Buddy I just want to Thank you. My Craftsman wasn't building or keeping full pressure. Followed your video and viola, the same broken plastic gasket. I used the Right Stuff sealer and some Permatex high performance thread sealant paste. Not only has my compressor reached max pressure but for the first time in 16 years she has held a steady 90 psi in the tank for over 24 hrs. Bro you the bomb. Thanks again.
@SevenFortyOne
3 жыл бұрын
Glad my video helped!
@drh3474
4 жыл бұрын
Thank You for posting this 741. Mine has leaked slowly for 10 years and now holds pressure great!
@Indianaxes
3 жыл бұрын
Made my day! My washer was also broken. Your video saved me time and money. THANKS
@cmd247
5 жыл бұрын
WOW! Exactly what's happening with mine. The plastic washer on my air compressor looks like the letter "C". I thought it was supposed to look like that! PS: When I put the knob and spring back together, it was easier to put it all together BEFORE placing it back on. Can't wait to try this.
@johntube2525
4 жыл бұрын
Thanks for the video, it encouraged me to do something I needed to do for a while now. Found several leaks using a spray bottle with soapy water. My regulator parts were all good. Just needed to add Teflon tape. Then hand tighten, then tighten about 1/8 to 1/4 turn with wrench, Tighten all the other leaky connections and the exact same Craftsman compressor you have is holding pressure like it did 20 plus years ago. Good video!
@gybx4094
2 жыл бұрын
I have an old one like that, probably 28 years old. I had to teflon the fittings, but it still has a minor leak. Still, it has served me surprisingly well with the only service being draining out the water periodically.
@jcobra09
2 жыл бұрын
I have the exact same compressor with the exact same problem. It was inherited from my grandpa, so I don’t want to get rid of it. I’m going to fix it this week. Thanks!
@erniegreenthal6179
2 жыл бұрын
Been working on my dad's old air compressor for almost 2ys now due to time allowed to work in the garage. Thank you for this video!
@65csx83
3 жыл бұрын
Very informative and well presented. Attaboy on a successful fix. I've used plastic milk bottles to make washers and other small pieces such as the one you needed when it would have been unlikely to find them otherwise.
@BigAl7976
Жыл бұрын
Reminds me of using notebook back for gasket
@65csx83
Жыл бұрын
@@BigAl7976 Did a cam change on my friend's '65 GTO and had to use a coffee cup lid for a thermostat housing gasket. Years later I saw the car again, new owner, still had the coffee lid. It was the old style lid with the tab.
@LBCAndrew
3 жыл бұрын
Teflon tape isn't made for filling gaps to stop leaks. You should have used just the RTV sealant. Teflon Tape is made to reduce friction so you can tighten a fitting further than you normally would, engaging more threads .
@billthornburg9540
10 ай бұрын
You are partially correct. Teflon tape will make it easier to completely thread your connections, but the Teflon tape itself will help leaking by filling in the groves of the thread, thus creating a seal inside the connector. Been using Teflon tape for years to prevent water and air leaks. I don't recommend using it for liquid fuel, like gasoline. Liquid gas will break down Teflon and may get into things you don't want it to be in. Using Teflon tape in this manner is perfectly fine and less messy than RTV sealant.
@bcamk
4 жыл бұрын
I did the gasket sealer trick on mine, the white washer was in pieces. I'll let you know it it works tomorrow! Thanks
@andyhansen2030
4 жыл бұрын
Thanks for the video. I didn't have the broken washer issue, but your video showed how to take it all apart. I found the rubber diaphragm thing had some type of coating of dirt/oil on it. Cleaned it up and runs perfect now!
@jerrywilson2146
4 жыл бұрын
I have one like this as well with the same problem. I tried a 1 1/8" O.D. O-Ring but nothing is coming out. Maybe the 1/8" O-Ring is restricting the diaphragm. I think I'll bleed the air and try your silicone method. Yes, the regulators AC-0007 were much more expensive than I'm willing to pay right now! Thanks for the video!
@PBYFRED
4 жыл бұрын
Thanks for the video !! I have the same problem and it just needed cleaning up. But I was hesitating to do it until I saw this.
@lancastergerard
10 ай бұрын
Gonna try this tomorrow on my craftsman. Fingers crossed
@gregorymathiesen8713
3 жыл бұрын
Thank you. Note: the seal being repaired is between the bottom of the diaphram and the housing, The top side of the diaphragm and chamber above the diaphragm are at atmospheric pressure and the threads have atmospheric pressure above them. I repaired mine with silicone form a gasket applied to the bottom edge of the diaphragm.
