Man, those are some beautiful crimps. Been metallic reloading for a long time, about to enter the shotshell world. Appreciate the video, hope I can get mine to look that good!
@saltcreekammo
5 ай бұрын
Like in metallic reloading, nice equipment makes things easier (and perform better).
@toronadogofast7868
7 ай бұрын
Was having trouble setting up the Hornady 366.watching videos like yours helped. Was doing the pre crimp way too tight. Then the middle crimp was all wrong. Was running the center mandrel in too far. Whenever changing loads of hulls I start out with one initial shell with the way it is set up. If it doesn't look right then I back off the mandrel a little. Amazing how much it changes the crimp. I have Hornady 366, OR 800 plus with 4 heads loaded, Lee load all, Mec 650n, and 600jr. I would say for speciality loads I prefer the 600jr. It is easy to set up, can control the crimp pressure and makes load development much easier.
@devilsadvocate783
5 ай бұрын
Freaking beautiful crimp my man!!!!
@gradyfuller4880
7 ай бұрын
Awesome Pro Tip Sir. Thank you for sharing your knowledge.
@theshotgunscientists
7 ай бұрын
I just got some omv dies someone sent me, they attach that same way to my Lee load all and now I’m getting far better than factory looking crimps with my .410 loads now.
@nathanmorkovsky2855
7 ай бұрын
Man of perfection. Thank you.
@RDReynoldsOutdoors
7 ай бұрын
Just showing how much time and effort goes into each triple curl. keep up the good work!!!
@saltcreekammo
7 ай бұрын
Too much time 😅 👍
@mattkissmyasstyrants8676
7 ай бұрын
Looks Better than factory to me, Nice work, and shirt lol.
@saltcreekammo
7 ай бұрын
Yessir! 😆
@johnanderson186
6 ай бұрын
Works perfectly the way you got it. I working on getting one of those omv starter crimps, but man they’re steep. $90! I just use my Mec and finish with the OMV #2 You could just go from the Ribasstore die straight to the sp2 die on your drill press, omitting the Mec crimp die completely. It’ll produce a crimp just a good.
@rcgray1957
Ай бұрын
Very good video, great job
@chaecoco2
6 ай бұрын
How did you attach the OMV crimp starter to your MEC. The arbor for the OMV starter isn't designed to fit the MEC. How did you modify it to make it work. Thanks
@jwopd
4 ай бұрын
Whats your recommend stack height and overall shell length for a 2 3/4" 12ga shell for a perfect crimp? How much space between the top of the shot and rim of the shell?
@knallis.hjemmelading
7 ай бұрын
😊 Thanks
@DestructionBlack
4 ай бұрын
3:00 whats the brand and version of crimper? OMV2? Loved the video btw.
@BrokenBarBox
6 ай бұрын
This is why you pay a little bit more for custom ammunition. The care and professionalism is not only evident in the appearance, but in its performance as well
@jaybird1970
2 ай бұрын
What is the name of the center die and where did you get it.thanks
@SusieECharters
20 күн бұрын
Could you please tell me who makes the center die and is there a model #?thanks. ( Good info, thanks for the instruction)
@tymz-r-achangin
6 ай бұрын
I got rid of Ballistic Products crimp starter after constantly having problems with it not consistently forming crimps that would then easily slide into my Mossberg 500 pump 12ga. Was way easier to just go with once-used Winchester and Remington hulls and have the Mec 600 JR's factory crimp dies give a nice uniform crimp with MUCH less time and work of going with other ways
@williamcarter746
7 ай бұрын
What is that center die you are using? Excellent video.
@saltcreekammo
7 ай бұрын
GAEP Ribassatore
@clydeprovost8967
3 ай бұрын
Where did you get the center die?
@thursty15
7 ай бұрын
Whats the name of the GAEP die that domes the initial star? Ive been roll crimping for a couple years now, but want to learn more about fold crimping. Thanks.
@saltcreekammo
7 ай бұрын
GAEP Ribassatore
@raymondbuie5292
7 ай бұрын
Very good information. Neat attachments to press. Question: are the new hulls skived for this crimping or just as is?
@saltcreekammo
7 ай бұрын
The hulls are factory skived
@raymondbuie5292
7 ай бұрын
@@saltcreekammo great, Thank You!
@Conek2u
2 ай бұрын
NICE LOOKING CRIMPS, DO THEY SHOOT BETTER? IS THAT THE SAME TOOL THAT COSTS NEARLY $100?
@quistad6699
6 ай бұрын
What manufacturer is the "center dye" you're using? The one that wasn't attacked to anything...thx
@saltcreekammo
6 ай бұрын
GAEP... But OMV makes one as well. Either way works great.
@jakelivesey3163
6 ай бұрын
What attachment do you use to attach the starter crimp to the press itself? Looking at BPI and all I can find is omv drill attachment?
@chaecoco2
5 ай бұрын
My question exactly. Don't know if he has seen your post, but an answer would be helpful.
@mikeholston9263
5 ай бұрын
I have the same question how to mount it . Hopefully he will get back with a answer.
@josephbarlow8025
4 ай бұрын
Same here!
@brodycampbell2990
7 ай бұрын
Are yall busy with orders? Do you keep up with the setup you have?
@saltcreekammo
6 ай бұрын
We are able to keep up with orders. Currently about a week out on bigger orders. I anticipate around a 25% increase next season, so I have equipment coming and/or being worked on to facilitate the demand.
@brodycampbell2990
6 ай бұрын
@@saltcreekammo awesome man! Glad to hear
@JoseluisMarra
6 ай бұрын
Scusami vorrei sapere per acquistare una machina di queste come si può fare grazie
@joearledge1
6 ай бұрын
Really dumb question, do you legit no bs hand load each and every shell you sell?
@saltcreekammo
6 ай бұрын
Everything is 100% hand loaded.
@joearledge1
6 ай бұрын
@@saltcreekammo holy cow! I figured you at least had a few progressive presses running. That's insane. Well done Sir, I know that's a lot of work.
@chrossphyre
4 ай бұрын
Anyone else grit their teeth when he knocked the base of that loaded shell against the metal drill press chuck??
@saltcreekammo
4 ай бұрын
Interesting you felt the need to comment this at all.
@chrossphyre
4 ай бұрын
@@saltcreekammoYeah, pardon my concentration on safety when reloading.
@Skilpadjie1
4 ай бұрын
I sold my MEC900e and got the OMV Smart Box. It makes 100 times better ammo.
@chriswilliams5268
4 ай бұрын
Sorry Cant get past any fire srms owner wearing a Hillary for President shirt. Yikes
@saltcreekammo
4 ай бұрын
Reading is hard... Not an Infowars fan I see.
@raycar1747
4 ай бұрын
Does it Say Hillary For President. I Can't see All of your shirt.?????
@saltcreekammo
4 ай бұрын
PRISON!..... Haha got yah 😜
@raycar1747
4 ай бұрын
Thanks,,,,,,,,, LOVE IT TRUMP 2024@@saltcreekammo
@saltcreekammo
4 ай бұрын
@@raycar1747 this is an old Infowars shirt from 2016... Old ratty shirt good for working in.
Пікірлер: 54