Chris, you didn't give any commentary at the end comparing the power tool v hand tool approach. What's up with that? How long did each method take, which did you prefer, challenges of each, and so on. Great video nonetheless.
@ThirdCoastCraftsman
6 жыл бұрын
Good point thats a missed opportunity for sure. I guess I got lazy there at the end after hours upon hours of editing and narration haha. This has taken me days on and off. I can tell you in a nut shell that I much more preferred the hand tool side. I honestly dont think it took me a significant amount of time longer. cutting the tenons and tongue on the table top was a breeze and very enjoyable, but plow the groove and boring out the tenons was definitely hard work. For me it is always more rewarding and enjoyable when I complete a task with hand tools, but there are certain things that powertools are worth using. For instance router out the groove was substaintially easier than plowing it with the plow plane haha. Ill try to remember to do that commentary next time! Thanks Hazem!
@metaspencer
6 жыл бұрын
My impression, from watching the video, was that both finished products worked out well ... so which approach one prefers would really be determined by the tools, skills, and how you want to spend your time working
@tommylee85
6 жыл бұрын
....and the amount of noise the neighbours can stand :)
@MadMulberry
6 жыл бұрын
And the amount of dust you can cope with. Mine's an attic workshop so dust is a problem. Dust extraction would be expensive, difficult and take a lot of already limited space. So hand tools are the way I've gone.
@michaelballinger6419
6 жыл бұрын
Thanks for the comparison video. I prefer hand tools these days but always find men standing around with comments like, "don't you like electricity", or "you would be finished in 20 minutes with power tools". Gets old pretty fast, it's nice to see someone proficient in both and to be honest sometimes a blend of the two is the handiest.
@kathyledesma6773
11 ай бұрын
I bought this for my friend for his birthday as we just moved into a new house and he finally has room for a workshop. The bench was very easy to set up kzitem.infoUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh They center support is a little difficult to snap in and out of place at first but at least then we know the bench is secure. It was a pleasant surprise when we saw it came with clamps. I apparently missed that in the description. My friend loves the versatility of the bench. Great starter bench for his workshop and easily transportable all over our property. I wish the bench was a little taller but the other features of the bench more than make up for that.
@karenjackson7128
4 ай бұрын
I'm a girl and a bit shy of power tools. But my past life in the Victorian times has led me to love furniture that was crafted this way, I like furniture that is sustainable and can be reused for centuries. Unlike the garbage today that gets thrown out in the trash. I searched this video because I found an antique draw leaf table missing its leaves, and it is built with breadboard ends. So.Now I am in search of some hand tools to try my hand at what you've done in this video, which is amazing and so much appreciated .
@tonymarrazzo354
6 жыл бұрын
I have always been a power tool junkie, but the older I get the more I appreciate hand tools and the old ways of doing things, and you gave me the drive to learn the old ways even more. You are a fine craftsman and I really enjoy your channel!
@ThirdCoastCraftsman
6 жыл бұрын
Thanks so much Tony. It is definitely a super rewarding experience for me when using hand tools and my own practiced skills to build something. It feels great when I am done.
@backpacker3421
5 жыл бұрын
I absolutely LOVE the hand tool vs. power tool format!!! Please do more like this. Not only do you get to see how to do both, but you can mix/match techniques depending on what you have in your shop to work with. Love it!
@waiakalulu3501
6 жыл бұрын
I hardly own any hand tools because of the skill and coordination required. I fully get the appreciation folks have for them and respect those who take the time. It's a lot quieter, which can make a big difference of you have children trying to sleep and stuff. Hats off to a super strong breadboard. Love the thought and engineering that went into it.
@ThirdCoastCraftsman
6 жыл бұрын
You should get yourself some more hand tools. They are a blast to use!
@TopGRuler
4 жыл бұрын
He who works with his hands is a laborer. He who works with his hands and his head is a craftsman. He who works with his hands and his head and his heart is an artist. St. Francis of Assisi” Thank you for your videos, you inspire me and I find them soooo relaxing. Thank you from Albania
@diwu1877
6 жыл бұрын
Square Hole Mortising Drill Bits are what you were looking for
@Funknwanker
3 жыл бұрын
Di Wu - Norm Abrams approves of this comment.
