on the green deadbolt with the deadbolt rear in the front, the lower links are 68mm, use c10/jeep/bronco rear lower links (58mm) on the upper front to correct the servo pitch
@x_HuLiMaKaFLip_x
Жыл бұрын
Thanks for the inspiration! 👍🏽 this is ultimately the look I want my C10 to have. Real nice, sir 🤙🏽
@tcbrc7555
Жыл бұрын
Thanks man..
@CaseyD406
Жыл бұрын
Very well done mods. New to the 1/24 scale here. Just got the C10.
@tcbrc7555
Жыл бұрын
Thanks bud
@ljaysperspective1775
Жыл бұрын
Rigs look great, I have mostly 1/10 scale among other RCs but these are great to have and detail. I enjoy this hobby but it's like getting a tattoo, once you have one, eventually you'll get another and another lol. Thx for sharing. 😉👍
@thomashanns3635
Жыл бұрын
Some of the best upgrades I’ve seen amazing all of them.
@tcbrc7555
Жыл бұрын
Thanks buddy..
@rjlinnovations1516
Жыл бұрын
Thank you for sharing your videos. Watching with full support from Canada 🇨🇦.
@rjlinnovations1516
Жыл бұрын
You’re welcome 🙏
@tcbrc7555
Жыл бұрын
Hey appreciate it
@backdoorfourx4rc
Жыл бұрын
Great job my friend!!🤩👍👍👍 I had a friend build a Dead Bolt after seeing your video. It is very wicked!! I have done the front on my C10 with a extra set of stock C10 rear links. *You changed the game with this stuff* !!🤜🤛 💢Subscribed💢
@tcbrc7555
Жыл бұрын
Appreciate it buddy
@Cad1900
Жыл бұрын
Nice rigs I love them and great video!
@tcbrc7555
Жыл бұрын
Thank ya bud..
@Stickies72
Жыл бұрын
Very cool, just got a SCX24 deadbolt myself. I have been doing RC for a long time but totally new to the 24th scale. Very much like what you have done with yours, the stretch look is awesome. A fellow E. Tenn resident as well!
@tcbrc7555
Жыл бұрын
Right on buddy appreciate it..
@tomunexplained7743
Жыл бұрын
Very cool! This is a fun hobby I come from an ATV background as well but this is way easier on the wallet to modify! lol
@ccgcon9574
7 ай бұрын
I have 2 scx 24s (jlu and gladiator)and I have a turbo rzr and I see the correlation for sure. And agreed both are expensive but enjoyable. Great vid Cheers
@rockwolfdesigns6384
Жыл бұрын
Hell yeah brother I just found you pretty cool man checked out a few of your videos. Going to have to check you out some more.
@DuanDao
Жыл бұрын
That's one of my biggest gripes when you install long travel shocks. It's great for articulating but not so good on climbs and it jacks up your ride height. I had to reposition my shocks to bring it down a bit
@arthurbowesr7773
Жыл бұрын
Good to see you here brother. Good meeting you!
@tcbrc7555
Жыл бұрын
Hey Yesssirrr same here..
@andrewrichey7374
2 жыл бұрын
I like how you extended the deadbolt body I think looks super cool. I’m watching from Manchester Michigan, I did just subscribe I’ll be following for more, this is the beauty of this awesome hobby yeah love it
@tcbrc7555
2 жыл бұрын
Right on buddy greatly appreciate it.
@andrewrichey7374
2 жыл бұрын
Yeah that was nice, yeah I can see big difference awesome
@BlackSmithRC
Жыл бұрын
Great stretched SCX24s bro! One of my builds...MAD MAX...has the deadbolt rear on front and its perfect articulation. And yes it's still 1/24 scale all day long.
@tcbrc7555
Жыл бұрын
Hey appreciate it buddy thank you..
@traviselliott1284
Жыл бұрын
I don't know if they do it for all of them but I ordered a c10 a while back. Well they sent the deadbolts driveshaft with it, Just got a deadbolt less than a week ago and it came with a c10 driveshaft! Ordered high clearance links to stretch the rear of the c10. I thought I was going to have to order another driveshaft but the one that came with the c10 fits perfectly! Have some c10 injora high clearance 4 links coming in Wednesday to stretch the front of the deadbolt as well. Hopefully the driveshaft that came with the deadbolt fits the front as its a little loose when the suspension is maxed out.
@dirtbikeboy66
Жыл бұрын
If you need little nuts like that, just drill little holes in pieces of plastic. Plastic is usually soft enough to self tap with the screws.
@jjcole8192
Жыл бұрын
I like the wheels on the green c10
@tcbrc7555
Жыл бұрын
Appreciate it bud SSD beadlocks.
