I am so glad this channel exists with so much scx24 content! These videos are very helpful
@2fmrc
3 жыл бұрын
Awesome!!! Definitely let me know if ya need anything! Glad the channel helps out a bit
@bcochener
3 жыл бұрын
For the weights slipping in the rim, I just slipped a small piece of paper on the side of the weight as I slid them into the rim to act as a shim. No glue, and can be pushed out a with a little effort. Love your vids, learned a lot about upgrades. Also, great indoor course you built as well.
@echobeefpv8530
4 жыл бұрын
Wow , you are like the Joshua Bardwell of SCX 24's !! Great video, but Full end is all US, I'm in Canada, . I'm gonna check them out, but most US do not like Canada shipment.
@2fmrc
4 жыл бұрын
EchobeeFPV haha! I wouldn’t mind getting on his level! Really appreciate you watching & commenting. I’d definitely message full send and ask. He’s super cool and would try his best I’m sure.
@bennickerson9581
2 жыл бұрын
if you open the axle housing, add as much grease as you can. it add weight
@EXPIOWA
3 жыл бұрын
Another useful video with good information. I love the red buggy too. Its awesome.
@2fmrc
3 жыл бұрын
Thanks so much!
@benjellesed7716
2 жыл бұрын
thanks for the info this helped out with weight options! Im always looking and hard to tell what fits in what this helped narrow it down some!
@2fmrc
2 жыл бұрын
Glad it helped! It’s a bit dated now but still comes in handy. There are sooo many options out there now it’s hard to keep up lol
@benjellesed7716
2 жыл бұрын
@@2fmrc True that! I have more of an idea of what im looking for than before, so im satisfied lol. Ive only been into the 24th scale since February and there has been soo many new releases on products its overwhelming!
@fullsendrc2537
4 жыл бұрын
Awesome video! You could always put an O ring around the stock weight so it stays in there. Or a rubber band
@2fmrc
4 жыл бұрын
FullSend RC great idea! I just put a dab of glue and been working great.
@JSAsher
4 жыл бұрын
Carpet tape, you can get the thin double faced tape designed to hold area rugs on hardwood or tile floors. Works like a champ and its easy to remove
@TheChillBison
3 жыл бұрын
Have you had this problem? I've got two different sets of aluminum beadlocks, and having problems with the wheel nut not going on all the way, I guess because the aluminum is thicker than the stock plastic rims. Doesn't really make sense to have all these wheels being marketed for the SCX24 if they aren't a direct swap. But I also have a 4mm axle extension kit, but the threaded portion is the same length and that's what needs to be longer for the aluminum wheels.
@andyrichey1192
3 жыл бұрын
That rear axle shaft, I wonder if they make stock length, I don't want wider , but I do liked stronger
@2fmrc
3 жыл бұрын
At the moment they only make +5mm front and rear. I’ll mention it to them. That would be nice to have!
@mentula3784
2 жыл бұрын
I swear these vids only show up as I'm going through these issues. My brass steering knuckles won't fit with my behind the wheel weights without extending the dogbone shafts. I don't want to narrow it again and lose some low c.o.g. weight so brass inserts for the beadlock and new shafts it is. Might as well buy some new wheels, I'll be damned if I'm messing with the stamped steels ones again 🤬 This is a journey we all enjoy, at least at the end of it
@RCOFFROAD
4 жыл бұрын
Awesome video!! Been wondering what route to go to widen my c10s now I know!! Thanks a ton!!!
@daviddepuy9843
3 жыл бұрын
You can wrap some tape around the loose weights too.
@robertculver3089
2 жыл бұрын
Do the full send rc rear axles have longer threads? I'm having issues with my injora rims and hub weights. With the weights on the axel doesn't come all the way through...
@kel5944
3 жыл бұрын
I have the rc4wd stamped wheels coming in the mail. I’ll probably get the full send stamped weights. I understand that the rims themselves would need drilled, but do the millstone hexes fit with that setup? I missed if you said that.
@saltyguerrilla
3 жыл бұрын
I really like arm a lot from your videos. I have a set of RC4WD Racelines that I need some help with. Do you have a way to add weight to them. Are there any brass hex’s that work? The only thing I’ve seen is the Full send wheel weight’s you’ve mentioned but they are a bit loose. Also which set of tires do you like most for the C10? Thanks bud!
