My welds look like mixed change, nickles, dimes, and quarters.
@sleve_mcdichael_
4 жыл бұрын
Clayton Blanchard mine look like the wads of pocket lint mixed in with the change. Lol
@laundrysauce234
4 жыл бұрын
Fake Name when the reply is better than the original comment
@laundrysauce234
4 жыл бұрын
My welds are always nice and clean. After the grinder ofc
@general5104
3 жыл бұрын
Here's an exercise that will help you correct your pattern. Get 2 paint stirring sticks and clamp them onto a piece of angle-iron; running parallel log-ways...about 3/8" from the web angle. Do it on the other leg of the angle, too. This will give you a "path" you have to stay inside of, for stick. You'll have to make the trough wider for MIG, to allow room for your nozzle. Do whatever pattern you feel comfortable with, INSIDE the confines of THAT wooden trough. Do it at least a dozen times dry runs, (no heat), then you'll be able to do one run, actually welding. Pay real attention to the way the wood FEELS to your wrist and commit it to memory. You'll be able to use the paint stick once, on each edge, before the edge is too fried to do its job. This will greatly increase the pettiness of your bead. You can also draw straight BORDER PATH lines with a ruler and White-Out correction fluid. It will glow while you're welding on it. (Its also really good for cutting metal with a torch or plasma. It glows white where you can see it thru your shield lense!) I stopped using SoapStone, years ago, when I tried the white out correction pen, to see if it would work. I've showed hundreds of iron workers and craftsmen that marker! I'd say it is used more as a metal marker, than it is for office work!
@pstewart5443
3 жыл бұрын
At least it doesn't take ten welds to make a dollar.
@horshak1
4 жыл бұрын
mancub if any of my welds came out like yours I carry it around to show off to my friends. Nice work.
@Whipple1
4 жыл бұрын
They look good. Test them. I’d be interested in seeing how much the penetration differed between them. Cheers! Whipple
@xPentag0n
4 жыл бұрын
Definitely intetesting! Good to see trade of in looks to penetration :D
@Welddotcom
4 жыл бұрын
In 1/8" plate they should all penetrate.
@ifell3
4 жыл бұрын
Yeah this would be good, a little etching too.
@Whipple1
4 жыл бұрын
Weld.com Ah, didn’t catch that they were 1/8”. Thought they were 1/4”. My mistake. Just for that I’ll sweep the shop floor twice. LOL Cheers! Whipple
@Welddotcom
4 жыл бұрын
@@Whipple1 We'll run them on 1/4" in the future and do some testing
@akio2589
2 жыл бұрын
Different types and thicknesses of metal make a difference. I find that the cursive "e" makes for nice, consistent welds on thicker stock, but the "stitch" works better for thin stuff, and helps keep from burning holes in things.
@tip3593
2 жыл бұрын
Agreed. He didn’t do anything wrong with the motion but if he raised his heat a bit, that stitch weld would’ve come out a lot better looking
@VypaGaming
11 ай бұрын
Wait so on thick beams and other structural steel can I use the cursive e technique and get enough penetration?
@akio2589
11 ай бұрын
@@VypaGaming I mean, yeah, if you have the heat to back it. In fact, if it's thick enough and the bevel is deep enough, that's about the only way you're gonna get good root penetration on both pieces of metal.
@LibertyDankmeme
4 жыл бұрын
tell us the story of how you got the nickname "man cub" .... and where is bob at ? we need to know these things
@Copenhagen-rk4lq
4 жыл бұрын
Dude, I miss bob. Hope hes doing good❤
@Ron-ds2ob
4 жыл бұрын
When welding on a project, I can lay down a nice looking bead, and then the next one looks like a chicken walked by with diarrhea. I just don't have the consistency that you have.
@garybower1824
4 жыл бұрын
I hear ya. That's why I buy grinding wheels in the 10 pack.