@jjcole8192
Жыл бұрын
@@tcbrc7555 thank you
@tcbrc7555
Жыл бұрын
@@jjcole8192 yessir
@joneskids8491
Жыл бұрын
That car is so cool
@orrc16
Жыл бұрын
Really nice vidéo 👍😉 good job my Friend 👍
@tcbrc7555
Жыл бұрын
Hey appreciate that thank you.
@stevons
Жыл бұрын
Good video m8 ❤
@tcbrc7555
Жыл бұрын
Thanks bud..
@cardboardcrawlersrc8805
2 жыл бұрын
It’s to scale for sure. Winding if those are the rc lions 48 mm shocks under it(green deadbolt)
@tcbrc7555
2 жыл бұрын
No sir it’s 43mm from Injora.
@D-ayytoodap-yay
Жыл бұрын
I am building a Betty from the ground up and I am using gladiator links and a Jeep jlu frame. I love the long wheel base because it does the best crawling imo. Short wheel base is good for missing, the long wheel base is good for a belly dragger that can climb the world
@tcbrc7555
Жыл бұрын
Yessir…
@D-ayytoodap-yay
Жыл бұрын
I have built 4 new crawlers for myself since I commented on your video and all of them are gladiator link trucks with shorter lcg chassis. The longer wheel base is the best way to go. I have a couple c10s and they are not stretched and they have nothing compared to the gladiator length trucks. I run brushless furiteks on most of my rigs and I will say that nothing is like a brushless truck with the longer wheelbase.
@tcbrc7555
Жыл бұрын
@@D-ayytoodap-yay right on buddy…
@jimbo4203
2 жыл бұрын
I bet that Kawasaki is fun , i got a plate on my viking and go everywhere here in Tennessee, nice scx24 's , i love mine
@tcbrc7555
2 жыл бұрын
Yeah love the Kawi. We mainly ride at Windrock but on occasion venture out to Royal Blue, Tackett or Brimstone.
@andrewrichey7374
2 жыл бұрын
Bumper bracket is what it’s called, I see you flipped it to put the bumper up higher. They have a relocation bumper bracket I got a couple of them for my bronco it just bolts to the frame and straight out instead of Dropping down then out works great
@tcbrc7555
2 жыл бұрын
I’ve been debating on losing the bumper on my bronco but I may get another bracket and try it don’t wanna lose the bumper but it seriously gets in the way.
@CrawlDaddyRc
2 жыл бұрын
Bad A$$ - great content!
@tcbrc7555
2 жыл бұрын
Thank ya sir..
@MarcoRCArena
Жыл бұрын
great my friend!
@tcbrc7555
Жыл бұрын
Thanks buddy…
@1rcbking
6 ай бұрын
Thanks for sharing, very helpful
@tcbrc7555
6 ай бұрын
Yessir glad I could help..
@1rcbking
6 ай бұрын
@@tcbrc7555Sorry if I missed it, but what did you do about the drive shafts, Thanks again
@tcbrc7555
6 ай бұрын
@@1rcbking used the driveshafts that goes with the links
@RETR0_V0ID
Жыл бұрын
What do you do with all of the front links and driveshafts? Can you get just the rear ones?
@CoolHandLukeZ
Жыл бұрын
Not sure if you figured out your flipping problem on the red deadbolt yet, but I think using some limiting straps at the center of the front and rear axles really helps. As long as you put them in the center (I use fishing line) then you can keep the long travel of the double barrel shocks but keep both sides from extending all the way at the same time.
@tcbrc7555
Жыл бұрын
Hey thanks for the advice but if you happen to check out some of my other vids you’ll see that I’ve done that..lol
@CoolHandLukeZ
Жыл бұрын
@@tcbrc7555 oh nice, sorry I haven't seen any others (yet!). Was just looking at ideas for stretching my Deadbolt and came across your video. I want to stick my Deadbolt body on my Gladiator chassis since I like the look more, and use the Deadbolt chassis for my various harbodies (got the new FJ40 hardbody and have had a Jurassic Park Wrangler toy on that short wheelbase as well).
@tcbrc7555
Жыл бұрын
@@CoolHandLukeZ hey I gotcha buddy..
@LuisChavez-lf1gf
Жыл бұрын
Can you use the high clearance links for the swaps or does it have to be regular links
@anthonymiller8979
Ай бұрын
I'm fairly new to this hobby but my understanding is that a short wheelbase gives me maneuverability/tight turn radius and less chance of high centering or belly rubbing but a long wheelbase gives me a better climber with less chance of flipping backwards?
