Saved me a lot of money, some seadoo mechanic was charging me $700 to do this for me. Luckily I seen how simple it was to do myself so I rung him and canceled. Thank you
@SKLIFEstyle
2 жыл бұрын
Happy to help, especially for those kind of prices 😵. Couple years you'll have saved enough for another ski!😄 Thanks for watching & the feedback. Be sure to Subscribe!**SK**
@IrishKatB1
3 жыл бұрын
We just bought a 5 year old sea doo GTI 130 jet ski that only has 9 hours on it and been sitting in storage- I appreciate this tutorial to help get it ready for the water
@SKLIFEstyle
3 жыл бұрын
Nice find! Yea def. want to change all the fluids, plugs & everything else you can but otherwise should be a great summer for you all, congrats. I write this as I am dropping off my new car to have the hitch put on, getting a late start to the season but it's all good, should be able to have her touch water sometime this week! Thanks for watching, please Subscribe!!**SK**
@Proboscis
4 жыл бұрын
Great tutorial!! Seems pretty straightforward. A winterization video would be amazing one day, but let's enjoy the summer first!
@Erok352
4 жыл бұрын
If you'll pull the filter before you start extracting the oil, more will drain into the crankcase so you'll be able to pull more out at once.
@brandonjames7156
3 жыл бұрын
DO NOT! I repeat DO NOT!! turn the motor over AFTER YOU’VE DRAINED THE OIL! Yes you will get more oil out but your draining all the oil valleys/oil pump/bearings then turning it over is a great way of wearing out up your main/rod bearings because when you start it with oil all of the passages will be dry. Before they start these motors from the factory they prime the oil system which is why the bearings don’t get torn up on initial start up
@joebutts2945
4 жыл бұрын
Thanks Man - I just changed my Oil Filter on my RXT-255 and could not figure out why that small O Ring was still showing! Happy to see as you pointed out, that one does not seat into the cylinder like the large O ring does. Thanks again, very helpful!
@SKLIFEstyle
4 жыл бұрын
Hey Joe... glad I was able to help. Def the kind of thing that will have you feeling like you are going crazy until you know that's how it's supposed to be. **SK**
@paulmiranda782
2 жыл бұрын
Awesome tutorial. I even ordered the same exact Extoil extractor. I went to Harbor Freight and got ones of those but it didn't work. Thanks again for being thorough, I'm sure it's saved us all some moolah 💰
@AndTodaysProjectIs
3 жыл бұрын
Guys, watch the procedure but don't follow the fill directions. Read the owner's manual. You need to warm that motor up...not just 10 seconds. Then you let it sit for 30 seconds and check the oil. Over-filling these skis is well documented for sending out oil alarms. Just fill it till it is half way between the full and low kinks on the dipstick WHEN the ski is warm. NO MORE than 5 mintues on a garden hose but try to stick with 2 to 3 minutes tops so you don't burn out the carbon seal.
@TheWorstItch
Ай бұрын
Yes and yes…the engine must be warm and the ski level.
@bill11758
4 жыл бұрын
Thank You. Very nice detail. Much better than a lot of videos I have seen.
@SKLIFEstyle
4 жыл бұрын
Thanks Bill, means a lot. Please Subscribe! **SK**
@sachinhanda9723
4 жыл бұрын
Good job brow . Just both 2 gti month ago and with your video I saved about 200 per ski to get the oil changed . Thank you a lot . God bless you brother .
@SKLIFEstyle
4 жыл бұрын
Thats awesome. Both the double jetskis and the savings. Glad I could help. I would appreciate if you would Subscribe! Have a great Labor Day weekend. I'm off to hit the water now :-) **SK**
@Vidgomd
4 жыл бұрын
He’s using way too many paper towels this was recorded Pre-2020 for sure
@mikeheineman6755
3 жыл бұрын
Thanks the the video. It really helped me out on my first oil change.
@SKLIFEstyle
3 жыл бұрын
Glad to hear it. Cheers too many more seasons of them! **SK**
@deeblahoud5983
Жыл бұрын
Awesome very helpful thank you
@SKLIFEstyle
Жыл бұрын
Happy to hear it!**SK**
@CanecaProductions
4 жыл бұрын
Thank you bro. About to do my first service on my new doo. 👍
@SKLIFEstyle
4 жыл бұрын
That's awesome, keep racking up those hours and stay safe out there! And thanks for watching, please Subscribe! **SK**
@brucehelmprobst3438
4 жыл бұрын
Thanks, looks easy.
@SKLIFEstyle
4 жыл бұрын
I should be doing the spark plug change video soon. Be sure to subscribe and stay tuned!**SK**
@c.juneau410
4 жыл бұрын
You always have the best videos my man, love them! Keep them coming. I have those 12" Seadoo GTI 130's. I'm having to change the battery's this year. Wish me luck!