@janeblogs324
4 жыл бұрын
Put your mask 12" away from the weld, elbows on your hips, find a way to not sway your hips (lean or sit)
@aerialrescuesolutions3277
3 жыл бұрын
You can do this Ron. More practice is always good. I'm going early tomorrow to practice while it's still free. (school) Jim Tree
@powrguy1696
3 жыл бұрын
Yeah, all my welds result in "cursive".......LOL
@MaxPower-ke5rq
3 жыл бұрын
Be patient and try to evaluate where you veried
@everlastgenerator
4 жыл бұрын
Awesome work Mancub. I have to say, "the mancub" is looking mighty nice.
@jasonbecker3362
4 жыл бұрын
Hey ManCub, I need change for a dollar, let me get 10 of them dimes 🤘🔥
@mancubwelder7924
4 жыл бұрын
Never heard that one before. I like it👍
@JSTKSK
Ай бұрын
If you want "dimes" learn to TIG or stick weld 6010/11 properly. No point in doing it with mig except for going slower and using more filler at best, and actually making your weld weaker at worst.
@TheCntryson47
4 жыл бұрын
I always like the smoothness of a straight push weld with mig.
@shannonjoseph8045
2 жыл бұрын
Ditto
@bolezy9070
2 жыл бұрын
I'm an aluminum welder. I use the standard stitch type weld. I have to say, I really like your weld. I like the functionality of the draw and the overall look of the weld. Very nice sir. 👍
@keelandavis
3 жыл бұрын
I used to always draw these patterns on my homework when I was a kid before I even knew what welding was.
@StreetBikeTakeoverYT
4 жыл бұрын
If I had to pick, aesthetically the triangle one looks the best but pretty large HAZ. Cursive E’s and oscillating back and forth are my go 2’s.
@greatwhitesfishingadventur2273
4 жыл бұрын
Nice little exercise !! Will give them a crack !! Stay SAFE Cheers from "Down Under" ..
@Welddotcom
4 жыл бұрын
You too brother
@ronmccall6511
4 жыл бұрын
This is one of the best demos of welding techniques. Definitely gonna save this one. Thank you!!
@richardallan455
4 жыл бұрын
My biggest problem with anything other than a straight push is you would not make any money doing those fancy patterns where I work because you are taking much much longer.We all do heavy Fab work in thick steels using flux cored wire and occasionally bare mig wire but honestly you would get left behind and overtaken by our guys,not criticising just see greater value in training the work force to place the wire smack in at 45 degrees and no pretty dancing up the walls its totally unnecessary,the root is where you need to focus the wire.
@ChevyConQueso
6 ай бұрын
Little late, but this is for anyone reading. The place it matters is where the customer expects it to be visually appealing, and not all welders are going to be working in a straight up production environment like yours. Everyone paying for welding on automotive projects loves to see a pretty weld, despite it not adding anything to it, or being desirable on structural work. The customer will get what he wants to pay for, as long as it doesn't compromise safety, for me at least.
@davidpatterson5728
2 жыл бұрын
All I can say is DAMN! If I could do anything even close to the cursive e I would be happy. I have a Hobart 210 , 110/220 gas welder. I have played with it a little but now I have to do something that really counts. I am going to attempt to weld on a thumb to a mini excavator. I would give my left N*T to have something like that. THANK YOU for the awesome video. I have looked at a ton of places for this demonstration!!!.
@bobmoffatt4133
4 жыл бұрын
Nice tutorial ManCub but what, no lazy "J"? What the mig?
