Anyway you could list all of the products you purchased for this project?
@jasonfromda6ix
3 ай бұрын
Excellent job man
@MohawkDaveOffRoad
3 ай бұрын
Thanks for watching.
@cbeserra
3 жыл бұрын
Awesome!! Nice work!
@JP-mh9jv
5 жыл бұрын
2 year later check-in. Anything different you would have done? I imagine you would prefer to have the controls on the left-hand side?
@mikespoke5161
4 жыл бұрын
Since you had the cover off, maybe you should have used nuts and bolts to hold the speaker in with a little loctite.
@ZGP
Жыл бұрын
Did you have to cut away any foam?
@stukovalex
6 жыл бұрын
Was this a kit? If so can u please drop a link for what u bought
@sparki176
7 ай бұрын
Why didn’t you just buy the originals seafood speaker?🙃
@metung4
6 жыл бұрын
KICKER 41KM652C KM SERIES 6.5" 2-WAY 195W MAX MARINE COAXIAL SPEAKERS 6-1/2" these are the speakers im thinking about getting, are they similar to the ones you used?
@eostrow1963
4 жыл бұрын
metung4 You will get better/ more watts.
@edwinawaldron
3 жыл бұрын
Where did you get your wrap for your spark?
@MohawkDaveOffRoad
3 жыл бұрын
Dealer.
@jamesbergan3628
5 жыл бұрын
This video is terrible
@swedishkev
2 жыл бұрын
No talk about ,if you played music ,stationary, with engine off, surely battery would be so down would not start jetski after 20 mins ?? would it have been more peace of mind with another battery added,they are so cheap to buy. ???
@MohawkDaveOffRoad
2 жыл бұрын
I have not had that happen. I’ve had music on for almost an hour and started just fine.
@imrankhan-ox3de
6 жыл бұрын
Where did you get you're decals for the ski and how much were they
@eostrow1963
4 жыл бұрын
You should have gotten the 2 ohm more watts that way. That’s what the system calls for.
@sammychandna7228
6 жыл бұрын
Great video, very helpful write-up! Couple questions 1. The silicone - was that just to create a seal, or was it more to glue it in place? My thoughts were, gorilla glue or epoxy, or using nuts on the other side. Advise? 2. What size hole-saw did you use? I’m pretty terrified of that part myself, and I have 2 Sparks, wanted to do this to both 3. Why the power switch? Would it draw too much power if it was connected to the battery and basically on the entire time the jet ski was powered on? 4. Love the blacked out top piece you have (the cover on the very top), I originally plasti-dipped mine, then used a vinyl wrap. Neither have held up well, what did you use? It looks really good Thanks again for making this video, very helpful
@MohawkDaveOffRoad
6 жыл бұрын
Sammy Chandna hey I'm glad you like the video. To answer your question 1. Silicone is to seal and glue in place. I wouldn't use epoxy in case you want to replace a speaker. And some epoxies may melt the plastic. 2. The holesaw size I don't remember, but it's listed on the box of speakers when you buy it. Measure 6 times and go SLOW. 3. The power switch is just a precaution in case it shorts out or something happens and also no amp draw when off. And 4. it is vinyl wrap. And I have the same issue with my helmet taking chunks out of it. I redo it every season. Hope that helps. Check out my Instagram @MOHAWKDAVE555.
@jeanrichard3933
4 жыл бұрын
Hey dave just curious hows the sound going wide open like 50mph? Can you still hear it enough or just barely?
@MohawkDaveOffRoad
4 жыл бұрын
I wear a full face helmet and I can still hear it decent..
@SargeISF
6 жыл бұрын
Where did you get that switch from? Nice install man.
@MohawkDaveOffRoad
6 жыл бұрын
Point Break Sliders the switch is from ebay. It's called a a water proof led switch.