@SKLIFEstyle
4 жыл бұрын
Thanks man! I actually need to put new plugs in my ski...I'm sure I'll put that up this spring. Can't wait to get back out! But I gotta snowboard trip to VT this weekend..got to stay busy somehow 😄. **SK**
@c.juneau410
4 жыл бұрын
@@SKLIFEstyle I here that! I am missing Jet Skiing sooooo bad! I'm so ready to go for the summer! How long do you let your battery's last before changing??
@TheWorstItch
Ай бұрын
Great vid BUT need to run ski on a hose to running heat then take out the oil.
@mattdrolet17
11 ай бұрын
Thanks, great vid
@SKLIFEstyle
11 ай бұрын
I appreciate that! Thanks for watching, be sure to Subscribe!
@damiancarreno288
3 жыл бұрын
awesome job very detailed.
@SKLIFEstyle
3 жыл бұрын
Thanks Damian! I have a ton of other ski videos and other content, usually post 1 to 2x/wk. Be sure to Subscribe! **SK**
@badman187ification
4 жыл бұрын
Great vid! Thanks!!!
@SKLIFEstyle
4 жыл бұрын
Really appreciate that. Be sure to SUBSCRIBE! I have tons of ski content & more, plus free giveaways to my subscribers **SK**
@claytonpeterson216
4 жыл бұрын
Very very helpful thanks
@SKLIFEstyle
4 жыл бұрын
Thanks for the feedback Clayton, happy to be able to help. I would appreciate it if you would Subscribe too! **SK**
@TheGlichOut
5 жыл бұрын
Nice thanks for your help
@SKLIFEstyle
5 жыл бұрын
No prob. Glad I could be of some help. Appreciate if you Subscribe. I have a ton of great content on and off the ski. Giveaway coming soon to subscribers too! **SK**
@johndavies7938
4 жыл бұрын
Good job
@davestrauss8919
5 жыл бұрын
Awesome job
@R1Kyle
3 жыл бұрын
Why the F_____ do people feel like they need to pour the new oil into the oil extractor jug to measure the oil.
@nikosgrigorakos
3 жыл бұрын
LOL It's a bit like cooking pork on George Foreman fat free grill and then use the dripping fat to cook fries with your meal
@aaronoutdoors7556
4 жыл бұрын
You da man dawg
@SKLIFEstyle
4 жыл бұрын
Thanks! Please Subscribe!! **SK**
@sonnysaechao650
4 ай бұрын
How many quarts of oil does it take ? I put 3 quarts, and it seemed like it's still low. 🤔
@user-pc7bx9ok5o
10 ай бұрын
how to reset maintence requiered gti130 2017?
@johnnyunconscious4040
5 жыл бұрын
What did you spray around the engine components at the end of the video ? Great video by the way , super informative , straight forward and to the point . Will be subbing and checking out other videos .
@SKLIFEstyle
5 жыл бұрын
I really appreciate that! It was XPS spray...worth..every..penny. And last surprisingly long.**SK**
@jeffreylibby8971
4 жыл бұрын
Stupid question, how come the ski doesnt start when you have the key in with full throttle? Doing my GTIs now and just wondering.
@SKLIFEstyle
4 жыл бұрын
Probably a safety mechanism so you dont launch yourself while offloading or docking and hurt yourself. My best guess, never realized that was the case...but don't think I've tried it either. **SK**
@michaelc2119
4 жыл бұрын
@@SKLIFEstyle Keeping the throttle wide open while starting puts it into "flood mode" which stops the injectors from spraying fuel. If your ski won't start after cranking it too many times, the engine will be too rich (too much gas not enough air) and won't be able to start, aka "flooded". You put it in flood mode, pull the spark plugs and it will clear out. Same thing for compression checks, flood mode prevents gas from spraying out of the spark plug holes while you're checking it. When you're doing this for oil changes, if you are also going to change the spark plugs, I would pull them before doing the oil change in case your hand slips then put the new ones in after. If you're almost out of oil and your engine accidentally fires up that would not be a fun afternoon.
@instagatortv
4 жыл бұрын
i live in CT also lmao and i have the same jetski haha dope
@SKLIFEstyle
4 жыл бұрын
Nice! Got to love the black and green, CT maybe not so much lol. They are running this place into the ground smh. **SK**
@instagatortv
4 жыл бұрын
@@SKLIFEstyle yes i agree with ya hahaha
@billzaner5727
4 жыл бұрын
Great job!
