Arduino or NodeMCU will have a push switch attached. When I press in that switch, the location will go to our mobile
@AhmadLogs
2 жыл бұрын
ok
@ipflodhuri
14 күн бұрын
My question is that when esp send data update, whether existing data will be updated or will add new line in mysql. ?
@Lovely-bx8se
9 ай бұрын
Bonjour, Tous d'abord un grand merci pour ce tuto très complet précis accompagné en plus de l'ensemble des elements.Pour ce qui cherche, ne cherchez plus vous avez trouvé. J'avoue ne pas être un grand spécialiste et grâce a ce tuto j'ai put appliquer l'ensemble du projet ( avec un serveur LAMP ) sur un Raspberry. Merci !!!
@Lovely-bx8se
5 ай бұрын
Bonjour, J'ai essaye d'adapter votre code pour un capteur DS18B20 mais les valeurs ne change pas elle m'indique 24 et 77.
@tariq4846
2 жыл бұрын
How to display multiple sensors data on same page?
@mbinacedric3566
Жыл бұрын
Hi, i have a video topic for you!!!
@DomjohnPerez
Жыл бұрын
how to fix bad requests. response code 400. the file sensordata.php cant find HTTP request, btw im using hostinger as webhost
@AhmadLogs
Жыл бұрын
I thinks you did not upload the sensordata.php file at the correct location
@nonel7215
2 жыл бұрын
Thank you so much for this. I'm having issues with http.begin(client, SERVER_NAME); It gives error Compilation error: no matching function for call to 'HTTPClient::begin(WiFiClient&, const char*&)' I would appreciate if you can help
@AhmadLogs
2 жыл бұрын
install the esp8266 core version 2.6.0 or lower
@nonel7215
2 жыл бұрын
@@AhmadLogs thank you so much!
@kucingawak
Жыл бұрын
@@AhmadLogs I also get the same error but my esp board is currently version 2.4.0 how to fix it?
@ry0usama511
3 ай бұрын
Very simple and understandable guide. Thanks!
@syaduinotech3681
2 жыл бұрын
Thanks for sharing. I try already but fail to get the function. I am using personal website.. its so hard many creator using free..huhu. can you share video about own personal website. I try using randomnerdtutorial get the http code 300. Mind to help. Using the personal website. I did not know the host name.
@SAURABHKUMAR-py9or
2 жыл бұрын
Hi bro I did everything like u said. Database is getting data if we try to add fake data through post_data_test.php and nodemcu is also sending data successfully as it's showing http code 400 on serial monitor but it is not saving in database of the website if we check in database. Can you tell me the reason?plz
@AhmadLogs
2 жыл бұрын
http code 400 means the data is not sending successfully to the database. please post your full serial monitor output here.
@SAURABHKUMAR-py9or
2 жыл бұрын
@@AhmadLogs Connecting...........Connected to WiFi network with IP Address: ***********Temperature: 31.30Humidity: 39.20--------------------------temperature_data: api_key=hello world&temperature=31.30&humidity=39.20HTTP Response code: 400
@AhmadLogs
2 жыл бұрын
@@SAURABHKUMAR-py9or which web server you have used awardspace or any other
@tamapra57
2 жыл бұрын
If you could explain each PHP file that'd be great since im a beginner. Thanks!
@AhmadLogs
2 жыл бұрын
Noted!
@SUMALESHKA
Жыл бұрын
my serial monitor is not displaying anything
@emojiit362
2 жыл бұрын
We need to talk Can you check your email?
@Lovely-bx8se
9 ай бұрын
Je me permets de revenir vers vous pour une question,peut on rajouter la fonction MQTT a ce projet?Merci de votre reponse
@fakhriaidil3774
Жыл бұрын
why when it try to run the post_data_test.php ....it come out with error 404 page...i follow all the instruction
@AhmadLogs
Жыл бұрын
If you are getting a 404 error when trying to run the post_data_test.php script, it means that the server is not able to locate the script at the specified location. Make sure that the file is located in the correct directory on the server.
@rodiladriangaryck6488
Жыл бұрын
Can I use this code for esp32 as well?
@AhmadLogs
Жыл бұрын
not
@jeromebla5835
Жыл бұрын
You have to modify it. I run it on a esp32 with DHT20
@TechTrendsShameer
2 жыл бұрын
Hi Bro, How to change the maximum value in the gauge from 100 to any other higher value? Please help me.
