What settings do you use? Are there any other tips you would like to know? Let us know in the comments below! 🛴SEE NAMI BURN-E 2 🛴 : geni.us/AbeVr7Q?track=yt
@ralfhalbknapp1104
2 жыл бұрын
One tip is to set all the lower settings startup speed of the motors to 5. Without this as default the lower modes start painfully slow which does not have to be the case at all. Motor Power settings remain the same. Additionally I use maximum ebrakes that is compared to other Scooters only "medium" in strength anyway.
@armandosoto2631
2 жыл бұрын
What kind of security alarm do you recommend? I just bought a nami burne e2 I will appreciate.
@rengawr7734
2 жыл бұрын
I don't know why I watched the entire video when I don't even own a Burn-E
@ESG-ElectricScooterGuide
2 жыл бұрын
Haha
@revolutionaries007
2 жыл бұрын
Cause deep down u know u want one ;p
@edgarjesus2593
2 жыл бұрын
Maybe its because you dream of having one lool like me.
@pmarsalli
2 жыл бұрын
The best explanation online for the neophyte. Thanks, Paul!
@ESG-ElectricScooterGuide
2 жыл бұрын
Awesome! Thanks for watching.
@dcmackintosh
2 жыл бұрын
The adjustment knobs aren't labeled incorrectly. F means open valve for Fast rebound (not firm) and S means closed valve for Slow rebound (not soft). Good tips otherwise!
@ESG-ElectricScooterGuide
2 жыл бұрын
Thanks for watching! -Vosk
@mariorock76
Жыл бұрын
You're right. I've been mountain biking for a long time, and that's exactly it. By turning the red button to the right, we feel the button become firmer, and we see the button go inward to close the valve.
@ralfhalbknapp1104
2 жыл бұрын
I don't think the adjustment red knob of the suspension is labled backwards. It is the rebound and can be adjusted FAST or SLOW. It is not firm or soft ;-)
@ESG-ElectricScooterGuide
2 жыл бұрын
Thanks for the feedback -Vosk
@ElectricCommuter
2 жыл бұрын
Hi Ralf, the Nami Burn-e is a great scooter. Thanks for letting me try your Nami Burn-e. What an experience.
@elliotalderson9945
2 жыл бұрын
as much as i love dualtron, i cannot deny i keep watching Nami reviews since the V1 its getting me interested because of the water resistance IP55 rating, which means i will need not to worry using it on any weather conditions , Nami would be bad ass if will use a squarewave controllers, the humming sound on a dualtron when i pull the throttle is so addictive to my ears , i wish Nami will have dat bad ass iconic sounds too
@ESG-ElectricScooterGuide
2 жыл бұрын
Both are awesome and Nami is definitely a great scooter and build -Vosk
@zztop7000
Жыл бұрын
Do Dualtron have water proof scooter? Thanks
@theraid100
2 жыл бұрын
these reviews are top notch .. thank you
@ESG-ElectricScooterGuide
2 жыл бұрын
Thanks for the kind words -Vosk
@Simcore999
2 жыл бұрын
With the iron-Air you just need a philips screw driver and one hex key( I use a micro allen key with both ends as a screw driver for short range rides :-) 👍
@MrWilliam.Stewart
2 жыл бұрын
It's all about the rake bout the rake no wobble 🎵 🎶
@SynteconlineAuSupplements
Жыл бұрын
Love it! Very durable and well made
@ESG-ElectricScooterGuide
Жыл бұрын
Glad you like it!
@panagiotakisk
Ай бұрын
Hello from Greece any good settings for more speed
@exoxiii4381
Ай бұрын
I tried your setting, but it feels like it wants to move left to right when riding straight. Any suggestions?
@ESG-ElectricScooterGuide
Ай бұрын
Double check tire pressure. Do you have a steering damper? If the resistance is set too high then the scooter will wander back and forth slowly as you try to go straight. Try the minimum damping setting and then only use more if you feel speed wobble. -Paul
@Claud_us
9 ай бұрын
Paul, I dont think its opposite. Its the meaning that could be confusing. F=FAST not FIRM, same with S= SLOW not SOFT. But what I know 😉 ✌🏼
@ESG-ElectricScooterGuide
9 ай бұрын
Thanks for the tip!
@brennanIX
3 ай бұрын
Idk if my knobs are backwards or not. I can't notice any significant difference no matter which way I go. Maybe a bit of different speed on the rebound, but they feel identical when I compress then. Only adjusting the preload changes firmness. I don't think the guy in the video knows quite what he's talking about, because I don't think the knobs are meant to have anything to do with firmness, but rather rebound speed. My issue is that I'm just trying to make mine ride better, and I don't know know the settings for that without testing every position on like a 20 minute ride, which I don't have to to do. I don't know what surfaces need more/less preload, and what firmer/softer rebound pressure and speed actually effect. I know mine sucks ass over bumps and gravel, though, and I literally avoid anything like that because it's that crappy.