@joebrewer5885
3 жыл бұрын
Basically gluing the diaphragm to the housing? Do you suspect his RTV sealant squished around the rubber diaphragm sealing it as you did with it on the bottom? And where did the rest of the white ring washer go, mine was only partially there also, no way it went out the air line thru a tool.
@Xray.71
5 ай бұрын
Thanks! I bought the same one off the marketplace and got the same issue!
@jplieurance
4 жыл бұрын
Going to try this. I just ordered the replacement regulator (AC-0007) from Amazon: $135, including tax. I like the idea of saving a buttload of money!
@jakestellar4600
4 жыл бұрын
Jeff Lieurance $135 ??? Damn
@TheMinnow101
4 жыл бұрын
@@jakestellar4600 A new compressor is about the same money!
@jakestellar4600
4 жыл бұрын
Carl Jones uhh HAHAHAHA NOOOO.... Maybe a cheap portable pancake compressor but not cheaper to buy a new one like mine, I got this one from my dad and already fixed the start and run caps now just need a new regulator
@Fireinahorn
2 жыл бұрын
@@jakestellar4600 +2 🙄
@Fireinahorn
2 жыл бұрын
Part obsolete, no longer available for my Craftsman 20 Gal. Congrats to all Craftsman owners!
@jimates2191
Жыл бұрын
although this fixed the issue, it was not the problem. The plastic washer is to prevent the housing from contacting the diaphragm and turning the diaphragm, not to seal anything. Without the washer the diaphragm will turn and break the plastic regulator piece. Like a cardboard gasket on a kitchen sink strainer, it is only to keep the rubber from turning because it is contacted on both sides. Removing the cover in the future will likely result in breakage.
@richardbudwee9045
5 жыл бұрын
you hit the nail. watching ur video showed me how to fix problem in my garage. Saved my son a lot of $$$... Thanks... (ps. he did not tip)!!!
@pandabear1961
3 жыл бұрын
i have same problem was going to take it to shop. but now i will try and fix it myself. Thank you.
@justinrwolbert
6 жыл бұрын
Thank you very much for making this. I have the same compressor with the exact gasket problem and this perfectly met what I needed. And I had the rtv gasket maker and Teflon tape already so it was quick and easy.
@guitaryst
5 жыл бұрын
Same here! Great video. Thanks!
@tombo552001
2 жыл бұрын
I want to say the teflon tape didn't seal but thee silicon did the job. Nice video
@Reeser00
5 жыл бұрын
I’ve got the devilbiss version. Exact same regulator. Exactly what I needed! Thank you
@John-yr1sf
4 жыл бұрын
part number?
@dhansel4835
9 ай бұрын
At time line 5:15 I call those pliers 'Channel-Lock". A crescent wrench has a wheel that opens and closes the jaws.
@SevenFortyOne
9 ай бұрын
I usually call them water pump pliers...not sure why I said crescent pliers. Slip of the tongue I guess
@dhansel4835
9 ай бұрын
I haven't heard that term "Water Pump Pliers in a long time". I have to now work on my Craftsman air compressor.@@SevenFortyOne
@glenngoodale1709
6 жыл бұрын
what can I say your videos are always so good
@SevenFortyOne
6 жыл бұрын
Thanks! I'm glad you enjoy my vids!
@Pushyhog
6 ай бұрын
All on amazon, just rebuilt mine. Its like new
@CalPil0t
5 жыл бұрын
Looks like my identical problem. Will have to tear into my regulator. Subscribed, saw ham ham radio subjects as well, 73.
@SevenFortyOne
5 жыл бұрын
The compressor is an easy fix...shouldn't take you too long. I have a mix of ham/electronics and general repair videos...thanks for your interest!
@woodywoods5373
3 жыл бұрын
Hey Thanks for the vid my compressor had the same problem all I had to do is tighten the ring nut that holds the regular down fixed it,😊 my compressor is a craftsman 6.5 hp twin cylinder 33gal 240v had mine since new 20 years ago and I just replaced the cylinder sleeves and piston rings and gasketsshould last another 20 years.But it's still loud lol
@johntube2525
3 жыл бұрын
Hey woody woods, I have the 20 year old 25 gallon, just like the one in this video. This last week it started going up to only 80 psi, no higher. would run continuously while I used it to spray paint. Today it is only going up to 40 psi, no higher. I suspect I need new head gasket, but decided to look on KZitem before going any farther. Do you think this could be a head gasket problem and where does one get parts? Not sure how to even get to the head gasket or do any trouble shooting. Any ideas?
