That is a masterpiece. Separating silver and palladium is a true pain in the arm. I tried it several times - not your process - and I never got the Pd really clean.
@999DusanGoldrecovery
4 жыл бұрын
Exelent mate, you ar the master of refining universe!
@Baronstone
2 жыл бұрын
You could have just poured the silver solution into a container with some large pieces of copper pipe or copper plate in it. The silver would have cemented out on the copper leaving a blue copper solution behind. That copper then gets recovered by pouring it into a container containing iron pipes or plates for the copper to cement out on. Doing that takes more time, but it is a heck of a lot cheaper and the yield is the same
@gwater12345
9 ай бұрын
Your proposed method can not work properly. The ionization tendency is as follows. Cu(+0.34V) > Ag(+0.80V) > Pd(+0.92V) *Notes: H=0V It means Ag and Pd cements out simultaniously when you pour the Cu into the solution. May work properly if you drop the silver pieces into the solution instead of copper. (Needs experiment to confirm its)
@OwlTech333
9 ай бұрын
I’ve been told that it actually works (pd cements on silver)
@gwater12345
9 ай бұрын
@@OwlTech333 Thanks for your reply!
@armancarmanc5895
2 ай бұрын
@@OwlTech333Hello, can hydrazine be used in palladium precipitation?
@OwlTech333
2 ай бұрын
@armancarmanc5895 I think so, but never done it myself. IMHO formic acid is a safer option and much more available and affordable
@mahmmud980
4 жыл бұрын
Excellent work by a specialist.
@OwlTech333
4 жыл бұрын
Thank you!
@ManMountainMetals
4 жыл бұрын
Why don't all your beakers have OwlTech written on them? 😂😂😂
@frantiseklaluch6605
Жыл бұрын
OK then, sodium formate looks very neat and easy to prepare... I will give it a shot...
@wohali4099
4 жыл бұрын
Great video! Should sodium hydroxide also work instead of potassium hydroxide?
@OwlTech333
4 жыл бұрын
Wohali yes
@bitsofeverything8385
4 жыл бұрын
Well, since you mention it, I haven't found any tin recovery from acid, piling up pcb's here and wondering if i can just have them in acid bath till tin is dilluted then wash it with water and leave it aside for other treatments. I haven't found anything to then extract the tin, since it adds a lot of the weight of any pcb it would be good to know.
@TheRecho
4 жыл бұрын
You can put the pcb in hydrocloric acid, use a small platinum wire or some thing like that as a catalyst, heat on, and the tin will get dissolved. To get the tin out of the acid, use elektrolysis of the tincloride.
@asdwee4444
4 жыл бұрын
Thank's for this very usefull video.
@snehasischakraborty7748
4 жыл бұрын
Hello Owltech, i just want to know is it possible recover palladium from 50% scrap silver after dissolving that scrap silver into nitric acid?? And why not you using dmg to seperate palladium from silver nitrate??
@francois-pellier
4 жыл бұрын
Супер метода! Лрви лайк!
@OwlTech333
4 жыл бұрын
СПАСИБО!
@khanacknowledge7604
Жыл бұрын
Hi Louis, we have grams of palladium in solution .but we can't separate the palladium. We just collect gold and silver. What can we do!!?
@OwlTech333
Жыл бұрын
How do you know you have pd in solution?
@mt-wl6oh
2 жыл бұрын
You can use simply drop the copper metal into the solution instead of sodium formate to pricipitate the silver. Why would you use sodium formate?
@OwlTech333
2 жыл бұрын
cheaper, faster, easier to wash, better quality
@mimas165
4 жыл бұрын
OwlTech, why won't you precipitate silver chloride from the original nitrate solution and be left with dissolved palladium chloride?
@varadarajansundararaman9916
2 жыл бұрын
I think your idea is simple and better
@tarbabyify
3 жыл бұрын
What about separation from an ore sample? Crushed rocks containing palladium and nickel?
@FemiAnimashaunDroneFilms
6 ай бұрын
Thanks for sharing. This has really helped out.
@OwlTech333
6 ай бұрын
Glad it did!