@joelferguson4089
2 жыл бұрын
That’s what I was thinking
@TheSMEAC
Жыл бұрын
He said “regular, affordable, power tools”…. I agree with the power mortiser and am saving for one myself, but even a decent quality one isn’t really regular and affordable IMO. What may work for some guys in a short term is a power mortise attachment for their pillar drill ~$200 for decent one with bits; just keep in mind that this is more of a solution for floor standing drills since table top pillar drills don’t have enough throw in the quill to have an effective mortiser. The table top pillar drill really hits its max effectiveness with a mortiser attachment in the 1/4” mortise range like in rail/stile cabinet and small furniture. Just my 2¢
@joequillun7790
4 жыл бұрын
Hand tools are for the true craftsman, and not only requires good tooling, but lots of talent from years of experience. Power tools are for quicker build times, and the quality of the job is determined by the builders efforts and accuracy in setting up the machinery correctly. Once this is done, electricity takes over. (Thank you Benjamin Franklin.). Thanks for a good video.
@baseballMMAgames
6 жыл бұрын
I know the video is a little older but I felt that I should comment. I think what you have done here really shows that whatever tools you have your disposal and you can afford are the right tools. Certain tools, power or handtools, are better for certain jobs. It was nice to see that you don’t have to necessarily be committed to one or the other and you can appreciate working with both. Great video.
@ThirdCoastCraftsman
6 жыл бұрын
Thanks Jeremy, thats definitely a point I want to make for people
@philipwalker16
3 жыл бұрын
I click like before watching every video because they are so well done.
@victorleger7
3 жыл бұрын
Very well explained. Thank you. I am presently building a harvest table & will be doing breadboard ends. Recently bought 5 Douglas fir doors from the early 1900’s that could have possibly ended up in the dumpster and repurposing the lumber. Anyone who has worked with today’s lumber cannot appreciate the high value of old growth trees from 100 years ago. You are a young man & already possess the fine qualities of a good woodworker and can only hone your skills even further. Your common sense approach to the discipline of wood & tools is a great example to anyone watching this video that wants to get done The proper way. Victor from Canada. .......thanks for your time & consideration.
@jeffmiller4168
5 жыл бұрын
Excited to see you using that little slick. I work at a small timber framing company, and we all carry 2” wide chisels and use them for anything we can. They can be monsters or persuasion tools
@WhiteLabWorkshop
4 жыл бұрын
A few years ago, I fumbled my way through the power tools version of breadboard ends. After watching you do it, I’m glad to see I didn’t do it completely wrong. But, it would have been nice to have you there to point out how I could have done better! Amazing job!
@TheLvillefan
4 жыл бұрын
I watch this video about every three months. Based on my KZitem search history it keeps popping up as a suggested video. A pure joy to watch. The hand tool side is my favorite and a big reason I’m converting over to using more hand tools in my shop over the power tools. Good call quitting your day job!! 👍🏻
@jah457
10 ай бұрын
Great plans! Building this table is Ash. Godspeed
@nitrojunkie22
4 жыл бұрын
I watched the whole video of you actually making that table. Sick, bro. Sick.
@bryanenglish3242
4 жыл бұрын
Awesome love watching u work,i see im not the only woodworker who lives in a subdivision with an HOA
@mrgoodtime87
6 жыл бұрын
I don't know what I like more, the way the table turned out or that B-E-A-UTIFUL GMC out front.....great videos bud...very helpful!
@ThirdCoastCraftsman
6 жыл бұрын
haha. yea I sure do like that truck. Unfortunately its in the body shop right now because some druck driver smashed it while it was parked on the street
@mrgoodtime87
6 жыл бұрын
Third Coast Craftsman Dang dude, sorry to hear that. Y'all catch the moron?
@BronkBuilt
6 жыл бұрын
Fantastic job and great explanation of the project.