@woodywoods5373
3 жыл бұрын
@@johntube2525 Hey johntube here's my kit that I used from TOOLMART Craftsman O Ring Kit For Air Compressor 916014
@charleswaldrop646
3 жыл бұрын
this was very informable, but one suggestion would be that the camera should have been on the opposite side, because the back of his hand was in the way when he was showing how some parts fit on the base of the regulator.
@rogeriorodriguez1212
4 жыл бұрын
Seriously, thank you for making this video very helpful very clear able to use this on my own compressor 👍
@stancrader
4 жыл бұрын
Perfect! Very helpful...
@rickwagner3797
11 ай бұрын
i literally had a new regulator control replacement in my amazon cart when i saw this video and it worked exactly as described. Has this been a long term fix for anyone? thanks for the video
@SevenFortyOne
11 ай бұрын
Yes, mine is still working without any problems since this video was made
@jdub3103
5 жыл бұрын
I just used thread sealing tape on mine no RTV and it sealed up with no air leaks guess I got lucky.
@z95m
6 жыл бұрын
The gasket maker RTV comes in handy!
@bobmoe9221
2 жыл бұрын
Thanks for the post. I have the same compressor, with the same problem. Subscribed.
@christophernoah2564
Жыл бұрын
Thank you for everything it worked out great save me time and money. ATTA BOY!!
@geoanth
4 жыл бұрын
Brilliant, exactly my problem, will soon have that sorted, many thanks.
@dhansel4835
9 ай бұрын
My Craftsman compressor won't cut off. It used to. Is there an adjustment to make it cut off at about 110-120lbs?
@saulcolorado4775
5 жыл бұрын
Need help have the same unit but only stay on 60 psi no matter the regulator being turned right to raise psi
@michealpeter5131
5 ай бұрын
Good 👍
@scottmarsh4696
3 жыл бұрын
Great idea! However, does anyone know where to get this replacement regulator that reads both tank and regulator pressures? Mine has missing parts.
@SevenFortyOne
3 жыл бұрын
Sears parts direct used to have parts for all the craftsman stuff...not sure if they still do or not
@knighthawk86855
2 жыл бұрын
Please share the model number of your compressor, I have a Devilbiss but I can see the model number it's worn away, by looking up the model number of yours I can find the part numbers I need any help would be appreciated ty.
@dalee.mccombs8571
2 жыл бұрын
A proper size oring should work!!
@frankefkovics9863
3 жыл бұрын
Great help👍👍
@BRENT3143945
4 жыл бұрын
Crescent pliers was a new one for me lol
@rickeykeeton4770
2 жыл бұрын
I have a 15 gal craftsman compressor model 919.167241 that will not turn on. I removed 3 screws from one side of the cover. It splits at the top but still does not separate at the bottom so I can remove it and get to the motor snd components. Comment?
@originalyummer
6 ай бұрын
Mine did that. Theres a thermal fuse protector tied to the motor windings under the shroud. My fuse was good but a wire was broken off. 2 Phillip's screws underneath bottom of the shroud realease the motor and all from the rails. Then take a long t-25 to remove shroud fasteners. Lay it on the side where the fasteners come out. You'll see the fuse tied to the copper. Its wrapped up in electrical tape. Good luck!
@variont8017
5 жыл бұрын
I got the same one. My won't cut off when it should be off.
@charliej8803
4 жыл бұрын
Very helpful,thanks
@bigsexymanbear1950
4 жыл бұрын
You're the man! Thanks
@bnlinds
5 жыл бұрын
Thanks you helped me!!!!
@phorest
Жыл бұрын
Has anyone found a replacment washer/gasket that fits? Got dimensions or a source? I have the same compressor with the same leaky regulator issue.
@riv1950
5 жыл бұрын
Nice video, thank you very much.
@jplieurance
4 жыл бұрын
Used the Permatex and was able to build up pressure in the tank. However, could not adjust the pressure regulator - it never registered above zero. Bled the tank a couple of times, then refilled -= same issue, but the last time it started leaking from the pressure switch. Any ideas?