@1959cba
3 ай бұрын
hello, what is the white crystals you add after pouring the liquid hidroxide?
@ahmedmahdi1849
Жыл бұрын
I don't like adding a base randomly to nutralize a solution the better way is to do a titration process
@angel_scraper6858
3 жыл бұрын
I can use NaOH instead of KOH?
@OwlTech333
3 жыл бұрын
yes
@АлександрКолесников-в3с
3 жыл бұрын
Интересный метод , только долго, и накладно, много реактивов, а за работу лайк!!!
@ЛевКуклин-й1й
4 жыл бұрын
Добрый день! В промежутке что добовлял в сухом виде?
@tambangamatir4783
Жыл бұрын
Sorry, I want to ask, isn't the palladium precipitate that you precipitated dissolved in hydrochloric acid, but why did you wash it with hydrochloric acid? please explain sir
@angel_scraper6858
3 жыл бұрын
This method serves to treat MLCC's?
@bazonis1gp
4 жыл бұрын
SUPER.!!
@SURFEAMORETERNO
4 жыл бұрын
Good job friend.
@OwlTech333
4 жыл бұрын
Thank you!
@gaggiouy
4 жыл бұрын
Hola.. como estas? viendo el video tengo algunas consultas-1 cuanto carbonato de calcio agrega al cloruro de paladio para subir el PH y a que PH esta apuntando conseguir?-2- Para formar el formiato de sodio a partir de Carbonato de sodio y acido Formico.. cual es la relacion de cada uno? se mezclan en forma solida o hay que hacer una disolucion ? Saludos y myuchas gracias Marcelo
@OwlTech333
4 жыл бұрын
1.) pH > 6 2.) a 200 ml de ácido fórmico, agregue 100 g de carbonato de sodio y luego agregue más ácido fórmico para alcanzar un pH de 4
@gaggiouy
4 жыл бұрын
@@OwlTech333 Muchas gracias por responder mi inquietud!! abrazo
@kiyanliyan2931
3 жыл бұрын
@@OwlTech333Hello Master Do you use the same formula for ascorbic acid and sodium carbonateAt 18:34 you said to increase the pH with sodium carbonate, but you did not say how much it should be؟
@santiagoleguizamog7482
2 жыл бұрын
Nesecito aprender cómo separar el paladio
@ZakariaShamma-bx9yx
18 күн бұрын
Itryed making silver nitrat and then add hidrocloric the silver peticipat as silver cloride wiht powder then turned it to silver oxide with lye then melted it how did you add hydrocloric to silver nitrat without turning it to silver cloryd wiht powder
@OwlTech333
18 күн бұрын
Did you watch the video?
@stevenliu-litop
Жыл бұрын
good😅😅
@hamguer3653
8 ай бұрын
Thanks for vidéo
@OwlTech333
8 ай бұрын
Thanks for watching!
@alpersaltos3082
Жыл бұрын
Hi , thank you for the video to increase the ph level with sodium carbonate (what ph level has to be achived) also after that you say (adding more ascorbic acid) in which process and aprx. How many grams need to be added and what after that the ph level has to be reached.thank you
@mimas165
4 жыл бұрын
Owl, how do you know the dissolving palladium with hydrochloric acid from silver and palladium oxides is complete?
@bedadiabderrezzak1488
2 жыл бұрын
Why you didn't use hcl to precipitate silver?
@mimas165
4 жыл бұрын
Great vid as well as the whole series. Thanks OwlTech!!!! How did you come across silver and palladium alloy? Edit: Oh, I see. Is it typical for relays, or is it particular kind that contains silver and palladium?
@OwlTech333
4 жыл бұрын
The silver palladium alloy was the result of MLCCs cupelling
@virgisst761
Жыл бұрын
Sodium hydroxide works as well?? Or only potasium hydroxide?
@OwlTech333
Жыл бұрын
NaOH works too
@privatedaNiel
3 жыл бұрын
just wondering, how do you handle/dispose of all the chemical byproducts/waste created during these processes?
@OwlTech333
3 жыл бұрын
“No such thing as waste, only resources..."