@AITwo_co
2 жыл бұрын
please make a video on going live with jazzcash payment gateway...
@AhmadLogs
2 жыл бұрын
NOT POSSIBLE
@rikinurfalakhi8943
Жыл бұрын
i have followed your video and i found the https respone code is 400 not 200, what should i fix?
@AhmadLogs
Жыл бұрын
it means the page you are requesting is not found. just make sure you have properly uploaded the php file on the webserver
@virenrao82
2 жыл бұрын
monitor in showing http 200 code at nodemcu side, but data not available on php page. I am using infinity web hosting
@AhmadLogs
2 жыл бұрын
there are just two free web hostings that work with the project. 000webhost, and AwardSpace
@amirtelecom6898
2 жыл бұрын
Verry Nice ... Can this be used with SIM800l ?
@AhmadLogs
2 жыл бұрын
yes, it might be used
@annoorkhan4219
2 жыл бұрын
Nice ,I tested your projects and it worked perfect but now I need to control few LED from web page, so what I have to do ?do I have to use mqtt broker?
@AhmadLogs
2 жыл бұрын
I pefer to suggest mqtt broker
@TechnicalidEas07
2 жыл бұрын
Make GPS project GPS and push switch
@AhmadLogs
2 жыл бұрын
give me some details
@TechnicalidEas07
2 жыл бұрын
Arduino or NodeMCU will have a push switch attached. When I press in that switch, the location will go to our Mobile 📲
@kiritochanel2351
2 жыл бұрын
How to fix? : HTTP Response code: -1
@AhmadLogs
2 жыл бұрын
this is the issue with the free web-hosting. but this is not more frequent issue if occurs time to time. if you buy a hosting plan then the issue will solved forever.
@nattanon_mixx3657
2 жыл бұрын
i use localhost?
@AhmadLogs
2 жыл бұрын
@@nattanon_mixx3657 but I did not test it on local host. try http:localhost/yourproject http:127.0.0.1/yourproject. make sure not use https. (I am just talking about 's' in the https string)
@bektinurwanto
Жыл бұрын
If using localhost, can i use api key?
@AhmadLogs
Жыл бұрын
yes you can
@EasyOne
2 жыл бұрын
nice
@AhmadLogs
2 жыл бұрын
Thanks
@DiyintheGhetto
2 жыл бұрын
Hello, What happens if you have multiple sensors on multiple esp866. How can I do that within mysql to store and display them?
@AhmadLogs
2 жыл бұрын
then lot of changes are required. both in the sketch as well as php myql code
@DiyintheGhetto
2 жыл бұрын
@@AhmadLogs got you thank you.
@TechTrendsShameer
2 жыл бұрын
Hi bro. How to change the color of the gauge in the output. I tried in the script, but the color goes to blank
@AhmadLogs
2 жыл бұрын
I have used Google Gauge in this project. and the Google Gauge have limited colors only 3 red, green and blue. try this on line number 115 of index.php redColor: "rgba(198, 0, 0, 0.67)",
@TechTrendsShameer
2 жыл бұрын
@@AhmadLogs Ok bro. Thank you
@AhmadLogs
2 жыл бұрын
@@TechTrendsShameer so nice of you
@POTTIVENKATASAICHARANBEC
2 жыл бұрын
website is not working can u check it thanking you
@AhmadLogs
2 жыл бұрын
I have tested it and it is working fine.
@kamalkamel7559
2 жыл бұрын
very great project, how control devices, example relay and display temperature!!
@AhmadLogs
2 жыл бұрын
It is possible. but it required some research.
@JuddSalvacion
Жыл бұрын
thank you. so helpful vid
@AhmadLogs
Жыл бұрын
thanks
@mailtorameshhr
2 жыл бұрын
very nice project thank you and why it is giving error like #1226 - User '4071374_tempdb' has exceeded the 'max_connections_per_hour' resource (current value: 1500)
@AhmadLogs
2 жыл бұрын
this is because you are using free web hosting. you can send 1500 request in an hour using this hosting. for getting more you need to buy a web hosting plan
@mailtorameshhr
2 жыл бұрын
@@AhmadLogs thank you
@markludwig5805
2 жыл бұрын
Great video...good stuff. I had the same problem. Awardspace shut down my free account due to abuse. Problem appears to be config.php line 18 according to awardspace. Is there a way to fix or reduce the number of connections/hr????