@ESG-ElectricScooterGuide
3 ай бұрын
You should be able to feel the difference
@brennanIX
2 ай бұрын
Putting my weight on it, I don't see any difference at all from all the way to one side or the other. The shocks compress exactly the same amount either way. When riding on gravel, I can bottom out the dials to either side, and MAYBE there is some difference, but not enough to consistently feel it and actually tell. It's feels like ass on gravel either way, like the scooter always wants to kick out to the side like the rear is sliding around.
@AdamSmith-jt1dr
6 ай бұрын
how do you remove the speed limiter? I tried unplugging the 2 white connectors with no change
@ESG-ElectricScooterGuide
6 ай бұрын
Please contact the dealer for instructions!
@Guille8888
2 жыл бұрын
i have both, 35ah and 32ah version, and something strange happens with the 32ah one it has only 20 kilometers, and no matter how i adjust the suspension, i can not make it softy (slow rebound) any reference?
@ESG-ElectricScooterGuide
2 жыл бұрын
Front or back ?
@Guille8888
2 жыл бұрын
@@ESG-ElectricScooterGuide both, front and back suspensión 😓
@chrismunroc6111
Жыл бұрын
I'd just had my Nami E Max for week. What suspension settings would you recommend for me. I weigh 285 and ridding on urban roads??
@ESG-ElectricScooterGuide
Жыл бұрын
Try 3 clicks from the end!
@abellau4105
2 жыл бұрын
Should I adjust the rear sprint? What would it change in terms of handling
@ESG-ElectricScooterGuide
2 жыл бұрын
It’s usually adjusted by your weight!
@gorgeousj206
Жыл бұрын
After many months I’m gonna get a nami burn e2.
@ESG-ElectricScooterGuide
Жыл бұрын
Awesome! Great choice for sure. -Vosk
@gorgeousj206
Жыл бұрын
@@ESG-ElectricScooterGuide thanks man. Your reviews and knowledge are top tier. Appreciate everything you guys do
@MrBalas3
10 ай бұрын
How do you like it? Are you a tall rider by chance? I'm 6'4" and mainly considering it because of the range and handlebar height for taller riders. Concerned about the super speed though. @@gorgeousj206
@jimsheard5881
2 жыл бұрын
Testing these settings, getting vibration worstening 50km/hr plus, it's there at 30km but not bad which seems to be wheel balancing, still on stock tyres 28Ah Version 2. Heading to a tyre shop tomorrow (cars) but as the wheel can't be balanced as you'd do a car looking for tips.
@ESG-ElectricScooterGuide
2 жыл бұрын
Good luck with your issue
@mrdhunter4238
Жыл бұрын
I had the same problem with my nami burn e I could feel and hear a rattle that sounded like it was the motor balance or the stem and voila lol unscrewed the stem messed with the grub nut that holds stem tightened that a bit and tightened the 2 bolts jyst tight enough where the stem connects and its near rock solid ..massive improvement oh and 760 mm handlebars helps to
@ihuliige6776
2 жыл бұрын
Why not mount the steering damper the "wrong" way? Is there really any difference? It protrudes less this way and is maybe a tad safer in case you collide with somebody..
@ESG-ElectricScooterGuide
2 жыл бұрын
Thanks for the feedback
@bosada2960
Жыл бұрын
Can I use this setup guide for Nami Klima? The Klima comes default with front preload of 4 threads and rear preload of 6 threads. Thxs!
@ESG-ElectricScooterGuide
Жыл бұрын
Might be slightly off honestly!
@bosada2960
Жыл бұрын
I noticed that front springs are 1300 lbs/in and rear are 1200 lbs/in. I have the Klima Max if that makes a difference.
@MurphySuperstar
4 ай бұрын
What is your advice for tire pressure on this Nami with PMT tyres?
@ESG-ElectricScooterGuide
4 ай бұрын
45!
@MurphySuperstar
4 ай бұрын
Thank you !
@orange42
2 жыл бұрын
Link for spring tool of right size please. Edit: It's 47mm so a wrench spanner tool 45-52mm should be the one.
@ESG-ElectricScooterGuide
2 жыл бұрын
Similar to these but sold out 11" Long Reach Hose Gripper Pliers - 3/4" www.amazon.com/dp/B07Q1DRTPY/ref=cm_sw_r_cp_api_i_YS7AV7EC7V3KEYZK4SDD
@zedixx
2 жыл бұрын
you don't know how to reset the counter apparently there is a device to connect to it my not found ..... in Europe the p7 p9 is disabled
@ESG-ElectricScooterGuide
2 жыл бұрын
Let us take a look!
@gmarinop3214
2 жыл бұрын
How does the big dog like this scooter compared to wolf king gt? :D Specifically, for tall riders, which of the two does he feel more comfortable riding?
@ESG-ElectricScooterGuide
2 жыл бұрын
Suspension is better on the Nami -RAMIER
@gmarinop3214
2 жыл бұрын
@@ESG-ElectricScooterGuide That goes without saying! :D Did you notice any stem wobble on high speeds?
