Had one from new out of the London boat show year's ago! Loved every minute of it. Used on the see off of the Isle of Wight out of Bembridge harbour. Travelled across the Solent to the main land many times. Hope you have as much fun as I did 🙏 Forget to say 360 spins were my speciality 😊
@restoroosterohv
2 ай бұрын
We are absolutely enjoying it although it has some starting and acceleration off of idle issues. Time to go through the carbs.
@bazzer621
2 ай бұрын
@restoroosterohv I ended up working at the Isle of Wight Seadoo dealer for 6 years and yes, carburettors were always a bit of a problem, especially as they were used in the sea. Good luck for the future 🙏
@restoroosterohv
2 ай бұрын
@bazzer621 thank you
@BladeKnierim
4 ай бұрын
Great video Resto!! Been running through all of your videos, whether it’s relatable to what I’m working on or not I’m watching them all! Actually have 2 of these similar boats both broke down, trying to piece 2 into 1.
@restoroosterohv
4 ай бұрын
Thank you, I appreciate your feedback and support. Good luck with your projects!
@stevesanderson8360
13 күн бұрын
Yes there is a screw on the shifter assembly where you can adjust the tension on the shift levers. Another thing you can try if you're not happy with how the seats turned out, sem vinyl coat. it's actually a vinyl upholstery paint in a can. You won't believe how good the seats will look and how durable it is. I've used it many times over the years. Make sure you use their vinyl prep
@restoroosterohv
13 күн бұрын
Do they sell it on Amazon and if so, can you post a link?
@cbadnc9040
4 ай бұрын
Super interesting! Thanks for showing us something different! Always a pleasure watching your videos!
@restoroosterohv
4 ай бұрын
Thank you. Always a pleasure reading your comments.
@mrbiwel6273
4 ай бұрын
The bottle part is so funny :) 53min have fun this summer !
@restoroosterohv
4 ай бұрын
Haha thanks. It was sort of frustrating at the time.
@stevesanderson8360
13 күн бұрын
If you don't have a press for the wear rings, put them in the freezer for 30 minutes they will usually slide right in
@restoroosterohv
13 күн бұрын
It helps but not always an easy drop in as in this case. If you reference the video at approximately 38:40 I make mention of pulling them out of the freezer to install. Thank you for watching in for your comment.
@MrJmattr3
4 ай бұрын
Great job on that machine. Been thinking of adding something like this to my collection. Did not know about the wear sleeves in the propulsion unit! Thanks
@restoroosterohv
4 ай бұрын
Very common in these boats but super easy to do yourself. Thank you
@user-uz2yn4is8u
2 ай бұрын
Nice man.
@restoroosterohv
2 ай бұрын
Thank you
@trixter192
4 ай бұрын
Good job fixing that up. Looks like a lot of fun!
@restoroosterohv
4 ай бұрын
Thank you. I think it will be
@Batman45025
4 ай бұрын
Im more of a dirtbike guy but that was a fun watch for something different, thanks for sharing!
@restoroosterohv
4 ай бұрын
Yeah, me too. Thanks for watching.
@dougw585
3 ай бұрын
The Master of knowledge!
@restoroosterohv
3 ай бұрын
I don’t know about that, especially with boats but thank you.
@joelatkinson2080
4 ай бұрын
Great video!!! Looks like lots of fun.
@restoroosterohv
4 ай бұрын
Thank you. It will be.
@ToddleyProductions
4 ай бұрын
The 717 is the best non rave valve motor seado ever made. They are nearly indestructible!
@restoroosterohv
4 ай бұрын
That’s good news. This boat already has one new engine, so something must’ve happened but I hope it lasts a long time for me or at least this summer
@ToddleyProductions
4 ай бұрын
@@restoroosterohv just make sure you change out the oil lines. Usually it’s the lines that break not the oil pump itself. And also for future reference check out Osd marine. They have tons of parts
@restoroosterohv
4 ай бұрын
@ToddleyProductions thanks, good tip
@SmittyAccess
4 ай бұрын
It’s funny you posted this. I was looking at the same boat a week ago, it was in great condition. The guy who had only took it out 2 times, he said it was to rough on the water and he preferred his pontoon boat. He was selling it for $1500. Wish I would have bought it now
@restoroosterohv
4 ай бұрын
Wow, that would have been a great price.
@lopermachine
4 ай бұрын
Looks great, shocking what a little hard work can accomplish.
@restoroosterohv
4 ай бұрын
Thank you
@Rick-4552
4 ай бұрын
Interesting video I learned a few things 👍🏻
@restoroosterohv
4 ай бұрын
Thank you
@benschlack5814
4 ай бұрын
I can hear the excitement in your voice 😂 but seriously great video bro!
@restoroosterohv
4 ай бұрын
Haha thank you.
@larrywarner9314
4 ай бұрын
Try CLR you can buy it anywhere it works good
@restoroosterohv
4 ай бұрын
I have some under the sink but haven’t yet had a chance to try it. I feel pretty confident it will work.
Пікірлер: 40