@Solaniin
3 жыл бұрын
Why call it "lazy"? I'm curious
@bobmoffatt4133
3 жыл бұрын
@@Solaniin Because the orientation is horizontal by direction of travel
@TheyCallMeNomad
2 жыл бұрын
The triangle is my favorite personally, followed directly by the cursive E. Really mainly depends on working room, it’s easier to get the cursive E in a tight spot
@russianotter
2 жыл бұрын
Good display of techniques, it's useful to have a few practiced for different situations. You'll notice the heat affected zone is drastically different between the different techniques you used. This looks like fairly thin stock, so what's most likely happening is simply overheating. The styles with longer backstrokes tend to generate more heat than a simple drag, and it can warp thin material. For thick stock, I think these techniques would really shine. On the other hand, you'll notice the less backstepping you do, or the quicker you are with it, you can control that HAZ. The quick back/forth stitch towards the end of the video has a very narrow colorband, which is awesome. It's well defined too, which means it's consistent, and that avoids warpage as well. Cool video!
@bassist21685
2 жыл бұрын
I’d love to see you bansaw those welded coupons in half, and compare the fusions at the root. I like to do the cursive e, the stitch or the push. It depends how much heat I need to distribute. A lot of my mig welding is spot, because I’m a body man and do a lot of sheet metal. I really want to practice tig welding more though too for the pretty stuff. But I get alot of sugaring on the backside when I do thinner stuff like stainless.
@jhno68
2 жыл бұрын
make a box that you can pump argon into for the backside, it'll clean up that sugaring more. there are other thing too but i dont remember them off hand.
@jeremyr7147
2 жыл бұрын
SOLAR FLUX works great!! I got a sample bag on ebay for $20. Just a little bit coated on the back side will do ya.. most people I saw using it used waay too much and it leaves build up. Mix it thin that's all you need. No sugaring inside, smooth. I use it on stainless exhaust builds, mig 309L no helium, I use 75/25 because it's not critical and they turn out fine, still no rust. I just finished a resto yesterday. Unibody, rocker panel, 1+ foot of pinch weld gone, and half the dogleg - both sides. All made up from sheet, complex panels with multiple pieces welded together to make it look formed.. its challenging but I'm getting good this is like my 5th job doing a lot of sheet metal.
@mr.know_it_all
2 жыл бұрын
Sugaring is from too much heat. Try turning your heat down and use thinner filler (.035)
@shawnrinkel8377
4 жыл бұрын
Love the mancub. It looks to get the root deep. I’d love to see a bend test and etch.
@sfr2929
4 жыл бұрын
Ive been using a very similar technique to your last one for 15 years except i pull it rather than push and it comes out even more clean than that. Also i use that technique to make a small welder act a bit stronger by pre-heating the area and doing a whip finish over the top if that makes sense. Good job.
@ddrake4747
2 жыл бұрын
I would call your technique a "Stretched Cursive" - "B variation". lol . The "A variation" would be the elongation of the entire circle, like a race track shape.
@traviswright8222
2 жыл бұрын
I usually do the “wave” or “crescent moon” technique, but the “triangle” and the cursive “e” looks really great. Have to push outside my comfort zone and try out some different styles. Great welds, keep up the great work Cub!
@markjacobs4296
4 жыл бұрын
Isn't it Dimes when TIG welding and Nickels for MIG welding ?
@timsexton162
4 жыл бұрын
Wow Man Cub! Mighty good welds there! Hopefully I will be able to make welds that straight and pretty with enough practice Thank you for all of your efforts
@WTFisAuserFRCKINname
4 жыл бұрын
But my favorite is doing V’s up and down, letting it wet into the toes. I just like smoother finishes.
@bryamrico
Жыл бұрын
My welding instructor really threw me off in class. My dimes looked like your cursive E and mancub but he told that my dimes were too big and to make them smaller. I personally thought it looked very good,considering I've never welded in my life.
@mattmaras2746
Жыл бұрын
Cub tooth is my personal favorite, but it looks/works better pushing the puddle imo. If I have to drag the puddle then its the cursive e
@hunterbond1902
2 жыл бұрын
I personally make a “)” type of arch and keep my wire pointed directly at the edge of the puddle on every swoop. Turns out really nice, not quite stacking dimes but it’s still just as pretty in the end!
@dean-gm1lg
2 жыл бұрын
Yes pushing D Snape works best for me too
@StevesBeyondRepair
4 жыл бұрын
Man I've been stitching, and should be makin E's!! Those dimes are money!!
