Good stuff. As for you burning up the motors with the soldering gun. You used one big enough for heavy cable. So, of course it will get too hot. Over all....good build. Servo City has good stuff. Very cool shots.
@ronhals6390
8 жыл бұрын
Very gracious of you , thanks for sharing.
@JohnCantHike55Amorosano
8 жыл бұрын
No problem, thanks for watching.
@sonicbrush
7 жыл бұрын
My first design was similar to yours until i realized at mid-project that I want more than continuous travel of the camera carriage which is fine for daytime timelapse at fast shutter speeds. Night time sky timelapse and daytime water flow timelapse with ND filters that need at least 5-sec exposure require a shoot-move-shoot scheme, otherwise it's all a big blur. So I went with a continuous 360 servo for the carriage timing belt, a regular servo for the shutter remote clicker and a unipolar geared Nema17 stepper for panning while sliding. After endless coding trial and error with the Arduino, did I finally tame this beast. Now i can adjust how far it slides for each stop, click the shutter after sliding and panning and how long to wait (for shutter to finish) before it moves again. I do like your lightweight setup that you could take hiking since most waterfalls are not anywhere near a parking lot. Here's my waterflow timelapse, if you're curious. kzitem.info/news/bejne/1Juv3Hapr6KHimU Thanks for your video tutorial and your unselfish sharing of information.
@JohnCantHike55Amorosano
7 жыл бұрын
Great shots. I shoot my time lapses with video though, not still pictures. So, I don't have that problem you had with blur. That's the main reason you don't see any night lapses from me, although I'm going to start experimenting with that soon using the still pic method. I just won't use a slider for the night lapses and keep the camera stationary. Thanks for watching.
@DeHGhamEz
2 жыл бұрын
This one is actually accurate, thank you.
@nickbest2810
6 жыл бұрын
very nice
@adventureeast5103
8 жыл бұрын
Pretty cool idea man ..that little movement does add a lot to the shots! Nice!!
@JohnCantHike55Amorosano
8 жыл бұрын
That's what I thought, thanks.
@musicvideoemcee1
6 жыл бұрын
Got to give it to John... he has mastered the limited functionality of a GO PRO Highest quality short clip videos.combining time laps with slow motion I've ever seen After a few mountain range sunsets... :) it's all over... ( watch out for hikers ) Hope there is another level or step for him to take this to... excellent development John
@JohnCantHike55Amorosano
6 жыл бұрын
Thank you... I'm actually working on a completely different design that will be more compact.
@ehtcom
6 жыл бұрын
Hi John. Great work on your slider and videos. A little suggestion to save a little more weight. Loose the switch and just plug the battery directly to the motor for on/off, and flip it for reverse direction. Cheers, Earle.
@JohnCantHike55Amorosano
6 жыл бұрын
Way ahead of you, I did make that change. Shortly after the video came out it hit me to do exactly that and it works great. Thanks for the tip. ;)
@ehtcom
6 жыл бұрын
Good stuff.
@nicholasschultz8751
8 жыл бұрын
This is awesome I was just going to ask you to make this video. Thanks for making it.
@JohnCantHike55Amorosano
8 жыл бұрын
LOL... my pleasure.
@LittlePeterP
4 жыл бұрын
Bravo !!!!!
@jjmcwill2007
8 жыл бұрын
Really cool, and I like that you added footage at the end demonstrating its capabilities. How much setup/tear down is involved when you want to stop and set up a shot? Never having used one of these, I'm curious whether you break it completely down or carry it mostly assembled and hanging off your pack somehow.
@JohnCantHike55Amorosano
8 жыл бұрын
Thanks, yeah I carry it in the outside mesh pocket of the pack and just wrap a beanie around the feet so it doesn't tear my pack. I can pull it out and set it up in a few minutes. I never break it down b/c I'm using it throughout the day.
@marlinmiller6762
8 жыл бұрын
Your KZitem backpacking documentaries are excellent. I've watched them numerous times prior to hiking the T2W during July 2015. After viewing your Servo City Motorized Cam Slider tutorial, I didn't hear you mention any limit switches that shuts off the power thus preventing stalling the motor. Are you always near the slider prior to the camera reaching the other end? Thanks in advance,
@JohnCantHike55Amorosano
8 жыл бұрын
Thanks for watching. Yeah, I keep a close eye on it. if you let the motor stall at the end it will burn out, so I'm always around it. I could add a limit switch on there, but again this thing is all about weight.
@jimhenline4360
7 жыл бұрын
You said in your video that you would have a complete list of parts and pieces used for the slider construction. I did not see the list in this video.
@JohnCantHike55Amorosano
7 жыл бұрын
I believe I wrote it out in the video description. Servo City also keeps the parts list.
@bmort12753
8 жыл бұрын
55 did a fantastic job on my slider. I love it . thanks so much 55 !! look forward to your next journey.
@JohnCantHike55Amorosano
8 жыл бұрын
Thank bud... glad you're happy with it, enjoy!!
