Thanks for the review. Just ordered the Sears set for $200 (shipping would have been $19, but there is a Sears Hometown nearby). There's a lot of filler in there, but it's kind of nice to get every bit you might conceivably need instead of eight #2 Phillips bits. And I completely agree with you about Eddie Lampert.
@shanedawson-xt3wt
Жыл бұрын
The set now is $259.99! How did you get it for $200? Coupon? Thx
@blazebrady3659
Жыл бұрын
One note....the driver in the Sears set is made for all those bits you don't want to count (which I'm glad you did because I 100% agree) and the driver in the Lowes set has a socket end and can be used with the sockets....so that's a plus for the Lowes set in my opinion. Great review!
@jorgemercado7505
Жыл бұрын
It's a shame what was done to Sears 😥
@blautens
2 жыл бұрын
Useful review. I really miss having a Sears in town where I could drop off a broken tool. I think it worked out okay for them - I always ended up buying more tools before I left. Lowes doesn't have the same appeal to me.
@jasonbrown4819
Жыл бұрын
I owned the clam shell box, and it fell apart after 2 months of use. The construction is not meant to handle the weight of the tools inside and after moving it in and out of the truck, it was like it just exploded. After having to pick all of the sockets up out of the parking lot on 2 separate occasions, I threw the box away.
@chips4289
Жыл бұрын
I noticed the newer sockets and extentions have a wider knurl if you are turning them by hand which I do sometimes ..snug by hand then crank in with ratchet
@dilemma2803
7 ай бұрын
good review, i remember buying a crafstman set from a kmart and just going back to the store and replacing a drive ratchet and only proof required was the drive itself. i bought a kobalt set and it is so lacking in versatility but i'm leary of the sloppiness in the mechanism on the lowe's drives
@Soprano0913
Жыл бұрын
I really like the lowes box. What do you think it would cost to get the missing sockets that are in the 450-Piece set. Also which sockets are missing?
@leopitre7907
Жыл бұрын
I heard the sockets on the 450 piece set all fit nuts and bolts they were made for a little loose compared to how the old craftsman sockets were...if it was a 9/16 bolt or nut and you used the 9/16 socket it wasn't a tight fit and would wiggle.
@PFab
6 ай бұрын
6 point vs 12 makes a difference as well
@harrygrimley4352
2 жыл бұрын
Very interesting and informative. Thanks for sharing this with us.
@vinny_af16
2 жыл бұрын
Honestly I like the sears craftsman still. The real deal
@jamesm568
3 ай бұрын
Versatack for the smaller set may be more handy for some in the ecosystem.
@user-fo7kq3sr1o
5 ай бұрын
I just tried to exchange the craftsman ratchet in my hometown of liberty Kentucky at Ace Hardware and they would not exchange it. They said their warranty was no good no more I I thought craftsman tools were warranty for life and would be exchanged anywhere that sold them
@robertmcgee6853
10 ай бұрын
The Allen wrench count is a joke, but don't forget the add on cost of the additional drawers. I know I have three sets of drawers and two of the parts bins... the good part on that is that it all fits on a Harbor Freight moving sled for $12 REALLY well, still breaks down for mobile use like on the farm. That kit in particular REALLY skimps on the 1/2 inch drive set of sockets with a whopping 6 sockets 3 and 3 for SAE and Metric.
@Brandon-sb8li
Жыл бұрын
The only problem I have is that some of the driver bits and the Alan keys are just laying around in the top compartment instead of being locked in a slot.
@fredsmith7964
2 жыл бұрын
Since the Sears Hometown Stores are closing there are a lot of NOS deals going on.
@jakethomas_419
Жыл бұрын
If one socket is an individual tool then so is every hex key. Can’t count them differently. Find a mechanic’s set above 200 pieces that doesn’t add in driver bits and other small pieces. They all do it.
@michaeltnnn
Жыл бұрын
Great review. Thanks for your support 🇺🇦✌️
@harrygrimley4352
2 жыл бұрын
Those bits you showed up close are common in schools for bathroom dividers and federal buildings. Different so people can't take apart things. 😁
@kev-reviews
2 жыл бұрын
Thanks for sharing
@GeometryWars
2 жыл бұрын
Another great review
@Soprano0913
Жыл бұрын
What's the weight difference?
@tarstarkusz
2 жыл бұрын
You missed one important point about the Lowe's and that is that is that Lowe's still exists and ordering from craftsman website involves shipping costs. The shipping costs of the craftsman will probably be outrageous. Like a hundred Dollars or more outrageous Shipping was already way too high before oil and gas prices started going through the roof. Diesel is up around 10 Dollars a gallon in certain parts of the US. So you really have to shipping-adjust your costs if you don't have a Sears near you. You don't even get out of sales tax anymore when absorbing that enormous shipping cost by buying online.
@kev-reviews
2 жыл бұрын
Valid point. Although I don’t know if they offer prepaid returns or no. Fortunately I haven’t had to make a warranty return on craftsman tools in a long time 🍀
@tarstarkusz
2 жыл бұрын
@@kev-reviews That's a good point I didn't think of. With the new Lowe's stuff, you can just exchange it at the store for the Lowe's one. What I meant was buying the whole set (which IIRC, you said is still available on the Craftsman website, I looked but couldn't find it with the number or the description) from the craftsman store would mean a huge shipping charge. I would imagine it weighs close to 50 pounds or even possibly more. Big bucks. Like if it's 219 for the large set, tax and shipping will probably make it fairly close to 300 dollars instead of just 219 plus sales tax.
@kev-reviews
2 жыл бұрын
Did I said craftsman website availability? I meant Sears.com for the 450-piece set
@dr.spidershoes
Ай бұрын
Is sears made of USA?
@christopherpatrick2343
Жыл бұрын
Great
@Omnivorous1One
Жыл бұрын
Anyone know if the socket sizes are stamped or etched on the sockets?
@brianshelton2177
Жыл бұрын
They are on the sears set
@tarstarkusz
2 жыл бұрын
17:00 Those are probably casting lines, not weld lines.
@kev-reviews
2 жыл бұрын
Being that it’s coming off an angle I would suspect a welded end, but you could be right
@cup_and_cone
2 жыл бұрын
@tarstarkusz Wrenches are forged, not cast. You can't forge a casting. In the case of that little wrench, I'd bet it's punched out from sheet steel then stamped/forged.
@Soprano0913
Жыл бұрын
can the Sears ratchets fit in the Lowes versa stack?
@kev-reviews
Жыл бұрын
Yes. The trays are modular, so they can fit in the versastack add-ons
@Soprano0913
Жыл бұрын
@@kev-reviews im sorry just want to clarify where the 1/2", 3/8" , and 1/4" ratchet tools are placed in the lowes set can you put the Sears ratchets in there instead?
@darrellmitchell6056
10 ай бұрын
200 pieces of unnecessary pieces of bits... that makes up 450 pc set
@darrellmitchell6056
10 ай бұрын
They should have bolt and nut extractors in the set rather than a bunch of Bits
Пікірлер: 44