Hello! Towards the end, you showed a linear device mechanism. Is there a tutorial on how to make that exact same mechanism? Including whatever PCBs you used.
@SwarthySkinnedOne
7 жыл бұрын
Goddamn! You made them lil nuts spin 'n spiral on that rod all the way down to Earth from where it started!? Nearly incredible! That's what I call smooooth as Johnny Walker Black Label!! Gotta have been some voodoo going on behind that!
@marccenter4012
8 жыл бұрын
Can you create a Bill of Design (BOD) for this mechanism to insure ordering accuracy for us FTC coaches?
@asid61
8 жыл бұрын
Beautiful, I thought it was only a matter of time before these got added! I want to see an Actobotics 3D printer using these. :P
@alphab5543
7 жыл бұрын
hi, i would like to know if the parts listed above are exactly what is needed to build the presented kit? thanks
@jamescullins2709
2 жыл бұрын
Good video. Good prices as well. I want to use them in a core XY 3d printer.
@RANJEETSINGH-yb2kw
2 жыл бұрын
So can i mount more components on 1 single lead screw and move them linearly individually?
@mkvmk1372
7 жыл бұрын
the above ServoCity Products: Lead Screws and Nuts vedios, you had shown the complete assembly , please advice the complete part numbers, would like to purchase as a set including your controller
@wallyflames4
8 жыл бұрын
Can you use one of the HiTec servos to control the lead screw? If so, what can I use to connect the lead screw to the servo?
@ServoCity
8 жыл бұрын
Keep in mind servos typically rotate about 180 in stock form. If you use the HS-785HB servo or a continuous rotation servo then you could drive the lead-screw multiple turns. To connect a lead-screw to a 24T servo spline you could use a servo horn that has the .77” hub pattern and then attach an 8mm clamping hub to it using 6-32 x 3/8” socket head screws. www.servocity.com/standard-hub-horns www.servocity.com/770-clamping-hubs#348=105 Please let us know should you have any additional questions tech@servocity.com 620.221.0123
@flogrips5101
7 жыл бұрын
Could this be used to rotate in place?
@Jworth-kc4qc
8 жыл бұрын
what rpm motor is that? Also, are there any plans to come out with conveyor belt kits?
@ServoCity
8 жыл бұрын
Hi, James we apologize for the delay. The motor is 313 rpm Premium Planetary Gear Motor www.servocity.com/313-rpm-hd-premium-planetary-gear-motor. We have many of the components necessary to build a conveyor system but don not have plans for a kit in the near future. We'd be happy to help you select the necessary parts should you want. Feel free to contact us at tech@servocity.com or 620.221.0123. Thank you!
@Duriel1000
4 жыл бұрын
I need to create an up/down platform. what are all my options?
@ServoCity
4 жыл бұрын
That's a little too broad for us to dive into without knowing more about your end goal. Please email tech@servocity and we'd be glad to help. If you have more details on what you want to build, please include them. Pictures help if you're mimicking a particular setup that you've seen. Thank you
@michaelzajac5284
8 жыл бұрын
Use AutoCAD and NX 10?
@MrDqpmt37
7 жыл бұрын
What would be the load capacity on a conveyor setup like this, if the rod was 24 inch?
@ServoCity
7 жыл бұрын
The length of the rod won't determine the load capacity, it's more about the torque of the motor, the orientation of the load applied and the number of v-wheels you have supporting the load. Feel free to email tech@servocity.com with additional questions!
@danielalejandrorivasgalind577
6 жыл бұрын
Mr Brian, I would like to know which planetary motor (RPM) are you using there, please? Thanks
@ServoCity
6 жыл бұрын
Hi Daniel, unfortunately we can't remember 100%, but we would guess it to possibly be the 313 RPM Heavy Duty Planetary Gear Motor www.servocity.com/motors-actuators/gear-motors/heavy-duty-gear-motors/premium-planetary-gear-motors. Please let us know should you have any additional questions tech@servocity.com.
@carloszenteno
5 жыл бұрын
Yep, according to a previous response in the comments, that was it.
@FullFledged2010
5 жыл бұрын
Will these wear out fast when they push a load of about 30kg ?
