Somewhat helpful but needs to describe the steps he's taking and why. Needs to increase record volume as well.
@namatc
5 жыл бұрын
Hi Shark Muck....I got a question, I just recently bought a new boat with the SeaStar system. We had a leak and developed air in the system and it would skip. The helm has been replaced and we still get a skip or knocking coming out of a hard over turn....doesn't do it all the time or do we notice while underway, mainly while sitting with the motor trimmed down and off. SeaStar is telling me this is normal and my dealer said several boats at the lot do this as well.Can you confirm what they are telling me to be true? I have searched and spent several hours on here (internet) searching skip or chatter and just saw your video. Thanks.....
@stevenreisig7489
2 жыл бұрын
Marc , I have a new to me NauticStar 215 XTS with a SeaStar Hydraulic steering system. Took it out today and the steering was stiff. Is it most likely low on fluid ?
@captainjayc9217
3 жыл бұрын
I wonder if you need to punch a hole into the bottle to break the vacuum. And why there is a leak in the screw-on-cap on the bottle? Is this by design? Or is the metal cap just doesn't match the bottle?
@capttomhughes
Жыл бұрын
Thanks for sharing you knowledge - now I won't make a miss anymore!
@edwardlandry291
2 жыл бұрын
What is the fitting that screws to the bottle? Thanx!
@Rparrish22
Жыл бұрын
Hi Mark, off topic on an old video but I see you have the same boat that I just purchased. The switches are worn out on mine and I want to replace them. Can you send me a pic of your switch board and what they are so I do not have to trace wires and diagnose what each one does. I would greatly appreciate it.
@johnm8998
5 жыл бұрын
Where did you buy those connectors and size?
@mshuckm
5 жыл бұрын
Lowe’s! Air compressor hose section
@nahumhenry9620
3 жыл бұрын
@@mshuckm I figured .. thanks tho
@johnvaras1764
4 жыл бұрын
Looks Like a bubble purge kit
@captainjayc9217
3 жыл бұрын
Great idea of using a quick-connect to connect to the helm. Otherwise, this can be quite a pain to screw onto the bottle while the other end of the hose is already screwed into the helm. No wonder this kit is more expensive than the all-plastic kit. We get what we pay for. Thanks. Unfortunately I have already purchased the all-plastic kit. Oh well...
@hookdupfishing292
3 жыл бұрын
Great video! Thx Shark!
@alan_davis
4 жыл бұрын
Please for the love of.... Put a cloth around the pipe before you disconnect it from the helm so it doesn't drip hydraulic fluid on the console... yours sincerely, every boat owner ever.
@luapkcuhs
2 жыл бұрын
shut up
@johnshirley8099
4 жыл бұрын
Couldn't hear this video even using head set.
@bryian5585
4 жыл бұрын
Vague video is vague
@Tim300win
4 жыл бұрын
Get a new tripod please.
@goinginsane37098
4 жыл бұрын
Jeez the audio in this is crap. so Bad.. the nonstop scratching sound and can't even hardly hear the guy unless you crank it so loud the scratching sounds blow your ears.. just horrible.
@thomastirolflorida5363
3 жыл бұрын
sound like a used car salesman
@luapkcuhs
8 ай бұрын
@@thomastirolflorida5363you sound like a whiney biotch
Пікірлер: 21