O, I wish you sold these displays and I wish I was wealthy enough to afford them if you did. I could look at them for hours and hours. Keep it up.
@Deebz270
6 жыл бұрын
Excellent. Looks so realistic too. Well done.
@sierravalleyandharborjunction
2 жыл бұрын
absolutely fabulous dave! I'm going to try on my harbor scene!!
@puppylove8945
7 жыл бұрын
You are a inspiration to me, and such a talented spirit. I made a diorama for my Christmas village, now I am going to attempt to paint it. I have a train bridge over water, I am going to try and follow your video as I paint my project. Thank you so much could not do this with out you!
@ruatrainman2
8 жыл бұрын
Hi Dave, I'm glad you made a youtube channel , this is the video I was talking about on Facebook. This is the most realistic looking water scene I've seen ,and will try your technique on my Milwaukee Road layout hear in the near future. Thank you very much for uploading this video. Dave.
@TSemasFl
3 жыл бұрын
Very nice, thanks for sharing your tricks up your sleave.
@duwelrp
2 жыл бұрын
Awesome. Gonna try it.
@dangoss7180
2 жыл бұрын
It had become an automatic to use oil based varnish or two part epoxy for model railroad water. Then came this idea. Good old Hodge Podge does a lot of the same, cheaper without, the fumes. The water based Revolution that Dave was very much a part of. Ahead of his time.
@puspadevi3331
6 жыл бұрын
excellent done by dave thanks for giving me such brilliant idea😍😍😍😍😍😍😘😗😘😘😘😍😍👏👏👏👏👌👌👌👍👍👍✌✌💐💐💐💐
@harveysimon4288
4 жыл бұрын
Thank you, much appreciated.
@frankortmann7960
6 жыл бұрын
Great job, i will try it for my little sea port !,.......thank you for the inspiration !
@michaelchartres
6 жыл бұрын
That is beautiful. Many thanks for sharing.
@MikeThomasRailRoadOverhaul
6 жыл бұрын
Damn brother you are truly talented
@ld1636
6 жыл бұрын
All it takes is straight modge podge? How frustrating to have bought all those other water specific products. However, now I know. This looks fantastic.
@joshjohnston7388
6 жыл бұрын
Right? Oh well, I'd rather use the ole tried and true and write it off, honestly. This is great. The varnish is brilliant.
@robertrodriguez6978
4 жыл бұрын
Hello Dave! I have about four years admiring your work as The Trackside Modeller and be updated with your videos! Your Model Railroad Scenery, which I have, is a indespensible guide for my modest model railroading projects! Since I am a rookie in the hobby, but very interested to learn, I would pleasantly welcome an advice from You in modelling small town with a "port", like the one you do have! But my question really is how did you shape the wooden dowels, in order to look so realistic in your seaport water video and also what kind of materials You used for the docks and retaining walls? Looking forward for Your Resoonse! Robert--
@thetracksidemodeler8573
4 жыл бұрын
Robert, The pilings are made from wood dowels from the hardware store. I rough the surface with a wood rasp drawing it the length of the dowel. Then I paint the dowel with cheap craft store acrylics and cut the individual pilings to length. On some project the piling became part of a "master" from which a rubber mold is made and resin castings are made.
@robertrodriguez6978
4 жыл бұрын
@@thetracksidemodeler8573 Thank You Dave! Appreciate so much your reply to my inquiry! I will be watching your channel with even more interest from now on! Keep sharing with us your vast expertise in the hobby!
@satvikrawat2954
6 жыл бұрын
Great
@kimber45ish
6 жыл бұрын
Thank you!
@silkcustoms520
4 жыл бұрын
Dave, Your the Man. Looks Incredible. I am getting back into my layout after years of raising 3 Sons. Just curious why you didn’t use resin and what are your thoughts on using Resin for Water instead of 10 coats of mod-podge. Huge Fan !! Thank You.
@thetracksidemodeler8573
4 жыл бұрын
I selected Mod Podge as an alternative to epoxy. Epoxy resins are very fussy to use and sometimes the water isn't what you expected. You also need 24 hours of 80 degrees for the epoxy to cure correctly. Mod Podge is a water based acrylic, no mess, and no fuss. Just brush it on and let it dry. It's also about a 10th of the cost of epoxy.
@harveysimon4288
4 жыл бұрын
Wonderful work. One question-what’s the approximate total depth of 10 coats of Mod -Podge? I’m building a float and need to account for this in order for the float to look like it’s really floating.
@thetracksidemodeler8573
4 жыл бұрын
10 coats about 3/16" to 1/4" thick depending whether you pile it up or not...
@robertrodriguez6978
4 жыл бұрын
Hi Dave this Robert again! Hoping to hear from You about my last week request related to weathering built-up structures! And if I can send You a picture of the ones I want to weather! Take Care! Robert
@neilcraig5762
2 жыл бұрын
I really like this method but I have to ask how you get the rippled effect. I have applied only two coats so far but don't see any ripples even though I am using the brush to create what I think are little ripples. It seems to dry flat without any ripple texture. Possibly that will come with successive coats but maybe there is something I'm missing.
@thetracksidemodeler8573
4 жыл бұрын
I've tried several of the track planning software packages and hated them all. I find it easier to lay out a track plan full size on large sheets of paper. I've never built a subway - why build a layout that you can't see?
@robertrodriguez6978
4 жыл бұрын
Hello Dave! A couple of weeks ago I posted a comment about track planning software and to find out if You have ever built a "subway station" diorama or maybe a subway layout! When You have a chance, would You post some comment about it?
@franklvetter9326
6 ай бұрын
Where can I find the acrylic furniture varnish or a good brand name. Ty
@todddavidson9066
5 жыл бұрын
Which acrylic furniture varnish did you use? Thanks!
@thetracksidemodeler8573
5 жыл бұрын
I used Gloss Acrylic Furniture Vanish. It look like milk when you apply it but dries clear.
@amun1999
5 жыл бұрын
What happened to your Pennsylvania Railroad layout HO scale?
@gmaneis
5 жыл бұрын
Dave, you don't reply very often, but I'll give it a shot. What can be used if I can't find Gatorboard?
@thetracksidemodeler8573
5 жыл бұрын
Any hardboard like Masonite, plywood, MDF, anything but Styrofoam!
@gmaneis
5 жыл бұрын
Thank you! I bought Masonite for my little ocean inlet project. Will follow your techniques as best I can, but few among us are gurus of model railroading like you. Your work is stunning. If mine looks a 10th as good, I'll be elated.
@thetracksidemodeler8573
5 жыл бұрын
I bought mine from a plastics dealer that sell outdoor sign materials. A 4' by 8' sheet, ½" thick was $92.00 USD.
@dudeguy3731
Жыл бұрын
hi, you mentioned that styrofoam does not play with mod podge well, can I use cardboard instead?
@shellylynn3063
4 жыл бұрын
Where can I buy the board?
@thetracksidemodeler8573
4 жыл бұрын
Gator board can be purchased at any sign maker or businesses that sell plastic sign-making materials. Small pieces can be bought on-line but I don't have the link.
Пікірлер: 44