@cardboardcrawlersrc8805
2 жыл бұрын
How bout them gladiator links 😍I have a set I’ve been thinking about putting on my c10 also building up a chassis so maybe on that.
@tcbrc7555
2 жыл бұрын
Yesssirr but your rear tires would be out past the tailgate..lol
@bassyguitar
Жыл бұрын
try using rear gladiator links and shafts for the front and rear of any scx24 and its killer 😜 thats what i run
@dfghjiko9iuytgf
Жыл бұрын
If you already have metal drive shafts on c10 the rear drive shaft works with rear bolt links. Don't do what I did and buy deadbolt shafts as not needed.
@tcbrc7555
Жыл бұрын
Didn’t realize c10 rear shaft would work so yeah I’ve got a deadbolt rear shaft on both..
@marlowesimpson5562
Жыл бұрын
C.an you send links for the parts please I'm building an scx24 bronco and I'm top heavy as hell
@andrewrichey7374
2 жыл бұрын
Hi say it’s still scale, we just make them our own. And as long as I’m happy with it is all that matters. Now let’s get outdoors and have some fun yeah 👍👍😎
@tcbrc7555
2 жыл бұрын
You know that’s right…lol
@jerrysmith7166
Жыл бұрын
Add some will wait to the front of that thing even with a shorter wheelbase you should probably still make it
@tcbrc7555
Жыл бұрын
All these RC’s have metal portal axles and brass wheel inserts, brass boulder bars.
@kiknlif
Жыл бұрын
Will the red deadbolt front bumper bolt up to the bronco frame? What model and where did you get that bumper? Also where did you get that peace sign american flag sticker on the side of the red deadbolt? Thanks for the help
@tcbrc7555
Жыл бұрын
Got all 3 from Amazon.
@ChordsofPower
Жыл бұрын
[love it. which rear links are longer, C10 or deadbolt?
Hey man! Could you give me some advice on how to replace links to make it longer? I have a deadbolt and as you know, the front links stock are very short. Thanks
@tcbrc7555
Жыл бұрын
Not sure what else to tell you…lol
@ckrxx644
20 күн бұрын
"I stretched his rear" you had to of worded it like that on purpose man 🤣🤣🤣🤣
@user-nt6cd8ym3e
16 күн бұрын
Hahahahha shit had me rollin
@TheDroneNerd
Жыл бұрын
So the longer wheelbase scx24’s need the deadbolt driveshaft for the rear ?
@tcbrc7555
Жыл бұрын
If it has deadbolt rear links yes.
@Mattyteze
Жыл бұрын
When you're attaching rear links to the front, how do you connect the 2 upper links where the y link goes? Do they just bolt to the outside rather than in between?
@tcbrc7555
Жыл бұрын
Yessir that is correct both sides are threaded.
@Mattyteze
Жыл бұрын
@@tcbrc7555 awesome, thank you for this video. I'm currently 3d printing c10 front links for my Deadbolt.
@user-ji8ls9dr9f
6 күн бұрын
The wheels on the C10 are perfect! What are they?
@tcbrc7555
12 сағат бұрын
@@user-ji8ls9dr9f 1.0 SSD
@aceofspades1012
Жыл бұрын
Stretched his rear means something completely different in prison.
@tcbrc7555
Жыл бұрын
Bahaahaa. Good thing I’m not in prison I guess…lol
@unogno
Жыл бұрын
Ok Bud, I subscribed to your channel on this, the 1st of your videos I have seen, within the 1st 2 min. I hafta ask 1 favor, can you start referring to your rc's in the feminine sense? It just sounds weird to hear you keep saying ya stretched out "his" rear end! 🤣 jk, kinda. I got the Gladiator about a month ago and the Power Wagon I just got like 4 days ago. I ordered the stretch links for the wagon but they haven't been delivered yet. My next buy will probably be the C10 and after that Deadbolt. My cart on Amazon is holding about $3000 in rc trucks and upgrades. 🤣 Looking forward to more vids and I will probably join your other channel as well. ✌
@unogno
Жыл бұрын
I also have Traxxas TMax and Redcats Earthquake, Arrma Big Rock, I got 1 for my daughter called Vanguard and a cheap crawler. I am liking the 1/24 scale better the the bigger and faster rc's.
@tcbrc7555
Жыл бұрын
Hey thanks for subscribing. Yeah didn’t realize what I was saying probably cause sexual thoughts don’t enter my mind when messing with the RC’s but hey I can see the humor. I’ve had the FMS Power Wagon for several months now and put the rear stretch on when I first got it. Put it on my course and took about 5 minutes to strip out the driver front portal gear.
Пікірлер: 97