@mohsinali660
3 жыл бұрын
Good sir
@OwlTech333
3 жыл бұрын
Thank you sir!
@Sylvain_lx
3 жыл бұрын
Hi thank you for your video. Can i use sodium/potassium hydroxide if the solution contain copper ? And if i Use sodium formate to reduce silver nitrate but the solutions contain copper it's ok ?
@OwlTech333
3 жыл бұрын
Yes and yes I have video of reducing pure silver from silver nitrate solution heavily contaminated with copper
@nahitdemir9790
2 ай бұрын
@@OwlTech33325:56 25:59 25:59
@اکبرحسنی-ع1ص
2 жыл бұрын
سلام استاد برای رسوب از چی استفاده میکنند راهنمایی کنید ممنون میشم
@OwlTech333
2 жыл бұрын
کوه
@اکبرحسنی-ع1ص
2 жыл бұрын
چی
@اکبرحسنی-ع1ص
2 жыл бұрын
بخور یابو
@حبيحبي-و5ت
6 ай бұрын
احسنت فيديو رائع جدا
@gangiqorbani2657
3 жыл бұрын
با سلام خدمت شما دوست عزیز لطفا ازین ویدئو های آموزشی بازیافت پلاتین و طلا با ترجمه و یا زیرنویس فارسی بذارید تشکر
@agitagat8914
Жыл бұрын
Good job
@OwlTech333
Жыл бұрын
Thanks
@sukamto0820
4 жыл бұрын
Kalau bisa nama kimianya ditampilkan langsung dilayar berikut ukuranya...👍
@claudioxavier9417
3 жыл бұрын
O paládio e atraído pelo ima ? a prata sei que nao e, então depois do processo da para fazer a separação pelo ima
@dirceudepin7755
3 жыл бұрын
o paládio não pega no ímã
@حبيحبي-و5ت
3 ай бұрын
سلام عليكم ماهذا المرسب الذي رسبت بهي الذهب
@manoharmehendale1140
2 жыл бұрын
How to purify rhodium sponge.
@angel_scraper6858
3 жыл бұрын
Puedo usar NaOH en lugar de KOH?
@OwlTech333
3 жыл бұрын
yes
@3three485
4 жыл бұрын
Wow!
@merdaslian9606
3 жыл бұрын
Hello what should be the pH when you add sodium carbonate before formic acid?
@OwlTech333
3 жыл бұрын
1.5
@krisau24k3
3 жыл бұрын
how would you seperate silver and platinium?
@OwlTech333
3 жыл бұрын
Same way as silver and palladium
@krisau24k3
3 жыл бұрын
@@OwlTech333 thank you so pt reacts with hno3?
@OwlTech333
3 жыл бұрын
@@krisau24k3 yes if it's alloyed with silver Pt:Ag 1:9 or more than 9 parts silver
@krisau24k3
3 жыл бұрын
Thank you. What if I would have lead-silver-palladium-platinum in one bar? I would like to recover silver and platinum together with palladium, don’t need to separate them. Please answer King :)
@OwlTech333
3 жыл бұрын
@@krisau24k3 cupellation will remove the lead leaving only the prescious metals
@zafarazmi7599
4 жыл бұрын
Very long time back I m always waiting
@مصطفي-س9د1ر
2 жыл бұрын
اتمني ان يكون الفديومتوجم للعربيةللمشتركين علي الاقل
@matrix8287
3 жыл бұрын
Hola !! Por favor si puedes dar otro curso como extraer rudio de polvo ! Descubrie un Montana de toneladas de polvo que contiene rudio!! Pero no sabemos como extraerle del polvo ! Gracias
@OwlTech333
3 жыл бұрын
kzitem.info/news/bejne/qp1-uJWgapV5aHY
@wadebert4458
Жыл бұрын
Where are your gloves?!?! YIKES!
@أحمدمحمود-س7ي7ع
3 жыл бұрын
هل ممكن ترجمة بارك الله فيكم
@Edgar-tt3lf
3 жыл бұрын
Me olvidé de contar soy joyero
@ОлегЧистов-в4ю
4 жыл бұрын
Муравьиная чистая или разбавленная
@OwlTech333
4 жыл бұрын
чистая
@robsonrosendodeoliveira4918
3 жыл бұрын
Olá poderia passar seu contato para trocarmos experiências, grato.