@jenshendriks9092
7 жыл бұрын
Dude, you don't need that module for slowing it down or speeding it up. Just put a potmeter in between the switch and the motor.
@JohnCantHike55Amorosano
7 жыл бұрын
Thought about doing that and using one motor, but the variable POT makes the sliding motion very inconsistent. The 2 gear motors with different speeds work perfect for what I need it for.
@DOM_4GOOD
6 жыл бұрын
wow !!! finally i WILL make my own slider !! thank you so much for all those information so well detailed.
@BentonQuest
8 жыл бұрын
Well being the anal person that I am I just ran all the part numbers you listed and came up with a grand total of $191.83, not including the feet from the kit or the bearings from PBC Linear. Prices are current as of 5 minutes ago. That is awesome for a low weight functional slider. The Non-Momentary Switch is currently out of stock. I also saw with the timing belt that 5 feet is 17.99 but you can purchase a pre-cut 10 footer for 14.99. Maybe save some costs and have a backup belt.
@JohnCantHike55Amorosano
8 жыл бұрын
You can buy the switch at any electronic store. Good idea for the belt.
@SummitSeeker546
8 жыл бұрын
Dude, love your passion for videoing your outdoor adventures! It clear.y shows in the quality of your videos. That's why we follow you...Thx for sharing!
@JohnCantHike55Amorosano
8 жыл бұрын
Thanks bud, I just love to hike and show people what I see out there and the emotions I go through while in those moments. With some added time lapse slider shots of course... LOL
@JeremyY
6 жыл бұрын
This is fantastic- thank you for sharing! How much did the build end up costing you?
@JohnCantHike55Amorosano
6 жыл бұрын
Thanks... I thinks it's around $250 including all the shipping.
@TheTSFChannel
7 жыл бұрын
Hah! Just what I was going to ask you after your last film.
@JohnCantHike55Amorosano
7 жыл бұрын
LOL...
@Military872
7 жыл бұрын
Another great video, what did it cost to build?
@JohnCantHike55Amorosano
7 жыл бұрын
The parts cost around $300
@STinGa157
8 жыл бұрын
John,Thanks for sharing the video and your slider. Like the others have said, two feet of movement doesn't sound like much, but it really adds a nice touch.Tom
@JohnCantHike55Amorosano
8 жыл бұрын
Yes, it really does add a dynamic element to the shot. Thanks for watching.
@HuckOutdoors
8 жыл бұрын
that slider is awesome!
@JohnCantHike55Amorosano
8 жыл бұрын
Thanks bud...
@BackpackingBen
8 жыл бұрын
Thank you, thank you, thank you! Thanks for making this video John!
@JohnCantHike55Amorosano
8 жыл бұрын
No problem, good luck with it.
@marlinmiller6762
8 жыл бұрын
I'm building a slider based on your design substituting 1/2" rigid copper tubing in lieu of carbon fiber. I may purchase the carbon fiber tubing at a later date. At 9:09 of your video, I noticed you offset the linear bearings. Does this help stabilize the flat triple channel bracket since the bearings are spread over a longer distance? Also, did you apply any Loctite to the screws during final assembly? Once again, thanks in advance.
@JohnCantHike55Amorosano
8 жыл бұрын
Awesome... The only reason the bearings are offset is b/c of the hole patterns on the triple channel bracket. They don't allow for the parallel clamp that holds the bearing to be mounted exactly in the center, so I just went to opposite sides of center for no particular reason. I did not use any Loctite, the screws stay pretty tight on their own. There's not a lot of vibration going on while the slider is in motion, so really no need for it. Good luck with your build.
@dalewhisler8949
8 жыл бұрын
Hey John awesome vide once again .. I would be very interested in a slider anyway we could talk $$ to build one .. Thanks
@JohnCantHike55Amorosano
8 жыл бұрын
Yeah sure... email at hiker5150@gmail.
@BikerNic
6 жыл бұрын
Just beautiful shots those.....
@warrenlewis7540
7 жыл бұрын
Nice design. Did you look at the FL (Inch) Closed PTFE Coated Self-lubricating linear bearing offered by pbclinear.com? It is made of alum and lacks the balls. Just wondered about it being a better choice for dust and water on the trail. Is your design easy to take apart for a smaller pack size while on the trail?
@JohnCantHike55Amorosano
7 жыл бұрын
Thanks... I actually did use a similar bearing at 1st, but it didn't slide as smoothly as the ball type. The dust from the trail builds up and kind of makes it jumpy. I have now taken this design on a ton of long hikes and it's still rolling smooth. I'm in the process of designing a new slider that will be more packable and lighter... stay tuned!!
@TRUUTAH60559
8 жыл бұрын
Very interested in building one of these, would it be possible for a parts list from servo? Love your videos also btw
@JohnCantHike55Amorosano
8 жыл бұрын
Thanks... Servo City has the parts list on file for this slider. Just give them a call and ask for Shanna. Let her know you want to build this slider and she'll be happy to help you out.