@SevenFortyOne
4 жыл бұрын
Maybe you got some permatex some place it didn't belong by accident and clogged something up. Also make sure all the parts went back together in the correct order and places.... otherwise I'm not sure what could be wrong
@patrickpitts1638
Жыл бұрын
Do you have a model number ??
@MrPhoenix1800
5 жыл бұрын
I would not have used that gasket just go down to the hardware store..that gasket is going to gail anyway with how much you turn the regulator
@jhcampbe
2 жыл бұрын
The cover looked like the hardest part of the job.
@SevenFortyOne
2 жыл бұрын
Is that Jim from TTM?
@jhcampbe
2 жыл бұрын
@@SevenFortyOne Naw, I'm just a guy with a leaky craftsman compressor.
@SevenFortyOne
2 жыл бұрын
Right on .. I thought you might have been an ex-coworker. Good luck with your repair!
@gordoncushman7807
3 жыл бұрын
Strange design for so called adjustability of tool pressure. Luckily 100 psi give or take will do for these units.
@michaelmason7272
2 жыл бұрын
I am in a pinch, my compressor is broken and I need to know how to fix it, I don't need to know what you THINK or your half baked non -solutions. I need an answer NOW and your video succeeded in waiting my time.
@SevenFortyOne
2 жыл бұрын
So why didn't you call a pro? It's not my fault you can't solve your own problem
@phyllistene
4 жыл бұрын
After you make the repair are you still able to adjust the pressure or are you stuck with max psi?
@SevenFortyOne
4 жыл бұрын
Still able to adjust...works the same as it did before repair
@jakestellar4600
4 жыл бұрын
Mine won’t shut off.
@bcamk
4 жыл бұрын
I don't know what happened, but when I turned on the compressor two days later, the tank got up to about 40psi and then the compressor end blew up, pieces everywhere! lol Oh well, time for a new compressor i guess.
@evansautomotive307
4 жыл бұрын
Quick question man, what is that valve behind the switch towards the motor? Does yours leak air out when it is running? I feel like my compressor fills up kinda slow and im trying to find out why. Thanks!
@SevenFortyOne
4 жыл бұрын
This video shows how I repaired that valve....you should watch it
@evansautomotive307
4 жыл бұрын
@@SevenFortyOne You repaired the valve inside the regulator. There is another valve, almost like the stem of a bicycle tire that is attached to the end of the tube right behind the switch box. Go to 6:06 . it is the tube in between the motor and the switch. Go to the end of that tube and there is a valve. I just want to know if yours leaks air when it is running
@mlkcrtnz
Жыл бұрын
CHANNEL LOCKS!! LOL 🙂
@tristenfletcher577
5 жыл бұрын
I have a 6hp 30 but it takes awhile to fill up would u know what's wrong with it
@SevenFortyOne
5 жыл бұрын
Not much Info to go on here...sorry
@matthewtug
4 жыл бұрын
Your cylinder/piston ring is wore.
@monsterkhaos9292
5 жыл бұрын
Hey I have the same air compressor would you be able to tell me like what on and off switch that is I need the on and off switch the Box I can't order the on and off switch because the model number and serial number worn off on my unit
@SevenFortyOne
5 жыл бұрын
Mine is model 919.165030...try usi g that number to search for your part...good luck!
@monsterkhaos9292
5 жыл бұрын
@@SevenFortyOne because it looks like the same on and off switch box will work on mine I'll have to look after lunch to see if I can find it
@monsterkhaos9292
5 жыл бұрын
@@SevenFortyOne thanks
@rumsiker
3 жыл бұрын
Wrong you never put silicone or like on that , what you could do is get a card board like shoe box and punch out a gasket
@miguelangelvalderrama1808
4 жыл бұрын
That compresor is dusty man, 🙄 clean it with water and soap.
@customcreations-rickkramer5357
6 жыл бұрын
It may have fixed the problem for now but that's not the correct way to fix the issue. Probably cost more to buy the gasket maker then it would be to buy a gasket. But at least it's his own tool and not fixing it for someone else for a fee.
@SevenFortyOne
6 жыл бұрын
Sometimes you have to be a little bit unconventional to solve a problem. I had the RTV on-hand so since it was already bought and paid for the fix was almost free and done quickly. If I ordered the "correct" part I would have ended up paying $5-$10 including shipping and would have had to wait for it. And consider this - that $5-10 gasket would only fix ONE machine. A tube of $5 RTV could probably fix 100. Not only that, I'll wager it will last longer than a crappy Chinese plastic washer.
Пікірлер: 104