@Дядя-п9с
2 ай бұрын
Фигня .. намутил намутил .. зачем так сложно ?
@georeveal3500
4 жыл бұрын
Nice video. Of course i give you Like and Subscribe
@unit5207
4 жыл бұрын
No russian lang..
@OwlTech333
4 жыл бұрын
теперь есть
@ХатабычСтарик-ц1м
3 жыл бұрын
Да ну нах, чё так можно?
@AtiTuran-zd2fr
9 ай бұрын
At tuzu cikar gumusu suz at sodium bi karbinat al paladiumu ne ugrasion bukadar be
@1972Russianwolf
7 ай бұрын
never drink the orange juice
@niculanicolaeofficial9114
2 жыл бұрын
Again one great video. One question, adind sodium carbonate until what ph? Or until clouding? Before adind Ascorbing Acid, thank you very much for all your knolege sharing with us..
@createvideo561
Жыл бұрын
You could have just hydrochloric acid to the nitrate solution and it would have gone the same
@OwlTech333
Жыл бұрын
I would have ended up with a pile of AgCl if I did that
@vedantverma9673
4 жыл бұрын
Can you please tell me what is best for gold recovery from CPU's, cupellation method or Aqua Regia method?
@OwlTech333
4 жыл бұрын
IMHO nothing beats the speed of pyrometallurgy
@rasimtumkaya7043
2 жыл бұрын
Just. a question. you told hydrocloric acid will dissolve palladium and the silver will not dissolve .up to here ok later palladium precipitated up to here ok later the precipitant washed with hydrocloric acid .in this time will palladıum dissolve
@OwlTech333
2 жыл бұрын
10:13 these are hydrated Pd oxides which I dissolved in concentrated HCl, and @23:03 I'm adding HCl to Pd metal not oxide
@alvaroantoniocabrera5949
3 жыл бұрын
Muy buena explicación. Felicidades
@stevennolan2675
4 жыл бұрын
You do cool stuff! 👍👏
@arte47
2 жыл бұрын
Hello...If you have a mix of Ag and Pd, why not first precipitate Silver with HCl and then doing your way with KOH/Formic?
@ahmedmahdi1849
Жыл бұрын
The problem is that there is extra HNO3 in the solution which stops percipitation
@arte47
Жыл бұрын
@@ahmedmahdi1849 Extra HNO3? Dont think extra HNO3 will avoid silver to precipitate.
@ahmedmahdi1849
Жыл бұрын
@@arte47 because when it try to percipitate the nitric and hydrochloric desolve it back to aqua regia If there is access of Hcl my be silver chloride percipitate
@hasantokgoz3069
2 жыл бұрын
Türkçe diline çevirimisiniz teşekürler kardeşim kolay gelsin usdam
@OwlTech333
2 жыл бұрын
hazır
@christopherleubner6633
Жыл бұрын
That is electrical contact alloy for electrical relays. A much easier way to do it is to put the solution in a rbf and distill off the excess nitric acid then when most of it is gone add distilled water enough to dissolve. Next heat and add salt water to it. The silver will precipitate as a white chloride and the palladium will stay as a mix of chlorides. The rest is simple reduction or eletrotwinning. Silver can be reduced to metal with hydrogen or methane. Also the silver purity from this method is extremely high 4N or better. The contact alloy is generally 90 to 95 percent silver balance is palladium and copper. 🤓
@MiguelSierra
4 жыл бұрын
Excelente.
@ilmarzeiger729
2 жыл бұрын
Wow! Is Master klass, very good OwlTech!👍🤗👍
@OwlTech333
2 жыл бұрын
Thanks! 😃
@armancarmanc5895
Ай бұрын
I could not melt the palladium platinum powder. It did not come together in the crucible. It was in the form of small dotted particles and was swelling where it was. It remained white and chalky. I could not melt it. @@OwlTech333
@OwlTech333
Ай бұрын
@@armancarmanc5895 usually pinch of borax helps, or compressing the powder beforehand
@armancarmanc5895
Ай бұрын
@@OwlTech333 I also added borax but it did not liquefy and collect as a single substance. It crystallized where it was and remained as small beads.