@ServoCity
5 жыл бұрын
There are quite a few unknowns that will change the outcome. Brass on a stainless lead screw runs smooth, but we recommend you lubricate the lead screw with lithium grease to reduce friction. This will greatly increase longevity. Let us know should you have any other questions tech@servocity.com.
@RobertShaverOfAustin
8 жыл бұрын
How did you support the free end of the lead screw?
@ServoCity
8 жыл бұрын
With a 8mm Bore Side Tapped Pillow Block (535094). Please let us know should you have any additional questions! tech@servocity.com
@gelatinskeleton8745
Жыл бұрын
Would this be capable of moving up and down vertically while carrying some weight?
@noonbreak5359
5 жыл бұрын
sir..what controller did you use for inverse and reverse? tnx
@ServoCity
5 жыл бұрын
The controller used in this video is the Digital Manual Speed Controller. www.servocity.com/digital-manual-speed-controller Let us know should you have any other questions tech@servocity.com.
@avcomth
6 жыл бұрын
Your motor also needs gears and brakes otherwise that contraption is not precisely driven because I see lots of inertia motion here :D
@dwisiswanto2574
4 жыл бұрын
where is we can buy it??
@ServoCity
4 жыл бұрын
You can purchase them via our website. www.servocity.com/motion-components/linear-motion/leadscrews
@mark8driver
5 жыл бұрын
What’s the static load capacity?
@ServoCity
5 жыл бұрын
Static load capacity is dependent on the lead screw nut length. Feel free to contact our Tech Team at tech@servocity.com with your project specifics and they would be glad to assist in answering any other questions you might have.
@mkvmk1372
7 жыл бұрын
Dear sir, refer to below request( the above ServoCity Products: Lead Screws and Nuts vedios, you had shown the complete assembly , please advice the complete part numbers, would like to purchase as a set including your controller) REPLY ,we had email 2 times in below mails , no response , can you please help me out to get the complete assembly part numbers , hence shall proceed with purchase
@chychywoohoo
7 жыл бұрын
just figure it out by looking at their website
@ServoCity
7 жыл бұрын
Hi Murali, our Tech Team sent you an email with your parts list. If you have any other questions feel free to contact them directly. Thank you
@YaseminTheBest
4 жыл бұрын
@@ServoCity Hi, I am also interested in purchasing the whole set. Could I get a list of all parts from the assembly shown in the last part of the video?
@ServoCity
4 жыл бұрын
@@YaseminTheBest the full parts list is included under the show more in the description. Please let us know if you have any further questions.
@YaseminTheBest
4 жыл бұрын
@@ServoCity Thank you! Do you ship worldwide?
@norahung588
5 жыл бұрын
Would you have any interest to buy high quality ball screw nut or shaft from Taiwan or China? How may I help you? Any complain from your customer and lack of good supplier to offer ball screw nut or shaft? How may I help you? A ball screw is the kind of high-tech product that requires capital-intensive, technology-intensive as well as management-intensive input. Wei Tai owns some of the most advanced manufacturing and inspection instruments, which are used to maintain high standards.
@norahung588
5 жыл бұрын
Capabilities of Shen-Han Technology - . Ball screws and screw nuts in customized specific standards . High lead ball screws and screw nuts (1204, 1210, 1220 ,1606 1616, 1632, 2505, 2550, 2440, 2020, 2040, 2525, 4040 5050 etc.) 0601 0606 0801 0802 082.5 0808 0810 etc. Only our factory has produced in China. Wei Tai Transmission Limited Company is the head office in Taipei and acts for all of international trade activities to handle the shipment supplied from Shen-Han Shenzhen factory. We are looking for the new customers in your regions and it’s thankful if you can give us a chance to work together with. Please feel free to contact the following: Wei Tai Transmission Limited Company Email: 02weitai.ltd@gmail.com We chat ID: w0978377508 You tube: kzitem.info/news/bejne/jm6hqIqDbXx0dZw kzitem.info/news/bejne/y4eNmGd4sWdqioY Website: www.weitaitw.com/en/ball-screw-nut.html www.weitaitransmission.com FB: facebook.com/hung.nora.3 Cell phone: +886978377508 Address: No. 214-3, Zhou Mei Street, Bei Tou District, Taipei, Taiwan, R.O.C. Tel# 886-2-2832677 FAX:886-2-28327852
Пікірлер: 45