@PilotMcbride
4 жыл бұрын
🤣🤣 The straight weld would do me!! 🤣🤣 The rest were just showing off. 🤣🤣 Really liked your new invention, very nice results. Cheers, stay safe & thanks.
@mancubwelder7924
4 жыл бұрын
I was learning. It was fun. Thanks for watching Weld.com. stay healthy and safe
@PilotMcbride
4 жыл бұрын
ManCub Welder I wouldn’t miss an episode from you guys mate. Great presentations, great info and entertaining to watch. Increases my frustration, but life’s like that. 😉 Thank you for keeping the dream alive. One day I’ll lay down a line that’d make you guys proud, but that’s a long way off, 😂😂😂
@Welddotcom
4 жыл бұрын
@@PilotMcbride thanks for watching 🙏
@arch5281
4 жыл бұрын
Nice work mancub, shout out to video guy for those great shots, helps keeping me sane on my seventh week of lockdown
@Welddotcom
4 жыл бұрын
Stay safe and thanks for watching
@tonygray6509
2 жыл бұрын
thanks I learned alot new at might I've been stick welding all my life just got a miller 210 mig welder
@natas0733
2 жыл бұрын
Triangle and your modified cursive e are the best for root penetration, which in my opinion is the most important for a structurally superior weld. Yea the toes must be even and tired in as well af equal leg lengths, but without that root, you aint got Jack, Jack.
@richardfuerst5286
4 жыл бұрын
Great video. 👍 I do circles but I guess it looks like cursive e's. The "CUB" looks cool but when doing production, it's too slow. 😁
@WTFisAuserFRCKINname
4 жыл бұрын
Straight push/pull is the hardest to do; which shows the most skill. Everyone says it’s why they do circles to give the appearance of a straighter weld.
@scottpinardi4991
3 жыл бұрын
Love the MANCUB I feel like you reset every time, I feel like you’re just able to flow better🇺🇸🇺🇸
@general5104
3 жыл бұрын
THANK YOU FOR HAVING THIS SITE! THANK YOU FOR POSTING GREAT VIDEOS! Your cameraman is super good! You were talking about different patterns, and what people used. My Father taught me, at a ripe young age, how to weld with an oxy/actlyn torch, and a wire coat hanger, back before I was 8 years old. I was doing welded art and accompanying a local artist to an art flea market, selling my creations and paying for my gas and hardware, to my Dad. He kept me supplied and taught me lots of techniques. I was fluent by age 10. I didn't know there was any other way of welding until I got into junior high school. The shop teacher showed me that I wanted to make both pieces of metal, to flow together and have the filler rod to melt to cause a cascade of metal flow from one piece of metal to the other one, not so much as adding metal, but re-directing it, like dragging a path from a puddle of water on the ground, to where you want it to flow to. By introducing a wet surface, the water will not dam-up, but will nor readily follow that course. He said, welding with an electric welder is much the same as welding with the gas torch, but it was an electric arc that was melting the metal and that the direction that you pull the molten metal, needs to tie the metal from one piece to the other piece, just like the gas torch, and like the stick on the ground pulling the puddle of water! He showed me that a swirling pattern would beat BOTH sides and then coming back thru the puddle, would "drag that puddle" to the start of another puddle...an on and on, then back slightly on itself to end. That was the cursive "e". It was a number of years before MIG was even invented. Plasma, back then, was something that carried your blood thru your veins. I have kept that lesson in my head and wrist, for well over half a century, and it hasn't failed me yet! Few and far between welds have EVER failed, and that was tried with lots of tonnage. Sure, I use different patterns for cover passes, when one is needed, but the cursive "e" is my main one in stick and MIG. Torch, is more a drag and get out of the way before you allow the puddle to get too hot and either fall out or pop on you. You have to keep your P's and Q's about you, or you'll screw up! TIG, well...I understand it's just like welding with a torch, but it worry me! You have to keep your filler rod inside the phlegm of shielding gas, all the time and don't let the filler rod touch the Tungston tip, or it will light you up!!! And it has...EVERY TIME I've tried it...so I let other folks do TIG, and I do Torch, Stick, and Flux-Core MIG. I'm fairly close to 70, and I like to go "play" sometimes, but I enjoy watching young ideas. THANK YOU. I hope my story will help folks. I've always been intrigued with working steel. It was my life's hobby. I'm too shakey, now. By bead looks like a beginner's.