@reisekeller6859
4 жыл бұрын
Masterfully done! A Craftsman knows how to wisely use both hand and power tools... GREAT example!
@custommetal8838
4 жыл бұрын
Chris, great video. This comment is late as the video was posted two years ago but to cut the mortises I use a forstner bit of the width I want and after the first plunge to depth, advance the board 1/8 in at a time the bit will cut just fine and when done the mortise only needs a chisel run over the surface in case of any stray fibers left. This worked fine for a 3/8 wide mortise. Needs to be done in a drill press set up with a 90 degree fence so the board is perpendicular to the wood and just needs to be moved along as needed. Also round over the ends of the tenon sides so I don't have to square the mortise ends. Thanx again
@Psychlist1972
6 жыл бұрын
Nice trick with the straight edge and the saw. Also a good reason to have one with a high angle handle/deep blade.
@hciv4005
3 жыл бұрын
I am a new subscriber and wanted to say I enjoy watching, you showing both hand tools and power tools is vary helpful seeing how I am just starting to get involved with woodworking and don't have a lot of either just a littel of both.
@johnw.peterson4311
6 жыл бұрын
Chris you are a real craftsman and a natural teacher. Great work sir.
@duaneshelato3686
4 жыл бұрын
In another life I worked for a high end furniture manufacturer. The place was 100 years old back then and I have never seen such a collection of craftsman in one place since. I was there for 3 years and got the wood working bug. The company went broke. Fast forward 40 years and three other careers, I'm semiretired and for the last 18 months I have been collecting tools and building a small work shop. I put the word out that I was taking orders and my daughter said she wants a large table for the 6 of them. My plan is to make a 1/2 scale table as practice first. I have your plans and I'll keep you posted.
@billmccaffrey1977
6 жыл бұрын
Great demo of making bread board ends with a variety of tools.
@ThirdCoastCraftsman
6 жыл бұрын
Thanks Bill much appreciated
@SeanSmith73
4 жыл бұрын
You sir, have ninja woodworking skills - beautiful work.
@alansimpson596
6 жыл бұрын
Greetings from Ireland. I'm a hobby woodworker and within the next few weeks, I'll be starting to make my first ever tabletop with breadboards. This video was just great and I picked up so many tips from it. I'm sure I'll be referring back to it often during my attempt. I'll be using Wych Elm which is very hard but beautiful. Many thanks.
@ThirdCoastCraftsman
6 жыл бұрын
Awesome Alan, I am glad you found the video helpful. hopefully you can send me pics on facebook or instagram once you get working on it!
@TheShelbyruss
6 жыл бұрын
You're an excellent carpenter with more patience than I have. Keep at it. Look forward to more.
@jsledmondson
Жыл бұрын
Just found this channel and instantly hooked
@tiananman
10 ай бұрын
I am in the process of making a table and I've looked at a million different breadboard options. One thing I'm considering is whether to leave the breadboard enclosed at least 3/4" or so on the ends, to prevent the board itself from warping away from the table end. The downside of course is that no one gets to see the edge joinery, and that it takes a little more work.
@skippylippy547
6 жыл бұрын
1. Love the chisel from the flea market 2. Love the backup board used while sawing. 3. Love the offset dowels to draw in the breadboard to the table top This is a wonderful video and I thank you for sharing your hours of VERY hard work with us! ^5
@ThirdCoastCraftsman
6 жыл бұрын
Thanks so much for the awesome message and kind words. I really appreciate it and am glad you like the video
@billcunningham361
6 жыл бұрын
Being an older, non trained, retired lineman who has patiently builds things, i loved how you built that one end with hand tools. i wish i could have had a dual trade because it would have been wood working. thanks
@lollandz
6 жыл бұрын
Nice video. I love the contrast between the noisy screaming power tools vs the sweet symphony of hand tools
@ThirdCoastCraftsman
6 жыл бұрын
Yes, its the exact reason I alway grab the hand tools if I can help it.