@rsstnnr76
2 жыл бұрын
Are the tires tubeless? How resistant are they to flats? And how strong is the stem? Any chance it could fold while riding?
@ESG-ElectricScooterGuide
2 жыл бұрын
Yes tubeless and stem very strong!
@rsstnnr76
2 жыл бұрын
@@ESG-ElectricScooterGuide When you say tubeless that just literally means no tubes but still air filled, right? Are they more puncture resistant?
@Cranky-Panda
Жыл бұрын
@@rsstnnr76 yes no tubes but tyres is still filled with air.
@user-bp5py6bh3g
Жыл бұрын
I get wheel hop on tight cornering, whether slow or fast. What do I have to do to prevent that?
@ESG-ElectricScooterGuide
Жыл бұрын
Do you have a damper ? -Vosk
@user-bp5py6bh3g
Жыл бұрын
@@ESG-ElectricScooterGuide Yup, it's not related to do the damper though. It's the suspension geometry, as other Nami riders I ride with don't have wheel hop.
@likewater1429
Жыл бұрын
Would anyone be so kind to inform of TWO questions. 1: if I can adjust the height of the handle bars. I am new to the scooter world. I did not watch the whole video, sorry. I am 5'8 tall 160 pounds. Can I lower or raise the bars. 2: what are the security features besides having a portable lock? Alarm system? Locking the tires from rotating? GPS tracker?
@ESG-ElectricScooterGuide
Жыл бұрын
Handlebars cannot be lowered but 5-8 you should be fine!
@likewater1429
Жыл бұрын
@@ESG-ElectricScooterGuide thank you for responding. How can I find a answer for question number 2
@jgriffin712
2 жыл бұрын
Where do you get the Nami spring tool from? Does it come the purchase of the scooter? I plan to purchase one in a few days
@ESG-ElectricScooterGuide
2 жыл бұрын
The newer namis should come with the tool
@jeffmudd6067
2 жыл бұрын
E2 comes with it
@jmavlogs0729
2 жыл бұрын
Mine's coming tomorrow.. its 5 am now and i cant sleep ffs 🤣🤣🤣
@ESG-ElectricScooterGuide
2 жыл бұрын
Thats awesome! Enjoy your new scooter. -Vosk
@MrBalas3
10 ай бұрын
How do you like it? Are you a tall rider by chance? I'm 6'4" and mainly considering it because of the range and handlebar height for taller riders. Concerned about the super speed though.
@jmavlogs0729
10 ай бұрын
@@MrBalas3I'm 5'11. It's perfect for me. I think you will like it. As for the super speed, it won't be speeding by itself. You entirely set it up just the way you like it, if u wanna avoid those crazy surge and speeds 😊
@Mcsteamykettleface
Жыл бұрын
Is there a way to by pass speed restrictor without disconnecting wires
@ESG-ElectricScooterGuide
Жыл бұрын
What country are you in ?
@Mcsteamykettleface
Жыл бұрын
@@ESG-ElectricScooterGuide Australia
@Laserkittylazercat
2 жыл бұрын
Interesting... Opposite steering rake needed compared to the NAMI 11".
@ESG-ElectricScooterGuide
2 жыл бұрын
Same as for the original NAMI BURN-E (both the BURN-E and BURN-E 2 have 11" tires) Both need more spring in the front to increase the rake and slow down steering. -Paul
@perrymason8471
Жыл бұрын
Will this apply to the Klima?
@ESG-ElectricScooterGuide
Жыл бұрын
It does not!
@DCifuentesJ
2 жыл бұрын
How much does Paul weigh?
@ESG-ElectricScooterGuide
2 жыл бұрын
Hi Daniel, I weiigh 165lbs plus I usually have 9lbs of gear on when I'm testing. Often less gear on when filming. It's fortunate, because Chuck also weighs 165, so all of our old data and all of our new data has the same weight rider. -Paul
@antonypartali
2 жыл бұрын
Hi Paul!!🙋 Why nobody says anything at their reviews (and you) about the motors on New Nami 2....??? 🤔 Did they get bigger the motor magnets or they just changed the outside for better cooling....?? How much cm are the magnets...?? 6 cm or 6.5 cm.....???🤷
@ESG-ElectricScooterGuide
2 жыл бұрын
Thanks for the heads up. I haven't heard of any significant changes to the motors, but will see what I can find out. Unfortunately I probably won't have time to take them apart to compare visually (we have an original 35Ah BURN-E, the BURN-E 2 and the 2 MAX on hand). -Paul
@antonypartali
2 жыл бұрын
@@ESG-ElectricScooterGuide thanks allot Paul!!🙏 If you have on your hands the new and the first Nami, the difference from outside the motors is obviously!! Maybe if you ask the guys who fix scooters ( and Nami of course 😁), will tell you if inside have any difference the motors between 2 models..
@dcmackintosh
2 жыл бұрын
Is there a guide covering how to adjust the Advance P-settings (Turbo mode, etc.) for these scooters?
Пікірлер: 94