@armancarmanc5895
Ай бұрын
Exhaust conveyor I had removed it from the catalyst, palladium and platinum became bubbles at oxygen temperature but they did not come together. It hardens and hardens.
@faheemkhan-ij3dt
4 жыл бұрын
I'm gold palladium silver recovery full nowlige I'm big Rifaining
@nadeemhadi2838
4 жыл бұрын
Kia lehka hai Bhai
@faheemkhan-ij3dt
4 жыл бұрын
Mujhe sara kam aata hai ye sab
@nadeemhadi2838
4 жыл бұрын
Ap Khaaan se hoo Bhai
@nadeemhadi2838
4 жыл бұрын
Is video main isne kis main main see gold recover kia hai
@toolslover3645
3 жыл бұрын
Palladium recovery kaise karen
@radiodettv
4 жыл бұрын
Привет бро! Класс!! 😁👍👍👍👍
@OwlTech333
4 жыл бұрын
Спасибо!
@scott2296
2 жыл бұрын
This is some high tech shit here boy let me tell ya, Hahahahahahaha
@OwlTech333
2 жыл бұрын
Damn right!
@Edgar-tt3lf
3 жыл бұрын
También la manguera va colocado de un tambor con agua...?
@livniadonayfuelsaverreacto4800
4 жыл бұрын
I know that you want to get a big income from KZitem so you deliberately make the process run slow
@OwlTech333
3 жыл бұрын
You got me
@santiagoleguizamog7482
2 жыл бұрын
Como ago para pasar a español
@stewarthenderson2623
4 жыл бұрын
What components did you start with for the silver and palladium ??
@OwlTech333
4 жыл бұрын
MLCCs
@stewarthenderson2623
4 жыл бұрын
Thank you for replying.
@gaggiouy
3 жыл бұрын
Hola.. tengo una consulta.. si tengo nitrico con cobre y plata en solución... si le agrego el formato de sodio.. precipitaria solo la plta o también el cobre precipitaria? .. quebtecnica me aconsejaría? Muchas gracias
@7734682
2 жыл бұрын
Thanks
@OwlTech333
2 жыл бұрын
Welcome
@joandotel4576
Жыл бұрын
good teacher I have palladium and rhodium I want to know how I get it have a good material
@anisahemad6968
2 жыл бұрын
None of your videos are on rhodium recovery please sir a video
@konradthomas2135
4 жыл бұрын
Sehr schönes video.
@OwlTech333
4 жыл бұрын
Danke schön!
@antoniazamora5925
2 жыл бұрын
Por favor .Podría ser tan amable de poner los químicos que Vd.utilza en este proceso.Mucjisimas gracias.Recibabun cordial saludo
@luishernandez7022
Жыл бұрын
Deberían de poner eso en español no que solo unos entienden la demas gente que mira esto no o solo les interesan que miren el video.
@yakupyazc9147
3 жыл бұрын
Pd Hcl precipitated with sodium hydroxide is dissolved immediately. Well, Why is Pd precipitate precipitated by ascorbic acid not dissolved with Hcl? üstelik birkaç dakika da kaynatılıyor.
@OwlTech333
3 жыл бұрын
Pd precipitate precipitated with sodium hydroxide from palladium nitrate solution is palladium hydroxide which is soluble in HCl, and Pd precipitate precipitated with ascorbic acid is palladium metal
@yakupyazc9147
3 жыл бұрын
@@OwlTech333 vaayyy
@ОлегЧистов-в4ю
4 жыл бұрын
Добр день варёнка шока какое число пор?
@exivrus
4 жыл бұрын
размешивать ртутным термометром это мощно!
@goldmancash
2 жыл бұрын
Thank you so much! This sure looks like the safest route. I don’t like the idea of breathing chlorine gas. I just need to recover Palladium from Silver alloys.
Пікірлер: 180