@edwh164
6 жыл бұрын
I watch a lot of videos on line, yours by far are the most professional I have seen. Done very well on all aspects. Very talented wood working skills and a joy to learn from. I just found you this morning and you have a new fan. I install hardwood flooring and I am always looking for a way to grow my skill sets. One of the hardest things I deal with on a daily basis is not being given enough time to do my job the way I would like as far as quality is concerned. I consider myself a perfectionist, a gift sometimes and a curse too, but that is how God wired me I guess. Thanks for the work put into video form for all of us to learn from. Ed
@ThirdCoastCraftsman
6 жыл бұрын
Wow, thank you very much for the kind words. I really appreciate that I love that you get some enjoyement out of them. I am totally the same way as far as being a perfectionist, and that can hurt your profits for sure as time is money and the longer you spend on a job the less you make. But I cannot sell someone something unless Im truly happy with it. But keep being a perfectionist sir, it means we sleep better at night knowing we did a job well done :)
@738polarbear
3 жыл бұрын
Best breadboard end techniques.
@grkuntzmd
3 жыл бұрын
Instead of using a chisel or spokeshave to whittle the ends of dowels, I keep a pencil sharpener in my tool box (for sharpening my pencils 🙂) and use it to trim the ends of the dowels. Works great!
@d1027j
5 жыл бұрын
I really enjoyed your narrated and step by step video. I get so tired of turning on a video and seeing it in high speed and no explanation of what and why they are doing something. Just a great video. Thanks so much. David
@airuiz2
5 жыл бұрын
We are not worthy!! Lol. Great job man. Your a great teacher!
@howardhagadorn9443
6 жыл бұрын
I think the finished product shows the craftsmanship involved regardless of what tools you use to accomplish it. I cringed when the router started plowing out the groove, the hand tools way was much quieter and seems like the way to go, but so so so much work. Pushing that plane sure makes your arms look good tho, maybe I need to do that more. I bought a camera to make videos a few years ago and still haven't figured out the process and I hear so many talk about the time it takes to edit etc. You've rapidly become my favorite woodworker. Great job as usual. Another fine video from my favorite woodworking team. Be sure to give Utz an attaboy from me.
@hardnox6655
6 жыл бұрын
Well done Chris. Those tenons look stout. Myself... I'm a hybrid woodworker and use both to get whatever task accomplished the fastest with the best results. I find that I use power tools during the day and then hand tools at night after I tire of the noise. That stated I get great pleasure from using scary sharp hand tools no matter what time of day. :)
@luxbuildinggroup
5 жыл бұрын
Hands down the best woodworker on KZitem!
@tinycuisine6544
3 жыл бұрын
That was a fantastic, clarifying and enjoyable watch. Thank you. Subscribed
@swervituredesigns952
6 жыл бұрын
Very good cinematography. Good approach to comparison, using a single item with two sides that allow comparison.
@ThirdCoastCraftsman
6 жыл бұрын
Thank you, I was hoping do both sides with a different approach on each side would make for a good videi.
@signmeupruss
6 жыл бұрын
Chris, This is wonderful. You expertly explain the breadboarding purposes, techniques and process. Thanks.
@ThirdCoastCraftsman
6 жыл бұрын
Thank you, the whole narration part has been a struggle for me, Im glad to hear I am on track haha.
@lorddelle
6 жыл бұрын
Just shows that there is still a need for hand tools in modern day woodworking. Amazing!
@2012Gathering
6 жыл бұрын
Great work! This has become one of my favorite channels over the past couple weeks. IMHO you sir are underexposed in the youtube woodworking world. I'll be sharing links in the future. Thanks you for your great work.
@ThirdCoastCraftsman
6 жыл бұрын
Wow Richard, thank you so much. That means a lot to me. I am glad you like the videos, and hopefully as time goes on and I put more stuff out there I will continue to grow. Comments like this really keeps me motivated so thank you!
@ltischendorf3213
6 жыл бұрын
You do beautiful work. Thanks for sharing.
@JimDockrellWatertone
6 жыл бұрын
The top looks wonderful.
