dude omg is that THE machinewise Deylan? the one guy? he makes the medussy I think 🗿
@zacthefishy6036
4 ай бұрын
@@DJEyelessPyro fr????? i didn't know HE made the mmmmmedussy
@DJEyelessPyro
4 ай бұрын
@@zacthefishy6036 bruh 💀
@zacthefishy6036
4 ай бұрын
@@DJEyelessPyro 🙃🙃🙃🙃
@reviewforthetube6485
2 жыл бұрын
Not gonna lie the grind on that blade isn't bad at all kind of impressive for a clone but then again alot of these clone makers do good work due to where it's made and the machines they have. Then again as you stated this isn't actually a clone which is clear by the things they did in fact change.
@FaithDbd
Жыл бұрын
i have never seen a review that i can actually enjoy because of it being funny you earned a sub
@LuciferArc1
2 жыл бұрын
Theone is obsessed with pinless now. They made a chab mod pinless design base off the monarch pinless. Idk why theyre pushing pinless so hard
@jaideepgowda
2 жыл бұрын
Ikr
@thedimmadumdoughboy7347
2 жыл бұрын
Cheaper
@cantflipforship
2 жыл бұрын
Same reason JK does it: cheaper and easier assembly.
@thebitehandle360
2 жыл бұрын
I don't mind it as long as the tang nipple is similar to the Orca clone. I've been able to beat on it for a while and there's essentially no handle gap closing in.
@LuciferArc1
2 жыл бұрын
@@thebitehandle360 the orca tang is perfect. It's actually based more off of the bm42 tang in away. The monarch tang is a different story
@yarkinkyrie8947
2 жыл бұрын
Pls review the new Chab mod clone by theone. It’s an interesting knife and I really want to see how you rate it
@DJEyelessPyro
2 жыл бұрын
we'll see
@sloth9371
2 жыл бұрын
you know what’s funny i now have that 😂 i bought it off dopy
@MicahYT
7 ай бұрын
I had one, hands down best flipper I ever owned
@datedbalisong
2 жыл бұрын
nice SHerif clone
@splikzzz
2 жыл бұрын
bad vid pyro, bad c-c-cuz.... BAD i dunno anymore SERIF GO BRR. please hate on this comment Edit: can i cancel u
@DJEyelessPyro
2 жыл бұрын
ok
@prayedupon
2 жыл бұрын
Minecraft knife
@666.pastel
2 жыл бұрын
r u gonna review the new blade for the orca clone???
@DJEyelessPyro
2 жыл бұрын
nope
@anthonyaranda5832
2 жыл бұрын
If theone changes the texturing they could call it a original lmao
@hawaiianham8358
2 жыл бұрын
nice "clone", are you going to check out the baliplus tsunami V2?
@DJEyelessPyro
2 жыл бұрын
nope
@panickflips
2 жыл бұрын
prysma vs maryn lite?
@DJEyelessPyro
2 жыл бұрын
prysma 1000%
@nagood2
Жыл бұрын
How do you have so many balisongs? Especially a reaper???
@DJEyelessPyro
Жыл бұрын
a reaper isn't that high tier compared to the rest of the market lol, it's like $300-$350
@nagood2
Жыл бұрын
@@DJEyelessPyro where did you buy it?
@DJEyelessPyro
Жыл бұрын
@@nagood2 Instagram lol
@abekaminski2294
2 жыл бұрын
Those handles gonna slap
@DJEyelessPyro
2 жыл бұрын
monarch still lives, i see this doing the same
@xxxxxxx82736
2 жыл бұрын
Nah bro, the handle gap will maybe decrease vut not to the point where there is handle slap
@abekaminski2294
2 жыл бұрын
@@xxxxxxx82736 Really? I have been worried about it. Guess I'll see with the orca I ordered
@michaeljones8478
2 жыл бұрын
Can some help me what channel spacers will work on a stock b+ rep
@DJEyelessPyro
2 жыл бұрын
any spacer that works on a real rep, works on a baliplus rep
@michaeljones8478
2 жыл бұрын
@@DJEyelessPyro ok thanks bro
@jonathantheunacceptable4259
Жыл бұрын
When you reviewing the madko titanium?
@dr.fishman2342
2 жыл бұрын
that channel widening is disgusting. Also, do you know anybody who makes full channel g10 rep spacers
@DJEyelessPyro
2 жыл бұрын
mck balisong on Instagram, great dude
@dopyspast
2 жыл бұрын
Ay, DAS ME!
@dopyspast
2 жыл бұрын
that ending, top tier.. SWORDFISH GO VREEEEEUUUUUUUUM
@jaideepgowda
2 жыл бұрын
Lmfao
@balisongs_gibby
2 жыл бұрын
Pog
@uniseft_alchor
2 жыл бұрын
would you say the serif trainer clone is about the same quality as the baliplus NAMI V2, really want a trainer with a similar quality feel
@nathanburk8421
Жыл бұрын
How is dat reaper holding up and how do u rate it
@Vivid-tx3he
Жыл бұрын
what about the trainer version of this, have you tried it?
