Biggest issue for me was the feet did not want to screw into the holes provided. They would start but the screw would twist inside the rubber foot. Finally got them on but the press was open and on and the heat plus the weight of it being open made it fall off the table. I had to use a ratchet strap to make sure it was secure. So far no other problems.
@laverngordon
Жыл бұрын
I am buying your 12x10 heat press off Amazon today. I wish it had the side rails like this one
@kindrahaase301
2 жыл бұрын
So where might I find replacement parts for my now stripped out machine... Let me just say that if better instructions for use were provided with the machine, I would not have the problem that I do right now.
@ladysmedleydesigns
3 жыл бұрын
Junk, my plug melted inside the heating power box!!! Couldn't return and can't get in touch with them, I had this machine for all of 3 weeks now I can't use it.
@cruzitaandangel3945
3 жыл бұрын
Why does my out keep turning off and on
@ladysmedleydesigns
3 жыл бұрын
this press is a mess! I had to go on Ebay to get a replacement power box because the plug melted inside of it. You can't leave it plugged into your outlet, when you're done using it you have to unplug. The swing away is top heavy so you will have to anchor it to something. Shame they don't advise you of all this when you purchase! smh
@BDCTEES718
3 жыл бұрын
I Have never taken mine apart but I think I'll try to make some hats this weekend
@elmotrickett7802
3 жыл бұрын
Is that time 180 C for 80 for any type of vinyl? Like is that set type for anything ?
@TheKelleennewell
Жыл бұрын
I cannot get my plate to unscrew either, I even purchased 2 hex’s and it will not work, any suggestions?
@SoothingSoundz22
3 жыл бұрын
Yeah mines is not making nothing stick.... I've tried changing the paper and uping the temp and its still not working. (The ceramic I'm talking about)
@ebonycunningham2584
4 жыл бұрын
I've barely used my heat press. I tried to turn it on today, but it wouldn't come on. How to I reach Seeutek?
@ebonycunningham2584
4 жыл бұрын
3 weeks later and still no response 😕.
@BHRU
4 жыл бұрын
Thanks for your help. Its better I run away. I wanted to buy one from them.
@AhparathYasharahla
3 жыл бұрын
The hex key won't turn so I can't change my attachments 🙄
@toniblanche683
3 жыл бұрын
I'm having the same issue!
@avianah
3 жыл бұрын
Stopped working after six months, zero way to contact them
@bmejia3593
3 жыл бұрын
How do we contact the company for replacmwnt parts!? My pressure bolt stripped after 2 months?!
@Laboricuamamys2002
3 жыл бұрын
I also need to contact the company but nothing so far left a message on Amazon that’s where I purchased from but I guess I’ll have to wait till some one gets back to me. I cord got to close to the heat plate and it melted
@kevinsherrill6853
3 жыл бұрын
Mine too - 3 months
@kkeri9788
4 жыл бұрын
SI ordered one of these heatpress’s off of amazon. I’m having an issue with it not staying in place when I swing it open. Like I feel like there was suppose to be some sort of suction or non slip for the bottom. Any recommendations on how I can secure my heatpress so it doesn’t topple over every time I swing it open. Someone HELP.
@christinae0156
4 жыл бұрын
I second that question!
@Corey_Cicidesigns23
4 жыл бұрын
Screw it down it has holes slide plate away
@jrchapman36
3 жыл бұрын
You need to attach it to a table with screws
@trainedtogobandttg677
3 жыл бұрын
Suction feet were in my box when it came
@theshamanshadow
4 жыл бұрын
@1:02 WHATS THIS HTV? WHAT KINDA PRINTER?
@carolporter7094
3 жыл бұрын
What kind of paper are you using for design?
@_2023Gabrielitoadventures
3 жыл бұрын
How you you get the image in color is that all vinyl or printed on a heat transfer
@tanyawalker3958
3 жыл бұрын
It looks like sublimation
@crystalsimmons2560
4 жыл бұрын
What kind of printable vinyl paper you used
@codydinsmore6273
3 жыл бұрын
iron on vinyls
@itsstephaniekrystal6188
3 жыл бұрын
my handle stopped raising and lowering the heating plate. Any advice?
@dw2108
Жыл бұрын
Mine bent the piece that connects the handle. Fixed that with new screws then the arm ( the black part) broke! I am strong but not that strong. Of course they apparently are out of business or changed business names. P
@gioflores96
3 жыл бұрын
How do you make this image?
@zhangleon5958
5 жыл бұрын
Great heat press machine:amzn.to/2Ihg91E
@elivega1025
3 жыл бұрын
my won’t heat up
@dkgeelhoed
3 жыл бұрын
mine either. returning to Amazon!
@dardarshark
4 жыл бұрын
Avoid this machine.
@jacquelynturner60
4 жыл бұрын
Is it a bad machine?
@dardarcook
4 жыл бұрын
@@jacquelynturner60 Mine came as an obvious return and wouldn't even power up. I had to return it.
@tarantang_ina1146
2 жыл бұрын
How did you return it?? I just got mine I tried making a shirt it just turned off..now it won't turn back on..please lmk...thanks
Пікірлер: 42