@billywade5702
4 жыл бұрын
Thanks, great detailed video. My ski is 2019 GTI 90. I don’t seem to have oil cap to remove on the header, any suggestions would be great thanks
@SKLIFEstyle
4 жыл бұрын
Thanks Billy. Please Subscribe! I would have to see a pic or video of the engine to be able to say. I haven't worked on one so idk off the top of my head. My guess is they just blended it in when with some other plastics so ypu don't even notice it. But you must have one. I have an FB page. Feel free to message me a pic/vid of the engine bay. Short of that I would just look at the manual, or call the dealer.**SK**
@danielhodgin1360
4 жыл бұрын
What size inverted torx socket is needed to open the oil filter cap?
@SKLIFEstyle
4 жыл бұрын
I actually may do my oil change this weekend funny you ask. You will want to use a 10 Torx. **SK**
@dhhodgin
4 жыл бұрын
@@SKLIFEstyle thanks.
@SKLIFEstyle
4 жыл бұрын
@@dhhodgin No problem. Appreciate if you Subscribe. I will have a few more ski vids out before end of the year. As for 2020 I will be doing some upgrades so there will be even more content coming. May even get a new toy too, but we'll see. **SK**
@ralphfonseca9303
3 жыл бұрын
Hi, what size and type of wrench do you need to remove oil filter ?
@SKLIFEstyle
3 жыл бұрын
5/16" should do the trick. Thanks for watching, please Subscribe!**SK**
@Panda-vs7nx
4 жыл бұрын
How do you get rid of the oil?
@SKLIFEstyle
4 жыл бұрын
I typically just drop it off at a local auto shop. Many mom & pop shops put the used motor oil in shop heaters which can burn all types of oils. But either way they dispose of so much of it it's easy for them to take it. Can check at your local dump if they have a special place to take it...but I find the shop around the corner is much easier. Thanks for watch Panda. Please SUBSCRIBE! **SK**
@samibentroudi6423
3 жыл бұрын
Just bought the new 2p121 SEADOO FISH PRO and really enjoyed your video as I am a hands on kind of guy and learning how to maintain my new rig. One question I did not get the theory about holding the throttle when you try to start the engine. U mean the hand side throttle? U gotta hold it so that the engine won’t start? Have not put it in the water as of yet just personalizing it right now but soon will put it to the test.. thank you . Please advice regarding the throttle action. Cheers. Sami
@SKLIFEstyle
3 жыл бұрын
Congrats on the new Doo, and thanks for watching, please Subscribe! That said, you don't have to do that part with the throttle if you don't want to, there will always be some oil left in the machine regardless. But if you want to get more oil to the bottom to drain, you hold thr start but while holding the hand lever on the right (throttle), just for a few seconds, it kicks over the engine without allowing it to fully start and the oil will drop down to the bottom of the case. If the engine started there wouldn't be a lot of oil in there (from previous pumping) for it to be running (not good) and also what was in there would rise up higher in the motor and still be unable to get caught. But once or twice, basically turning it over, won't hurt.**SK**
@toddbrown7478
5 жыл бұрын
where did you get that o-ring for the bolt. the xps kit only comes with the 2 for the cap but on one for the bolt
@SKLIFEstyle
5 жыл бұрын
Yea my last kit was like that. You have to search for one that shows all 3. Honestly I didnt change out the small oring last time cause the kit before didnt come with it, I'd bet you will be fine...but its pretty basic, I'm sure u could find one at the hardware store.
@toddbrown7478
5 жыл бұрын
@@SKLIFEstyle Thanks
@ballz6211
5 жыл бұрын
Just got my sea doo last summer. We rode it pretty good and it's been sitting all winter. Am I in bad shape for not having it "winterized"?
@SKLIFEstyle
5 жыл бұрын
If it is brand new I think she will survive but I would run all her gas out...run some fresh stuff in her asap...charge up the battery before you go out. And perhaps find something from autoz9ne you can throw in the 4stroke to help clean up the valves and engine to keep the engine clean. And next winter DO winterize her...you want her reliable out on the water and running for a long time. Thanks for watching, please SUBSCRIBE! I have tons of ski videos and more coming soon. **SK**
@c.juneau410
4 жыл бұрын
HOW DID THINGS GO WITH YOUR JET SKI??