@ki__inn
2 жыл бұрын
Review the reaper
@februaryfive8294
2 жыл бұрын
I was gonna buy a baliplus rep but cant decide what blade design I should buy... can u give me some suggestions and which design to buy, appreciate it 😊
@DJEyelessPyro
2 жыл бұрын
as I said in the rep video, I prefer tanto, but it entirely depends on your preferences
@Lloyd_workshop
2 жыл бұрын
hallooo
@threadflipsok
2 жыл бұрын
finally !
@salimalhabsi57
2 жыл бұрын
Can you review the prysma by machinewise
@DJEyelessPyro
2 жыл бұрын
probably
@Moh_D
2 жыл бұрын
I really don’t like how it sounds + how do you do the side choker fan into the rev ladder 3:24 ._.
@DJEyelessPyro
2 жыл бұрын
fair, i like how it sounds, and i do it
@reviewforthetube6485
2 жыл бұрын
@@DJEyelessPyro lol I do it haha! Well there you go that's how!
@ClownBabyG-Zus
2 жыл бұрын
dang another "clone" I'd consider 🤔
@matteocd9609
2 жыл бұрын
Fr I can’t decide witch clone to get. Do u know witch one is the best
@matteocd9609
2 жыл бұрын
Or rather one you would recommend the most
@ClownBabyG-Zus
2 жыл бұрын
@@matteocd9609 I'm not too familiar with clones just what reviews of them say. the 3 I've heard the best things from is the monarch v2 the channel orca the brs CHAB the brs channel alpha beast is probably the most durable as a beater from what I've heard. change the hardware and it's just as good as the real thing from what I've heard.
@matteocd9609
2 жыл бұрын
@@ClownBabyG-Zus oh ok sounds goof
@matteocd9609
2 жыл бұрын
Good
@chrxmezz7915
2 жыл бұрын
Real prismsa or tsunami clone
@DJEyelessPyro
2 жыл бұрын
prysma
@prayedupon
2 жыл бұрын
That grand canyon looking channel tho
@DJEyelessPyro
2 жыл бұрын
never tap
@nateianovici5739
Жыл бұрын
Where’d you acquire the reaper?
@DJEyelessPyro
Жыл бұрын
insta secondary market, it's from black balisong, but I'm not sure if he makes them anymore
@stickface9910
2 жыл бұрын
have you ordered the embargo clone?
@DJEyelessPyro
2 жыл бұрын
nope
@BeholdABlackWolf
2 жыл бұрын
Mmm reminds me of the first Kraken clones
@DJEyelessPyro
2 жыл бұрын
but better lol
@BeholdABlackWolf
2 жыл бұрын
@@DJEyelessPyro yes,, those floaters in this new balis are the way.
@Nik-Dybdahl
2 жыл бұрын
they gotta get off the pinless design..
@mavie2687
2 жыл бұрын
I would have preferred at the very fucking least tang pins rather than pinless
@maouss9934
2 жыл бұрын
Zen pins better 100%
@DJEyelessPyro
2 жыл бұрын
i disagree
@maouss9934
2 жыл бұрын
@@DJEyelessPyro why? I cant see why, its not a critic just want to know why exactly
@SilenceUnspoken
2 жыл бұрын
@@maouss9934 Don’t think he likes tangs but I could be wrong on that
@mavie2687
2 жыл бұрын
I just said at the very least tang pins zen pins would be way better durability wise
@camdenmakenzie7431
2 жыл бұрын
does anyone know where to buy one
@Oscar-jp4wl
2 жыл бұрын
Aliexpress. I won't provide a link since I'm not a Google bot believe it or not
@DJEyelessPyro
2 жыл бұрын
@@Oscar-jp4wl based
@g405t
2 жыл бұрын
Dumb question here, what is handle drag when doing fans? When I fan the handle tends to drop on my krake trainer is that because the handle is heavier?
@DJEyelessPyro
2 жыл бұрын
it's not a question of handle weighing more, it's on where the weight is, weight distribution blah blah blah, handle drag is just the handle dropping while doing fans, leading to fans that aren't as clean, that's it. and yea, kraken trainers have bad weight distribution in the blade, so it's handle bias
@g405t
2 жыл бұрын
@@DJEyelessPyro thanks now i know!
@freesoup9673
2 жыл бұрын
@@g405t and knowing is half the battle
@Oscar-jp4wl
2 жыл бұрын
@@freesoup9673 G.I JOE!
@ClownBabyG-Zus
2 жыл бұрын
i mean I'd still go in on a blemished serif if i can land one
Пікірлер: 102