥🔥😎👍
@bcochener
Жыл бұрын
Thanks Sammy!
@rekik66
Жыл бұрын
Well done! 👏🏼👏🏼👏🏼
@bcochener
Жыл бұрын
Thanks bud!
@CrawlDaddyRc
Жыл бұрын
🔥🔥🔥
@thedailykrawl7084
Жыл бұрын
Masterpiece!!!
@bcochener
Жыл бұрын
Appreciate that!
@bcochener
Жыл бұрын
It only took me 3 months… LOL
@thedailykrawl7084
Жыл бұрын
Gosh, it looks really really good tho. Is someone every really finished building, lol. I’ve got all kinds of plans for the builds I’ve technically already finished. Lol, new parts keep coming out and I’ve got new ideas to make things better. I’m waiting on the same battery for my cheat code. I had different electronics at first as well. Ditched the pro and BEC for the new tegu main board. That lizard ultimate looks incredible. The only reason I went with the new tegu was because everything was included, an all in one square package. I’ve had pretty good luck with the avatar. I like the small controller for the small rigs. I can travel with my scythe and cheat code no problem. Takes up virtually no space at all. That tiny receiver looked amazing tho, I might try the fly sky thing one of these days. You’ll love how your rig performs, I’ve been raising my chassis higher and higher, which means it will no longer rest on its side. But wholly heck did it improve its overall performance. Mine was too low at first and now it glides over everything and doesn’t seem tippy. Yours looks like it will tear it up!! Nice work Brian!!! Very nice indeed!!!
@nooynator3005
Жыл бұрын
Very nice build. Where can i find the Body?
@bcochener
Жыл бұрын
Thank you. It’s the Proline Cliffhanger 1/24 body.
@ronaldallanperez3064
Жыл бұрын
Awesome build! BTW, What kind of radio and receiver are you using? That receiver is super tiny and I like it!❤
@bcochener
Жыл бұрын
Thanks! I’m using a FlyskyGT5 and that micro 4CH receiver is off of Amazon… but you have to solder on the plug tangs yourself.
@rockwolfdesigns6384
Жыл бұрын
What can I say. It's exactly the way it should be.
@bcochener
Жыл бұрын
I fully agree!
@toycoma98
Жыл бұрын
What did you use for shock spacers? At first you used plastic, now they look metal. What is the difference between cheat code, killr, and bully chassis? This is a great build, I have a toyota hard body on my stock deadbolt chassis. I want to build a comp build but everything is sold out. Cant get the super 8 axles because axle shafts are sold out. Cheat code and bully chassis sold out. But i dont know the differences between cheatcode, killr, and bully.
@bcochener
Жыл бұрын
Good eye! I swapped in some HR spacers I had. They come in packs with 4-5 different widths. - not sure about the bully. Don’t own a Killer, but want one. Absolutely can’t speak highly enough of the CC Chassis. I bet any of the 3 would be great. Don’t forget Mofos V3 UAF is out now. Sucks about the super 8s. I was able to pick up a second set of metal housings, I had leftover front inners to use until the CVDs are back in stock… if I even get to them by that point.
@toycoma98
Жыл бұрын
@@bcochener nwchassisworks bully v2. I think the difference is the skid plates, bully uses stock skid and the killr and cc uses flat skids requiring custom links. Was also looking at Akers engineeering gecko24 but i dont like how you have to glue the trays directly on the frame. Mofos uaf chassis has a front battery tray which would be ideal for brushed motors. I dont know which chassis to buy. I already have the proline body and micro komodo motor. What is the part number for that HR spacer?
@bcochener
Жыл бұрын
@@toycoma98 you can always flip the skid/trans on brushless to run the batt forward. Not sure the part number on those. Got em off eBay a while back.
@dillaboo16
Жыл бұрын
@@bcochener the cvd are in stock now.. and did you have trouble getting worm gear into the front axel housing?
@bcochener
Жыл бұрын
@@dillaboo16 Thanks. I already put them in this build, and have another full allloy S8 set ready to go with them. Really got to jump on those things! I did talk about that diff cover issue. I just had to back off the screws a tad to get a nice free spin. I could have just removed an o-ring as well to give it the play it needed.
@dillaboo16
Жыл бұрын
Do you know were i can find the galaxy battery or something simular in size. Maybe you could grab some dimentions on battery i would prefer to run gens ace if they offer something in same dimentions give or take
@bcochener
Жыл бұрын
Battle Bots and Robot Marketplace I believe were the 2 places I ordered from. 300:44/15/18, 250:40/14/20. That’s is the cell pack size, not including the wire bulge/exit on the end.
@dillaboo16
Жыл бұрын
@@bcochener what is a good charger for the galaxy 3s 300mah
@bcochener
Жыл бұрын
@@dillaboo16 any charger with a balance port will work. Do not use the stock USB junk.
@dillaboo16
Жыл бұрын
@@bcochener right but as far as charge rate. The lowest my current charger will go to is 1 amp you think that will be fine
@bcochener
Жыл бұрын
@@dillaboo16 maybe. Technically you should charge a 300Mah at .3 amps. 3000mah at 3 amps. So it’s up to you. Could try it and keep an eye on it charging.
@dillaboo16
Жыл бұрын
Hey buddy is the positive terminal on the esc the terminal on the inside closest to the power button?
@bcochener
Жыл бұрын
On the Ultimate ESC? You can only plug into it by their plugs, so only one way to do it.
@eaSports1990
Жыл бұрын
Hello, you don't happen to have a shipping list to link me to the whole build?
@bcochener
Жыл бұрын
Check out part 1 of the build for the parts used: kzitem.info/news/bejne/knd6tKh7qZOmY6g
@Grayson-dk7
Жыл бұрын
What’s the wheelbase measurement?
@bcochener
Жыл бұрын
137ish
@dillaboo16
Жыл бұрын
What motor mount are you using?
@bcochener
Жыл бұрын
The aluminum Albins mount. Mofo now sells his own black aluminum mount for the Nano Beast.
@dillaboo16
Жыл бұрын
Okay thats what i was getting at Was if the mofo mount will be about the same position as the one you are using
@bcochener
Жыл бұрын
@@dillaboo16 yes, both are the forward facing mount.
@dillaboo16
Жыл бұрын
@@bcochener cool do you have an i.g? I followed you on reddit
@bcochener
Жыл бұрын
@@dillaboo16 I don’t.
@Gear_head11
Жыл бұрын
Any chance you wanna sell the double stars??
@bcochener
Жыл бұрын
Not at the moment, thanks.
@gibsonlife573
Жыл бұрын
I thought it was only a cheater if you put it on the rocks LOL
@rrzrrich
Жыл бұрын
What brand is the micro receiver you are using on this current build, by chance what protocol is the receiver thank you for the quality builds and organized videos 🤙🏼
@bcochener
Жыл бұрын
Using it with my FS-GT5 TX. I think it is a fairly generic brand - FEICHAO FS2A-4CH AFHDS 2A Mini Compatible Receiver PWM Output for Flysky i6 i6X i6S Controller. You do have to solder on the plugs/pins. Here is the link from Amazon: smile.amazon.com/dp/B081CJFVFV?psc=1&ref=ppx_yo2ov_dt_b_product_details
Пікірлер: 78