@agentsleepyhead
4 жыл бұрын
Cursive e club!!! Unless I am doing flux core then I tend to use the cub tooth. Pushing the weld back onto the set flux tends to cause problems.
@hernanmoreira5455
3 жыл бұрын
The most beautiful is "The triangle" minute 3:47. Look so difficult. Good job, thanks for sharing.
@jackgraff420
4 жыл бұрын
Each "dime" needs to be closer. Those welds honestly look like trash for a fillet on a bench lol
@crabtreemedia8169
4 жыл бұрын
Go ahead and show your welds then
@johnsanders7337
2 жыл бұрын
Just like playing lead 🎸 guitar!!! Put in couple years learning.... build your mental tool box. Never stop learning...
@janeblogs324
4 жыл бұрын
Title does say mig, description doesn't say mig, mancublet never says mig.... Your channel is shocking, spend 10 minutes before uploading. Whether you want views, or ability to search it, or for beginners to understand
@sulawesi-steve
4 жыл бұрын
Mancub!!! When you getting your own channel??? I joke, your part of a terrific crew, an hopefully they keep sharing the knowledge x
@ericoelschlegel7623
2 жыл бұрын
Hey just bought my first welder Lincoln 210 traded my 160 Lincoln, thanks for the info I’m gonna keep trying to learn welding,
@billfarrell223
2 жыл бұрын
Why do Americans weld so slow and cold? Anyone able to answer this any of the shops I've worked in in Ireland we all rock 24-26 volts with between 20-25 metres a minute for flat stuff like these welds I was able to get dime stack welds with the cursive e technique I can just never find anyone on KZitem doing it at that heat though lol For reference this is all on .8 wire and material thickness ranged from 2-6 mm
@LeadRakFPS
2 жыл бұрын
I'm not hating at all, but using hardwire MIG is not the best process for getting that "stacked dimes" look and really doesn't resemble stacked dimes when even close. Use SMAW if you want to get a true "stacked dimes" profile.
@eibbionlaird
2 жыл бұрын
Bad video. First yours moving too fast, much undercut. When you said to do 'e's you were just weaving/cubtooth. When you were supposed to be doing cubtooth you were doings 'c's instead. Your not doing what you're calling out. And always moving too fast
@johnsanders7337
2 жыл бұрын
I m a production welder. 10 hours of hood time... 40 plus hours a week for 6 years.. better than any school can teach a person. I MIGHT get around to making a video. Younger guys ask me why I do this why I do that lmao. Keep welding amd you ll realize one day. It's too easy yet too in your own head to take the time to explain it. And it's too funny they ask
@kcscustom9759
4 жыл бұрын
Cool stuff! I gotta say mancub the puddle manipulation pattern you came up with produced a pretty nice looking bead! I’ll definitely have to give it a try👍🏼
@Welddotcom
4 жыл бұрын
Post it up on IG and tag us
@mancubwelder7924
4 жыл бұрын
Thanks Keith. Appreciate the support. Take it Easy. Stay healthy and safe.
@jeremyr7147
2 жыл бұрын
Black smoke? Shoot I almost always have black around my welds on sheet metal. Settings off? Or maybe 22g with .030 wire on a 220v mig is just a struggle.
@mickzilla4196
4 жыл бұрын
Way to cold .. looks yuk.