@MrsRabbit8
4 жыл бұрын
I really like those Rage wheels, you have a scrambler tire on that one correct? Yeah, the c10, with the smaller wheel wells, better with smaller tires. (Looks like you may need about 2 or 3 mm more on those front links). I keep seeing your hardbody pickup back there, really gotta build one of those. Definitely need to have the same tires on the tests, so many YT channels do tests, comparisons between crawlers and gear, but they totally screw up the "control" factors. Basically making their comparisons worthless. Thank you, you did this video very well, much appreciated! Also thank you for suggesting FullSendRc. I will definitely be getting those rear axles, as my tow truck needs all the strength it can get! Do you have a link that will help you, or should i go to the website independently?
@2fmrc
4 жыл бұрын
Mrs. Rabbit yeah the rage wheels are really cool wheels. Especially for that type rig. That is the scramblers on them. They are a nice big tire but the sidewall is pretty thin so you get a little tire roll with them. My Holmes revolver in that truck has completely balled them up before lol. I don’t have a link that helps me any for the weights. They are just good overall weights and a great company to deal with so I give them the shoutout! Thanks again for watching!
@MrsRabbit8
4 жыл бұрын
@@2fmrc i have some Scramblers, they need stronger foams than they come with, especially with all the metal upgrades. Thanks again!
@damonmuse6567
4 жыл бұрын
So am I understanding correctly, that the Mil stone weights work with the rage wheels? You have the overweights as well on the red build? Thank you kindly in advance for any info. Aloha nui loa from Maui Hawaii
@2fmrc
4 жыл бұрын
Damon Muse yes the mil stone hex wideners and overweights are on that truck. They are one of the only weights that fit inside the rage wheels due to the small inside diameter of them.
@MelbourneExclusive0
3 жыл бұрын
Can I run the MAX mil stone weights and over weight with Treal beadlocks wheels?
@2fmrc
3 жыл бұрын
Not 100% sure on that one. I don’t have any of the treal wheels. I had more wheels than I needed by the time they came out so I haven’t bought any yet. I may have to pick some up just so I know the answer to questions like yours lol. Sorry I can’t help much.
@MelbourneExclusive0
3 жыл бұрын
@@2fmrc someone on a facebook group already confirmed that they do indeed work! Thanks for the help!
@2fmrc
3 жыл бұрын
@@MelbourneExclusive0 awesome!
@BurgerurgerFPV
4 жыл бұрын
Have you heard anything about when the full send rc axils will be back in stock?
@2fmrc
4 жыл бұрын
Sure haven’t. I’m needing another set of the front axles myself!
@skipmiller8309
4 жыл бұрын
I am wondering if you have experimented with Cross RC line of micro stuff. The CR-24 & CR-18 seem like they have a lot of compatible stuff like wheels, tires and shocks?
@2fmrc
4 жыл бұрын
Skip Miller not much. I’d like to get one of each eventually lol. The cr24 shocks are awesome! Love them on my Jeep!
@jaycarva
3 жыл бұрын
Looking at the treal +5mm weighted hub spacers, would these be too much weight with brass knuckles? What about with heavy wheels? Can you have too much weight in that area?
@williamvanstory6782
4 жыл бұрын
New subscriber. Like your video’s. Where is the best place to get wheels and tires? Appreciate your help. I’m new to this 1/24 scale crawler stuff.
@2fmrc
4 жыл бұрын
William Van Story thanks so much for the sub!! Definitely rc4wd is the best in my opinion. Just search rc4wd for 1.0 wheels and tires. They actually just released a new set of 1.0 tires that I have on order! I’ll be comparing them soon!
@GabenB
3 жыл бұрын
Do you know what size drill bit you would need to fit the nut that comes with the milstones?
@teariestpath8264
4 жыл бұрын
I’m wondering if the scrambler tires will only work with the rage wheels? Or can I use them on other wheels?
@2fmrc
4 жыл бұрын
No they will work with any 1.0 wheel. Rc4wd actually just released a new tire in the same size as the scrambler. I ordered mine today so I’ll be doing a video on them when they arrive! They are the mudslinger 1.0
@teariestpath8264
4 жыл бұрын
2FM RC Thank you for the help, my scx24 is arriving tomorrow and I plan on doing quite a few upgrades.
@2fmrc
4 жыл бұрын
@@teariestpath8264 congrats! Let me know how the build goes! They are so much fun to drive and mod
@morris4069
4 жыл бұрын
What’s your source for parts and where can the stock nuts be found?