@TRUUTAH60559
7 жыл бұрын
awesome thanks man
@lizavila9451
8 жыл бұрын
Great video. Do you have an exact weight on this?
@JohnCantHike55Amorosano
8 жыл бұрын
Not exact, but I know it's around a pound.
@newt2010
4 жыл бұрын
Did you put over travel limit switches on to turn itself off at the end of travel?
@JohnCantHike55Amorosano
4 жыл бұрын
No... too much weight. LOL
@newt2010
4 жыл бұрын
??? Too much weight? Funny
@ashleycurtis5261
7 жыл бұрын
Is it possible to attach it to a tripod?
@JohnCantHike55Amorosano
7 жыл бұрын
Yeah, there's a way to add the proper parts to make it possible, but not as this one is.
@destro513
7 жыл бұрын
john whould this take a dlsr rig with mic and lights?
@JohnCantHike55Amorosano
7 жыл бұрын
It will hold a DSLR no problem, but not sure how much more equipment beyond the weight of that it can take.
@AMGTOUGEX
7 жыл бұрын
good build
@TimSeymour
8 жыл бұрын
Thanks for posting! The shots are really sweet-pretty remarkable for only 2 feet of travel. Looks like much more. How do you carry it on your pack? Do you have to protect the switch and motor from the rain? Have you traveled by air with it? Good work!
@JohnCantHike55Amorosano
8 жыл бұрын
Hi Tim, thanks... I haven't traveled by air with it yet. If I did I would pack it up in a box really good. While hiking with it, I pack it down in the mesh pocket on the outside and wrap a beanie around the legs and switch so it won't tear a hole in the pack. If it were to rain I would just cover the switch and motor end with a 1 gallon size baggie.
@TimSeymour
8 жыл бұрын
Does the motor shut off if it reaches the end of the slider and hits resistance or do you have to make sure you turn off the motor before it hits the end? Thanks!
@JohnCantHike55Amorosano
8 жыл бұрын
If you don't install a limit switch at the end the motor will stall and burn out, so you have to keep a good eye on it. I didn't add a limit switch to mine b/c it's extra weight.
@daboss59
3 жыл бұрын
Good Day What are your fees to build Just the motor i have a Slider already?
@JohnCantHike55Amorosano
3 жыл бұрын
I don't build these anymore.
@BentonQuest
8 жыл бұрын
Great demo John, thanks for posting. I only have one question though...what'd you get in the mail package in the background? :D
@JohnCantHike55Amorosano
8 жыл бұрын
We're moving, so it's just a box my wife used.
@peterpreisdinslaken1510
7 жыл бұрын
Top Aufnahmen gefällt mir. Lg.Pidi
@milkingstoolpatrik1908
7 жыл бұрын
15 minutes for sliding in timelapse? isn't that to fast?
@JohnCantHike55Amorosano
7 жыл бұрын
Watch the footage... you tell me. It all depends on what kind of time lapse you're shooting. Moving clouds are great... if you're trying to catch the sun, then no. I'm limited to what weight I want I carry into the backcountry.
@milkingstoolpatrik1908
7 жыл бұрын
+John +John “Can't Hike 55” Amorosano okay thanks thats a great project! slower speed would be possible with a speed-controll like in your first project?
@JohnCantHike55Amorosano
7 жыл бұрын
Patrik Senn Again, the speed controller is a lot of weight. It's all about weight vs. footage. I could double the time to 30 minutes by carrying an extra .5 RPM motor, which is a lot less weight than the speed controller. I haven't really found myself needing more than 15 minutes for a time lapse in the back country though, so it works for my applications.
@milkingstoolpatrik1908
7 жыл бұрын
okay thank you :) !
@AMGTOUGEX
7 жыл бұрын
good video boss! gave me ideas. I want to incorporate your ideas with some others. basically be capable of mounting on tripod. great footage at the end. 1. what exact product number should I look for in linear bearings. they have a store on ebay but I can't find the bearings. 2. that 9 volt and motor strong enough for powering a dslr on an incline? thank you sir!
@JohnCantHike55Amorosano
7 жыл бұрын
Thanks... the bearings are from pbclinear.com and the model# is IP8G. This slider will handle a DSLR no problem. There will be shake in windy conditions though.
@TrailAndMountain
8 жыл бұрын
Hey John, Great video! Whats the total parts cost and build price? If it's reasonable I just might have you build me one lol
@JohnCantHike55Amorosano
8 жыл бұрын
Thanks, I can build you one for around $350 plus S&H.
@TrailAndMountain
8 жыл бұрын
Hmmm, Maybe lol. I might just try it myself 8-)
@JohnCantHike55Amorosano
8 жыл бұрын
Good luck, let me know if you need anything.
@TrailAndMountain
8 жыл бұрын
Will do!
@davidbon6847
6 жыл бұрын
Killer Video,,,was that all done with a GoPro,,,what GoPro was used ???
Пікірлер: 92