I have an old PC series system from DSC installed in my house. Its a very reliable system and is STILL alive and kicking. DSC is a great choice if you want something that will work and last.
@lukethis2924
3 ай бұрын
Your set up is really cool dude. Nice stuff! :D
@RADX223
9 ай бұрын
DSC: the bosch of Canada
@dfd5858
10 ай бұрын
Good choice on the system! I maintain a lot of these along with napco systems at my school board and the dsc systems have way less problems and you don't need to haul around an XP laptop to program them! the end of line problem is bad firmware usually
@nics-systems-electric
10 ай бұрын
Have you experienced this problem with end of line ? I've given up on trying to figure it out as electrically it all seems fine and I have the option set to yes for end of line resistors
@dfd5858
10 ай бұрын
@@nics-systems-electric I think it’s caused by a glitch in the panel firmware, I would disable, then reboot, then re enable and see if that does it.
@Alexsmartway
4 ай бұрын
Make sure you got the correct resistor 5.6k check section 013 make sure 1 is set to No and if you want double EOL make sure it’s set yes or no
@kevinbradt835
10 ай бұрын
I use the eyezon envisalink 4 for my alarm system it also can be connected to home automation it can also let you monitor it remotely or locally from your phone or a central station
@suchcone
10 ай бұрын
Have you considered microwave or combined sensors if the PIR sensor keeps triggering? I find heaters or even just natural heating and cooling of a room (e.g. sunlight shining in) can set off PIR sensors quite easily. Cool setup though!
@nics-systems-electric
10 ай бұрын
I would if it became an issue however if the only times I have false alarms is when large objects fall over I'm not too worried
@jaredw83
10 ай бұрын
You should get an adt rx7c siren there extremely loud in my opinion
@Captain_charlie_avgeek
4 ай бұрын
Smart system!
@kylebruns7607
9 ай бұрын
I like how you made a fire alarm and the security system and I like how the door shut’s
@chrispratt7363
10 ай бұрын
I love your videos keep up the great work
@nics-systems-electric
10 ай бұрын
Thanks, will do!
@NewEnglandAviaton987
3 ай бұрын
@@nics-systems-electricmore durbality testing
@nicholaspiper8137
10 ай бұрын
Nic you should make you key for bid arm the alarm you is the keypad input and the emergency output on the Aser controll panel
@Catnap606
26 күн бұрын
I love your videos also❤
@benrodriguez4905
7 ай бұрын
I love the system test
@brianfortuna6691
10 ай бұрын
I have a request for question. Could you add strobe lights for security alarm only? Please keep updating about security alarm with strobe lights. 🥺👉🏻🚨
@EEEE_EEEEEEE
3 ай бұрын
Why DSC found?
@uniteddrones7626
10 ай бұрын
I installed a few of these I can say the 32 had 2 pgm terms while I see this one has 4 pgm terms I love programming these especially with the laptop PS. Ip auto dialer.
@DaKingIan01
10 ай бұрын
I see many places use this as in my area there are a lot of robberies so it works well for people
@Allotmenting_Plot15
9 ай бұрын
This is my school lockdown alarm
@justaguy4417
4 ай бұрын
Do you ever use glassbreaks?
@nics-systems-electric
4 ай бұрын
No I don't
@Twentytwo22-entertainment
5 ай бұрын
“Generator Plant”
@Random_Emergency_Light
10 ай бұрын
Nice
@matrix2048
29 күн бұрын
Have you ever worked on a Honeywell Vista system before?
@nics-systems-electric
29 күн бұрын
No
@matrix2048
29 күн бұрын
@@nics-systems-electric Would you be interested in learning one someday?
@nics-systems-electric
29 күн бұрын
@@matrix2048 I use DSC
@matrix2048
29 күн бұрын
@@nics-systems-electric Okay then
@MikeD_5
24 күн бұрын
@@matrix2048Lol, DSC is quite popular in Canada
@JyKrp
9 ай бұрын
Sweet
@BesthanddryerakaWDA
9 ай бұрын
Is DSC an Ademco rebrand?
@MikeD_5
24 күн бұрын
Nope
@eetnaviation
2 ай бұрын
I thnik the EOL resistors should be from terminal to terminal not inline with the wire
@nics-systems-electric
2 ай бұрын
Yeah I've seen it done both ways shouldn't make a difference either way it's a normally closed loop that should be always getting the resistance
@thecomputergeek101
10 ай бұрын
I forget, does the actual keypad have a pir built in?
@nics-systems-electric
10 ай бұрын
No
@ArgoSAABArgoFireSecurityMan5
7 ай бұрын
Usually keypads have a motion sensor but it is only for backlighting the keypad.
@ObamnaSoda513
10 ай бұрын
Can u upload more interesting videos please i just want good content from a good youtuber 😊
@darksecrets874
8 ай бұрын
I use paradox dsc ids caddx fbii ademco silent night and texecom alarm systems
@MikeD_5
24 күн бұрын
Which one is your favourite? Also, isn’t Texecom only available in the UK/Europe?
@kylebruns7607
9 ай бұрын
Your a cool adult
@Catnap606
26 күн бұрын
I love you❤
@Gav376
10 ай бұрын
I just watch the one year old video yesterday😂
@SodiumInduction-hv
10 ай бұрын
Am I the first here? Also great video!!! Everyone should be subscribed to you!! Can I get a pin?
@marksmith-ew7ir
10 ай бұрын
if that was me i would add up all the wattage that the fire alarm and burgular alarm and placed power to these systems in a sealed room on a red fused spur like we have in the uk so you know these must not be switch of by accident a plug can al ways be pulled out if some thing fails on it . uk plugs are great as you have to pull striaght out if in a fused spur it will be hard wired where usa and canada plugs are easy to dislodge.
Пікірлер: 51