@Apocalyshit69
4 жыл бұрын
When installing back the top deck some reason it is not sitting right? Any idea? I made room for the speakers by removing some foam, I also have the amp under the storage unit
@joeygreen7302
6 жыл бұрын
Hi can you please link me for the led switch with the play and pause button.., also the amp? Speakers etc thanks!
@nbk456
6 жыл бұрын
Cool video man, this off season i plan on customizing my sea doo, and wanted your opinion, i plan on putting a sound system and also wrapping the sea doo, which one would you recommend to do first wrapping it or doing the sound system? Thanks for your time
@SickTurbo23
6 жыл бұрын
Is it safe to drill holes in the jet ski?
@MohawkDaveOffRoad
6 жыл бұрын
Juan Alvarado yes as long as you are not floating in the water as you are drilling. Lol. Two seasons in, still floats and works.
@ramos42388
6 жыл бұрын
Just buy ultimate ear roll 2 hooked them up to Bluetooth to your phone they are waterproof an they bump.
@interiorrenovationgroup82
Жыл бұрын
You did great bro
@tonyd9233
2 жыл бұрын
How often do you gotta charge the battery? How many hours does it last with the jetski battery ?
@The1Collin
2 жыл бұрын
🤦🏻♂️
@terriegarcia8179
3 жыл бұрын
Kick ass
@jerrywilliams9589
7 жыл бұрын
Sweet man! Geneva eh! I live on geneva let me know when your back this way! Did you order the kicker system in a kit or each piece seperate?
@MohawkDaveOffRoad
7 жыл бұрын
Hi. I bought it all separate. Will be hitting up lake geneva and lake michigan next season.
@jonfyfazan
4 жыл бұрын
👏👍👌🇳🇴
@sammychandna7228
6 жыл бұрын
Hey Mohawk Dave, one more question - the Bluetooth controller you mounted to the top panel, how did you do that? Dremel? That part seems a bit more frightening than the speakers.
@johncoppage3253
6 жыл бұрын
You never actually went through where each wire gets connected.
@johncoppage3253
6 жыл бұрын
Did you just wire the 12v ignition with the 12v constant? It's unclear what you did there.
@treyperry9722
4 жыл бұрын
I'm looking at doing a similar install on my GTX. Any tips?
@MohawkDaveOffRoad
4 жыл бұрын
Make sure all your wire connections are strong. Solder everything.
@Lumilan
7 жыл бұрын
Great vid!
@moustafaharajli5370
6 жыл бұрын
How many watts is your amp? And how many watts does each speaker pull? I just bought a kawasaki ultra 310x and I really want to install audio!
@MohawkDaveOffRoad
6 жыл бұрын
Moustafa Harajli amp is 50w. And speakers are 65w at 2ohm
@moustafaharajli5370
6 жыл бұрын
Mohawk Dave wow that's loud for 50w, I was hesitating to spend 540 for 300w kicker amp and two 135w speakers. After seeing your video I'm gonna purchase it 100% because even your system is just wow.
@MohawkDaveOffRoad
6 жыл бұрын
Moustafa Harajli you gotta keep in mind, I went with the amp that's designed for a small battery and charging system like atv, or a motorcycle. Make sure that a 300w amp will be able to get sufficient power from your battery and charging system. I can have this playing music all day while riding at max volume. And the battery will not die.
@moustafaharajli5370
6 жыл бұрын
Mohawk Dave good point I'll speak with the dealer thank you
@ramos42388
6 жыл бұрын
Buy the ultimate ear roll 2 hooking to your life vest or the handle bars. They are loud.
@LuisMartinez-wy6bm
6 жыл бұрын
Does the silicone works
@MohawkDaveOffRoad
6 жыл бұрын
Luis Martinez it absolutely does
@metung4
6 жыл бұрын
how water proof is it?
@MohawkDaveOffRoad
6 жыл бұрын
So far so good held up the entire season with very aggressive riding, and lots of upside down in the water time. At one point my teather didn't pull out while it was upside down and the hull took on a lot of water so I know the amp was submerged, but still works and still sounds great.
Пікірлер: 53