@ThirdCoastCraftsman
6 жыл бұрын
Thank you Jim, I gotta agree, I am SUPER happy with how it turned out.
@WayWoodworking
6 жыл бұрын
Nice work. I once fixed breadboard ends before I learned of the movement that happens. So far the project is still intact. I flooded it with mineral oil, it seems to have a more stable moisture content. It is an island top cutting board basically.
@mikedisimile2478
3 жыл бұрын
Great job explaining everything thank you very much
@davidjennings9253
5 жыл бұрын
Hi Chris - Great video and fantastic workmanship. Its great to see someone using hand tools with such skill. I think you demonstrated that they are not really much slower than power tools but with so much more satisfaction. Love the draw bored dowels - I have just completed a new workbench with a laminated Bubinga top on a Mahogany base. I used draw bored oak dowels for the complete assembly and it is so solid. Keep up the great work - Dave
@armandocasasconcosas9651
6 жыл бұрын
good work, very handmade, which adds value to the piece.
@ThirdCoastCraftsman
6 жыл бұрын
Thanks Armando
@camillewing4507
4 жыл бұрын
Thank you so much for the thoughtful explanation of both. I was hesitant to try breadboard ends, but now feel confident I can do it. My table top is only 7/8" I think it should work with the proper calculations. Thanks again!
@Cyph3rHaxPalm
5 жыл бұрын
I enjoy watching stuff like that, give ppl new idea, that others don't know about!
@cristobalroman16
5 жыл бұрын
I normally don't commit but really enjoy watching your work man . 👍 & subscribe
@Ron-FabandBuild
4 жыл бұрын
Hey Chris, just revisiting this video on the breadboards and getting all the ideas in my head to do the same on a project in the near future. I will be taking the all hand tool approach myself as I have limited space in my rented one car garage. I want to thank you for all your videos and great content that you put out. As mentioned before, I am building many of my hand tools as well. I am looking into the bowl blank suggestion from before. As always awesome content.
@scottrobertson9788
2 жыл бұрын
Incredible work call mom came out looking fantastic! Super helpful seeing both methods as well, thanks for posting!
@jojodangernk
6 жыл бұрын
Für die deutschsprachigen Zuschauer: Wie nennt man diese Bread Board Ends auf Deutsch?? Leider bin ich bei Dr. Google nicht fündig geworden... To all the not german speaking viewers: I just asked how these Bread Board Ends are called in german :D To Third Coast Craftsman: Thanks for the video! It really helped me realizing an upcoming project for my uncle. :)
@ThirdCoastCraftsman
6 жыл бұрын
Thanks for the comment, i hope your project turned out good, let me know how it goes!
@loganchannel100
6 жыл бұрын
I just watched two of your videos and learned a tremendous amount on how these tables are made. Subscribed!!! An excellent table and fantastic video. I'm sure I'll be referencing your videos often as I plan on making a similar table from 100 year old tobacco barn timber.
@ThirdCoastCraftsman
6 жыл бұрын
Hey Michael, I am glad you found the videos and learned some stuff. Thanks for subscribing and good luck on your table!
@SmallWorkshopGuy
5 жыл бұрын
That was a great confirmation of everything I have studied about breadboards lately - great video. I don’t think Paul Sellers would find fault with anything.
@jkgkjgkijk
4 жыл бұрын
You took some shortcuts: brace and bit mortice work, fret saw tenon haunch, but hey it's still hand tool so it's working smarter. A lot of Paul sellers influence present and it came out great.
@KingsFineWoodworking
6 жыл бұрын
Impressive woodworking skills my friend.
@ThirdCoastCraftsman
6 жыл бұрын
Thanks bud. I definitely appreciate that coming from a fine woodworker as yourself!
@andycrews9927
5 жыл бұрын
One of the few videos that I have watched multiple times and enjoy. Thanks Chris
@JeepTherapy
6 жыл бұрын
Great job on the table. I don't own a brace or auger bits so don't feel bad about the drill. You use what you've got!