@adamdalton9804
4 жыл бұрын
Stop coming up with your own techniques they are all wrong, they look rubbish. The 1st one you did 'push forward' was the correct way and it was way to cold. If you want to stack dimes as they say (which looks worse than a straight weld) you move forward then pause. Never move backwards. This way you ensure the arc is always hitting the joint and you won't get lack of fusion.
@luismoreno4927
9 ай бұрын
That mancub technique could help the E6013 achieve super strong welds or pass inspection.
@johngarlick7115
2 жыл бұрын
Why in the world are you dragging solid wire? Especially on a fillet weld your penetration is going to be garbage, and more chances for porosity, inclusions, and cold shuts. All those methods are viable with gmaw if you push, heck just dragging solid wire you would fail a proper gmaw weld test
@joshuacaylor881
8 ай бұрын
Noticed at the end, and from prior experience, WFS and voltage are turned down slightly from the push/pull technique when manipulating the weld pool with these other methods
@mistersamdi
3 жыл бұрын
just learning to weld, definitely going to try the triangle weld as well as work on my cursive "e". Thanks for the info
@JAGLIFTZ
29 күн бұрын
Your technique was taught to me by my boss and it was the first spot on dimes I’ve ever laid he showed me a lil diffrent so I guess it was his twist 2 loops drag 2 loops drag and it makes some fat dimes and fills out incredibly well
@oliverclothesoff5397
2 жыл бұрын
My welds look like bird poo. I'm not a welder but I've tried it a few times. Got flash burn once and never tried welding again. Oh God. What a pain.
@donleejr7624
2 жыл бұрын
NOW DO SOME TIG VIDEOS
@raywalters1109
3 жыл бұрын
Your Mancub weld is what a mean ol bastard that tought me to weld called happy butterflies lol. If you didn't weld his way it got scrapped. To funny the things you remember sometimes
@justinbustin677
2 жыл бұрын
Stitch for leak tight first pass. Wobbly if im needing thicker weld. Weaving to dress up a root. Drag walking if im stitch/stagger welding long sheets.
@johnwarfn
Жыл бұрын
Came here because my DIY welds look like angry worms. Going to find some scrap metal and practice.
@stevebrown7133
2 жыл бұрын
We do the stitch in our shop but we run at 580w/s and 28v. I'm thinking most of the rest would just blast holes all day
@brittinghammerforge9441
2 жыл бұрын
Beacher. It’s Jon Brittingham your old teacher. Get up with me boy. Merry Christmas
@koloan93
2 жыл бұрын
I do what I call “the slinky” just a spring pattern. Kind of like the e but without the straight just lots of circles over and over
@TheRealMisterChopShop
11 ай бұрын
Great job 🔥
@aerialrescuesolutions3277
3 жыл бұрын
Everybody keeps asking about Bob. I have not seen any word yet? I do hope he's ok too. Where's Bob.?? Jim
@CheZfrmdaWestWisc
2 жыл бұрын
Just move forward until the puddle shrinks at the toes then bring it back about half that distance until the puddle grows to the size of what's next to it and just keep doing that all the way down Whenever possible rest of cup on the deck Do it correctly and it'll come out like a machine did it
@julianwaldner6252
4 жыл бұрын
Anyone else missing the good old days of Bob Moffat sharing his experience in real world welding? With real world applications and machines? Dont get me wrong mancub, love that you're getting new people into welding, that's awesome.
@possle
2 жыл бұрын
Is there any right or wrong way for a weld bead? I'm teaching myself to weld as I have a free supply of steel and a car to restore. I found myself doing almost elongated C shapes to do my weld which I don't think turned out to bad on a lap joint at least
@thecheezybleezy7036
2 жыл бұрын
In the 11th grade I mig welded a 3 and 1/2 inch gap between a pipe and frame. It didn't hold for shit but my teacher made me weld my mistake so I wouldn't mess the measurement up next time
@mr.eparish3945
2 жыл бұрын
My stitch technique stacks out like you mancub style i recon it's all about what is comfortable. Great video!