@FrankLamb-p2u
2 ай бұрын
Was not too bad, damn ads
@ellyattmahn3770
4 жыл бұрын
Do u know how many hours it is for the first service and I have the same ski just different colour
@SKLIFEstyle
4 жыл бұрын
I believe our models and up state at 40 or 50 hrs. I just do it at the end of the season. But can't hurt to do it more often. I've stuck to once a year though. **SK**
@ellyattmahn3770
4 жыл бұрын
SK LIFEstyle so do i do when it’s says maintenance on the ski display
@SKLIFEstyle
4 жыл бұрын
@@ellyattmahn3770 yea if it comes on than do it...but if you do it like every 40nit shouldn't. Although I've got it one time for some reason after I did my oil change myself it was still saying maintenance so I asked the dealer to wipe out the code.**SK**
@darwinnavas3615
4 жыл бұрын
I have a question
@SKLIFEstyle
4 жыл бұрын
Hey Darwin...what is it? **SK**
@dullnabawi5742
3 жыл бұрын
Hi bud is it gti 90hp ? Cheers
@SKLIFEstyle
3 жыл бұрын
Hey, no mine is a 155 Hp.**SK**
@ericksukendy9829
5 жыл бұрын
How many hours you change the first oil? & afterwards every how many hours?
@SKLIFEstyle
5 жыл бұрын
They say 50, I think now its after 100 hrs. Honestly you don't hurt anything by doing oil changes, I do mind at the end of every season...first was at 46 hrs...second around 76 hrs.
@johnnykost
3 жыл бұрын
What do you spray with the XPS lubricant?
@SKLIFEstyle
3 жыл бұрын
Everything on the inside..hoses, clamps, plastics, entire engine block.**SK**
@ericksukendy9829
5 жыл бұрын
Do you need to use computer to reset it after being oil changed? I wonder if any computer ever involve after purchasing it
@SKLIFEstyle
5 жыл бұрын
Yea I asked the dealer to reset it when I took it to be winterized a few weeks back. Otherwise I think you need to get a cpu specialized for the Doo to get rid of the code. I went all summer with it saying Maintenance Needed...it just shows up once when starting and then gors away.
@ericksukendy9829
5 жыл бұрын
My place is very far from the dealer. I was thinking of changing the oil myself & ignore the computerized thingy. You think that is fine?
@SKLIFEstyle
5 жыл бұрын
Yea I did that all summer. Not a problem. Other people may think something is wrong if they are on it but you just let them know the cpu has to be reset. But far as the machine is concerned you're fine.
@ericksukendy9829
5 жыл бұрын
Any ways you can reset th cpu by yourself?
@SKLIFEstyle
5 жыл бұрын
@@ericksukendy9829 yes but you need a special computer to do it with, which costs a couple hundred bucks...just simply isnt worth it in my book. Im sure the computer can give u other read outs and stuff...but u less you have a ton of machines, and do a ton of work on them, it probably isnt worth it. But thats they only way I know of. Nothing like a car were you can do it just with the key to the vehicle. Unfortunately.
@leea.6101
3 жыл бұрын
Start and stop process after pulling oil out again and again will destroy your engine. You actually poured fresh oil into the same container that held your dirty oil? Huh??
@Jade8740
5 жыл бұрын
What pump is that? Looking for one for my seadoo
@SKLIFEstyle
5 жыл бұрын
Thanks for the Sub!! That is a Extoil 6 Liter Oil Extractor with a gauge. Meant to do a review end of last season. Perhaps I'll do it soon for the new season.
@Jade8740
5 жыл бұрын
@@SKLIFEstyle I ordered it lol. I was trying to use the regular old pump ball syphon with rubber hoses on each end but it wasnt working so I think this pump will do the trick
@SKLIFEstyle
5 жыл бұрын
@@Jade8740 nice, I think you will find this to make the process much easier lol
@Jade8740
5 жыл бұрын
@@SKLIFEstyle when you flush it you have to start it first then turn water on or turn water on then start it?
@gotjellocjrb
5 жыл бұрын
@@Jade8740 I start before running water... so you don't flood the engine.
@stevehoronzy6919
3 жыл бұрын
I use puppy pads
@SKLIFEstyle
3 жыл бұрын
That's a pretty good idea. Probably pretty cheap, I'm sure makes much less mess and easy to clean up. First time I heard of that.**SK**
@manueljaramillo4813
5 жыл бұрын
Where did u buy pump
@SKLIFEstyle
5 жыл бұрын
Amazon. Believe the kit was like $60. **SK**
@manueljaramillo4813
5 жыл бұрын
Thank u ur videos are really informative I just bought a 2019 and I love it is awesome keep making good videos
@SKLIFEstyle
5 жыл бұрын
@@manueljaramillo4813 that means a lot. Will do! Appreciate if you Sub if you haven't already. Just hit 1K...time to start on 2K! **SK**
@user-xt8mr1cx8u
10 ай бұрын
Not good
@steinarlarsen9899
5 ай бұрын
Some bullshit here like starting engine several times to check engine oil level...it tskes 3 liter, period
Пікірлер: 113