@adam_aronson
6 жыл бұрын
Thanks, Chris. I’ve seen these techniques before but something about the combination of your shots and voiceover gave me some new insights.
@ThirdCoastCraftsman
6 жыл бұрын
Hi Adam, thats awesome, im glad you were able to get something out of it!
@adam_aronson
6 жыл бұрын
By the way... surfing today I found this. Are you aware that you’re "Big In Japan"? kzitem.info/news/bejne/rKKJnKqrh2tkfYI
@ThirdCoastCraftsman
6 жыл бұрын
Adam Aronson oh my gosh! They stole my video!!! Haha thanks for letting me know!
@adam_aronson
6 жыл бұрын
I suppose that's a compliment. ;-)
@mathewanderson2400
5 жыл бұрын
I like the chamfered edges also. Gorgeous build!
@jimgeelan5949
6 жыл бұрын
Hi Chris Just found you and subscribe, here in England I do the very same work as you and I can't believe what a pleasure it is watching someone else doing it, this site is going to be my new past time keep up the great work mate and the laid back way you do it 🇺🇸🇬🇧
@ThirdCoastCraftsman
6 жыл бұрын
Thanks Jim. I agree I always LOVE watching woodworking videos, especially ones with lots of hand tools. Thanks for subscribing and the kind words!
@victorherreraguzman5014
5 жыл бұрын
You're highly underrated. Your work is amazing.
@marclapointe4471
6 жыл бұрын
Really good work, I like your quality of the video. Thanks
@jonathanolson4553
5 жыл бұрын
I came here trying to figure out what a bread board was. I stayed because of some awesome techniques and tips
@koryjames8361
6 жыл бұрын
Very well done. Absolutely gorgeous.
@ThirdCoastCraftsman
6 жыл бұрын
Thanks Kory!
@JiNKA
5 жыл бұрын
Best channel out there
@freel213
5 жыл бұрын
I scanned quickly and didn't see any comments but for the mortises in the breadboard you can use a mortising bit on your drill press. I have seen them from 1/8 1/4 and 1/2 (maybe even 3/8) inch bits. Depending on how wide your mortise is you might need to put a couple together to get the finished mortise.
@finnnoble4993
4 жыл бұрын
Multi cutters are always a good idea
@jasondubose84
5 жыл бұрын
Dude, excellent video! This is one of the best woodworking videos I’ve ever watched on KZitem!
@W4ABN
6 жыл бұрын
Something about hand-tools make it look more relaxing to do. I have very few power tools, but collecting some hand tools to get into some woodworking. Just feels right to me. ;-) Really nice work.
@brianlowe8285
6 жыл бұрын
dayum ..... you go boy ! that,s the stuff !...... great vid. !
@davidlong5340
6 жыл бұрын
Chris the tool you are looking for is called a chisel mortising bit. It attaches to the drill press to make the tendons.
@ThirdCoastCraftsman
6 жыл бұрын
Hi david, I have a smalled Jet hollow chisel mortising machine, but It wasnt big enough to accept that 6" board, I have not tried using one of those bits and attachments on the drill press. Do you know if the larger bits are 4" deep. I dont think the smaller 1/2' bit on my machine is 4" Thanks for the comment.
@davidlong5340
6 жыл бұрын
Chris I'm not sure about the lengths. I have seen them used on television programs like the New Yankee Workshop. Check with lowes or home depot. They sell those chisel bits.
@GeeksWoodShop
6 жыл бұрын
A really enjoyable comparison, lovely result. Nice, Chris!
@ThirdCoastCraftsman
6 жыл бұрын
Thank bud!
@robertcarey8243
6 жыл бұрын
Excellent video, wish I had come across it sooner, I am in the process of also building a HUGE oak table with breadboard ends and have struggled with the joint. I like the idea of chamfer the end to highlight the transition. keep making sawdust.
@ThirdCoastCraftsman
6 жыл бұрын
hey robert, thanks for the comment. Yes, it can definitely be a tricky joint for sure! I hope it turned out good for you!