@2fmrc
4 жыл бұрын
morris4069 I honestly order between amazon and eBay usually. I don’t have a hobby shop anywhere near me so I just try to find wherever I can get stuff the quickest. I can’t remember the part # for the wheel nuts off hand but I think I have the package at home. I’ll check it tomorrow and see if I can get the part # for ya! They are a little hard to find
@jrg4435
3 жыл бұрын
I put it the other side no glue nothing..I think that you are doing it wrong..flat side out.. good videos
@nunocarneiro464
2 жыл бұрын
You don't need glue, just wrap it with tape
@anthonybarto4721
3 жыл бұрын
Do the millstone wideners work with the Rc4wd wheels
@jessemoe8390
3 жыл бұрын
Where did you get the red tube frame body?
@2fmrc
3 жыл бұрын
It actually came off of a toy truck from a loves gas station lol. It’s totally different now but I still love it!
@jessemoe8390
3 жыл бұрын
@@2fmrc that’s what I was afraid of.. haha. One loves gas station around me and they don’t have any. Is there any name on it?
@kensamek7042
3 жыл бұрын
Can you tell me what the inside diameter of the 15g Full Send wheel weight is?
@2fmrc
3 жыл бұрын
I will check with the owner of full send and get the exact measurement for ya! Give me just a few!
@2fmrc
3 жыл бұрын
Are you trying to see if they’ll fit with another part? I may know whether it’ll work or not. I’ve ran them with several other things.
@2fmrc
3 жыл бұрын
It’s .735
@kensamek7042
3 жыл бұрын
@@2fmrc I was wondering if they would work with the MOHERO Brass Heavy Duty Wheel Hex Adaptor 5mm 4pcs for 1: 24 AXIAL SCX24 AXI90081 Upgrades RC Crawler Car on Amazon. Size wise it looks like they will. Would you need another part to extend the length of the "nut"?
@grassfpv1876
3 жыл бұрын
Do the treal wheels fit?
@2fmrc
3 жыл бұрын
The treal wheels work great. They are probably my favorite wheel now. They hadn’t been released when I made this video. The fullsendrc weights for the stamped steel wheels fit in the treal B type wheels. They are just slightly loose so you have to add a dab of silicone or glue to hole them in but they work well.
@randall4411
4 жыл бұрын
Thanks for the info!
@2fmrc
4 жыл бұрын
Anytime!
@joncolonna8656
3 жыл бұрын
A small.dab of silicone clear , and your still able to remove the weights on your wheels .
@lamb-slayer1372
4 жыл бұрын
You had me at modest mouse
@2fmrc
4 жыл бұрын
Lamb-Slayer yessssss!!!!
@LttlAlisCourseVideos
4 жыл бұрын
How did you get the shocks onto the Jeep? We have them, but have not figured out a good way to install.
@2fmrc
4 жыл бұрын
Alissa Jones the cr-24 shocks? I used the stock ball stud on the bottom and just a straight screw for the top. Wish I had a ball stud to fit the top but they have been working great like that so no complaints really.
@LttlAlisCourseVideos
4 жыл бұрын
@@2fmrc Thanks! Did you use a longer screw than the 5mm? We don't have extra screws and I can't seem to find 8mm length anywhere.
@2fmrc
4 жыл бұрын
Alissa Jones sorry I just seen this. I think I did use a longer screw. I’ll pull one out and measure to let ya know the size
@shaunwiegert
3 жыл бұрын
Your costing me a fortune buddy. I gotta stop watching your videos. Its addicting. Im building 3 rigs for me and my 2 daughters. Thanks again for all the great content.
@2fmrc
3 жыл бұрын
Haha! Sorry about that. Hey if you order from fullsendrc.com don’t forget to use the discount code 2fmrc for 15% off your order!
@shaunwiegert
3 жыл бұрын
@2FM RC
@Victoria-yc1ln
3 жыл бұрын
Tried their site and theres no contact info how whats there fb page or contact number?
@2fmrc
3 жыл бұрын
Are you trying to get in touch with full send?
@Victoria-yc1ln
3 жыл бұрын
@@2fmrc yes
@2fmrc
3 жыл бұрын
@@Victoria-yc1ln they started an scx24 group on Facebook called scx24 fullsend or the owner is Koll Kilmade on Facebook. His profile was Fullsendrc but Facebook made him change it. You can try to reach them there.
Пікірлер: 77