@mickey_slipz
4 жыл бұрын
Maybe it’s the camera.. but I do not trust the heat that’s set at. ⛄️⛄️⛄️ Good breakdown, though.
@104littleal6
4 жыл бұрын
You should do a cut & etch on those technics. The CUB breaks through the pack.
@rickhambric9737
2 жыл бұрын
The more you ocellated, the more chances you have for inclusions & undercuts. Get on an old analog machine and watch the amp meter when you steady drag vs dancing around.
@jeepwk6.5L
2 жыл бұрын
Imo these all look terrible? Why would you want your weld to look that ugly. Sorry for the ones who don’t agree 🤷🏻♂️
@squawk3120
2 ай бұрын
My problem is the wire coming out and wiggling around in sporadic directions rather than straight.
@pstewart5443
3 жыл бұрын
I use stitches for small area welds. With my non-dexterity sausage fingered hands thats the only way I can make it work.
@chadwickwicky67
3 жыл бұрын
Haha, new welder here, I’m not sure if this will help me or discourage me but I can’t wait to try the techniques. Hopefully one day my welds can consistently look 1/2 as good as yours !
@artsalazar9841
3 жыл бұрын
How are your welds after 3 months of practice?
@macburgess6785
2 жыл бұрын
You need more heat. Your welds look cold. If you turned up the voltage a bit, and kept the wire speed amperage the same it wold flow better.
@hadleyroper6743
2 жыл бұрын
Draw oakleys that’s the best mig welding technique I’ve used
@nelsonsantos770
4 жыл бұрын
I like using the triangle on vertical up!
@grabbabitewelfed1641
2 жыл бұрын
Not bad, you should use a technique to tie in better, your running the what you call cursive to loosely, you should try to keep your heat/ puddle tighter , not bad though brother.
@carlthegamer9215
2 жыл бұрын
that was great really, but why don't you fill your spoon at the end, i mean isn't it common? to have your weld be complete?
@arnoldkokonya
4 жыл бұрын
Are all these only for a root pass? Coz I've seen you do a root pass on all of them.
@owenjohns6301
2 жыл бұрын
my favorite is the sawtooth, but slowing my hand at the tips and moving quickly through the middle, it keeps the weld a bit wider and lower. I'll try that mancub next time I get the chance. Thanks!
@schism47
2 жыл бұрын
If you move through the middle of the joint quickly you will not get any root penetration. You will only penetrate into the toes of the weld and your weld will fail.
@kerrinrudkin4881
3 жыл бұрын
Looks to cold the weld. Especially the first one to much wire! Not sure if it’s intended for the video
@mariagpadilla3750
Жыл бұрын
Bro Ima get my welds to look like he’s! Just amazing work bro 👌🏻
@lance1310
2 жыл бұрын
I usually do a combination of them all and then put my welder back up and wonder why I bought the darn thing.
@RingTuned
2 жыл бұрын
Yall run sooooooo ridiculously cold crank that thing up to 525 inches at 28 volts
@GhostWalker-tl5sy
2 жыл бұрын
Never oscillate with mig, you can’t do any better than consistent push
@ModernBeastx1
Жыл бұрын
Best looking to me was the triangles. The one im most comfortable with myself is the cursive e's sometimes ill even do o's.
@fordnut4914
3 жыл бұрын
This is all good stuff ..but I can lay a pretty mean JB weld bead down.
@terrysibley9636
Жыл бұрын
Nice work. Question, what's the best way to store a welding helmet.
@jodybgoode
2 жыл бұрын
Dime stack welds are ugly. Robot welds are beautiful.
@reneguay1347
2 жыл бұрын
Looks like you are a little cold and looks like when you come back into your weld you may have lack of penetration
@maxtremblay
2 жыл бұрын
I often use the stitch when I have gap. I prefer thicker plate tho, can go much slower, ur was a tad too fast to look real good
Пікірлер: 448