@AhmadLogs
2 жыл бұрын
@@markludwig5805 you just need to buy premium plan.
@AhmadMehraGohar
2 жыл бұрын
very nice and professional best product
@AhmadLogs
2 жыл бұрын
Thanks
@katkatia9255
2 жыл бұрын
What can i modify if i use xamp ?
@AhmadLogs
2 жыл бұрын
I think you just need to change the URL. I mean change the website url to your locallhost project url. like localhost/your_project_name
@TechTrendsShameer
2 жыл бұрын
Good one bro. Shall I use your code for my videos? Any problem ?
@AhmadLogs
2 жыл бұрын
no problem. you might use. the code is free for all
@TechTrendsShameer
2 жыл бұрын
@@AhmadLogs thanks bro.
@AhmadLogs
2 жыл бұрын
@@TechTrendsShameer you are welcome
@yashagrawal3539
2 жыл бұрын
why am i getting the http 301 error? i have followed all the steps
@AhmadLogs
2 жыл бұрын
which hosting service you are using?
@yashagrawal3539
Жыл бұрын
@@AhmadLogs thank you for the reply. i have my site on the hostinger platform
@l3nnyraw901
Жыл бұрын
Im getting the same HTTP code (301). It means that you have a wrong link or so. I host my project too with hostinger. but there is already a wordpress Webpage in my files. So I had to rename the index.php file (wehre the html code is in) to index2.php. So maybe this causes the HTTP Code 301. But I cant find the place in the project files wehre i can link to the index2.php file. /// The "post_data_test.php" makes an entry in the DataBase and works fine but the esp8266 creates no entries. so I cant find the issue.
@joroxanborata3102
Жыл бұрын
sir is this working for hostinger cause my http code: -1
@AhmadLogs
Жыл бұрын
it must work
@persephone1571
Жыл бұрын
@@AhmadLogs same but there are no changes on the index page
@persephone1571
Жыл бұрын
@@AhmadLogs also can you help me send an email using php?
@rodiasgohoue6014
2 жыл бұрын
Ahmad logs plz help me. Im in trouble each time i tried to compile my code on esp8266 this error appear double free or corruption (out) signal: aborted Erreur de compilation pour la carte NodeMCU 0.9 (ESP-12 Module) do you know what this means?
@AhmadLogs
2 жыл бұрын
you just flash your esp device
@rodiasgohoue6014
2 жыл бұрын
@@AhmadLogs oki thanks i'll try it Can you give me mail . i'll chat there if need . Thanks
@rodiasgohoue6014
2 жыл бұрын
hello @@AhmadLogs
@rodiasgohoue6014
2 жыл бұрын
@@AhmadLogs I need your help Did you ever use esp8266-01 ?I want ti know how connect it to php server
@AhmadLogs
2 жыл бұрын
@@rodiasgohoue6014 Sorry I never used it before. there is a video on electronoobs channel in which he uses esp8266 for the same purpose
@ahsanejaz1743
2 жыл бұрын
i will wait for your response
@AhmadLogs
2 жыл бұрын
for what?
@abdiqadirmohamednor6101
2 жыл бұрын
Thank you so much you helped me deeply
@AhmadLogs
2 жыл бұрын
thanks
@rampage_xdit
2 жыл бұрын
You are the best
@AhmadLogs
2 жыл бұрын
thanks
@ahmedtaher4015
2 жыл бұрын
Verry nice
@AhmadLogs
2 жыл бұрын
Thanks
@shakerileiwat4341
2 жыл бұрын
Great project Thank you
@AhmadLogs
2 жыл бұрын
Glad you like it!
@rodiasgohoue6014
2 жыл бұрын
thanks for this tuto
@AhmadLogs
2 жыл бұрын
so nice of you
@rodiasgohoue6014
2 жыл бұрын
@@AhmadLogs i really like this tuto .Actually im working on how to send data to laravel mysql. Have you an idea to how display data through gauge
@AhmadLogs
2 жыл бұрын
@Rodias Gohoue laravel is a php framework. you need to convert all the php code to laravel. To work with laravel you need to learn basics of this framework for 1. inserting data in the database 2. displaying it on the web page in a nice format. I have used Google Gauge in the tutorial. and you can use the same with laravel. the same code will work for laravel that I have used at the end of the index.php file. there is a tag. and all the code for gauge in available within the tag. this is a java script code and you can use JavaScript with any web based programming language and framework.
Пікірлер: 109