@keithpovec6462
6 жыл бұрын
You asked about squaring up the mortises without a chisel, you can use an oscillating tool. The straight plunge cutters work fairly well and you can use an angle grinder to take them down to the width you need.
@madiradesign
6 жыл бұрын
Awesome video! Can’t wait for more!
@michaelrimmer2557
6 жыл бұрын
Great video, loved seing both methods, gives me options in the future.
@hungry_arch
6 жыл бұрын
One of the better breadboard and videos I've ever seen brother. Great job. Love the channel keep up the great
@ThirdCoastCraftsman
6 жыл бұрын
Thanks so much dave. That means a lot man!
@DylansDIYWorkshop
6 жыл бұрын
I've never heard of that type of joinery before... looks really interesting!
@ThirdCoastCraftsman
6 жыл бұрын
which type? drawboring or the breadboard?
@gerhardschjelderup1221
6 жыл бұрын
Great video and I'm happy I found your channel. I liked that you approached the task with different tools, not so much for comparison, but rather for its educative merit. Great to see how you can acheive the goal through different means :)
@ThirdCoastCraftsman
6 жыл бұрын
Thanks Gerhard. Yes I definitely want to make the point that different tasks in woodworking can be accomplished in many different ways. Some ways are more efficient, and some are more peaceful and less dangerous, but you can usually get a job done with basic tools
@johncalvertjr5242
6 жыл бұрын
Can't remember the last time I watched a 17 min video without fast forwarding, good work!
@ThirdCoastCraftsman
6 жыл бұрын
17 mins IS a long video for sure. Makes me happy that the content was engaging enough that you watched all of it. Im on the right track! :)
@glenpeacock8597
6 жыл бұрын
When drilling holes with your auger bit and power drillmove the drill up and down the drill bit cuts along its length and u then only need to trim corners square. But keep a good grip of drill because it likes to buck. Old mortice lock trick.
@royallhoffer7393
4 жыл бұрын
Loved the video. Thanks for sharing it.
@myvoodooisstrong
5 жыл бұрын
Beautiful work.
@stevesteves8915
6 жыл бұрын
Very organised work & excellent video - Thank you
@ThirdCoastCraftsman
6 жыл бұрын
Thank you steve I appreciate that!
@periodcraftsmen
6 жыл бұрын
Chris, Killer video! Well done.
@danielmiller2977
6 жыл бұрын
That was a lot of fun. Thanks. I've been a furniture maker for 30 yrs and it's always fun to hang out with other woodworkers in there shops and see there tools and stuff. Good job!
@ThirdCoastCraftsman
6 жыл бұрын
Thanks so much Daniel. A furniture maker for 30 years!? I sure wish I could come hang out in your shop, Id learn a ton!
@vjbartholomewb
6 жыл бұрын
DUDE! They sell a corner/mortise drill in boat building tools. It's a regular drill inside a square tube sharp at the bottom and it cuts the mortise corners perfectly as it drills.
@jamescampbell8380
6 жыл бұрын
Enjoyed this immensely. Thanks
@knownaigm
6 жыл бұрын
Great vid, awesome build, entertaining to watch, and I really appreciated your ability to clearly explain WHY you did what you did while you were doing it... that is SUPER helpful to newbies.
@robertwilliams8974
6 жыл бұрын
Well explained and enjoyable vid. Great to compare the two methods. Cheers, Rob.
@ThirdCoastCraftsman
6 жыл бұрын
Thanks Robert, Im glad you enjoyed the video!
@jamesbennett3253
5 жыл бұрын
I've only seen 2 of your videos, very practical, (subscribed 👍🏼) I've been a carpenter for about 30 yrs mainly in construction, just got my first workshop so devouring all the techniques I can for bench based woodwork, thank you for your thorough explanations, I do have an idea for a hand held mortise machine, when I've built a prototype I'll test it and maybe do a video, I'll keep you posted
@ThirdCoastCraftsman
5 жыл бұрын
Thanks so much. Glad you found and like the channel
Пікірлер: 631