Hi from Australia. Many thanks for sharing your detailed techniques in clock repair. I myself have been repairing for 30 years and still learn new things such as your removing oxidisation using salt and vinegar. Imagine the same flavour used on potatoes crisps! Great work.
@jamesmartin5370
2 жыл бұрын
Thank Garuda, I now will never look at flavoured potatoes crisps ever the same.
@benerabilis
2 жыл бұрын
Even a respectfull work on further faults. I like how you restore the bearing witch has been punched smaler in an earlier restoration. You did not distroy these restoration with a new big bearing. You made a new bearing exact siced to the pillot and to the old restoration. That is extraordinary!!
@jamesmartin5370
2 жыл бұрын
Thanks Frank, This movement had never had bushings installed in it. Wear on the pivot holes was over 100 years old. The bushings I installed if lubricated as needed should last another 100 years. I feel the same as you do on those oversized bushings.
@joshuadean1880
2 жыл бұрын
Once again Mr Martin you are the master
@jamesmartin5370
2 жыл бұрын
@@joshuadean1880 Thanks Joshua, At first sight this one was rough looking. It turned out looking just great not to mention it keeps perfect time now.
@MrPrentissDJones
2 жыл бұрын
Another Great episode
@jamesmartin5370
2 жыл бұрын
Thanks Jones, Its sure been keeping good time, surprising how well these do for as old as they are.
@xspaddriver
Жыл бұрын
I always enjoy watching a craftsman who takes pride in his work. Thanks.
@jamesmartin5370
Жыл бұрын
Thanks Dave
@denisblasius3946
2 жыл бұрын
Je vous admire,vous réparer des mouvements sans grande valeur et vous les faites fonctionner pour de nombreuses années encore,ces horloges ont été fabriquées par des ouvriers d une autre époque nous devons entretenir leur travail
@jamesmartin5370
2 жыл бұрын
Merci Denis. j'aime mon travail
@davestelling
2 жыл бұрын
Another excellent job, James. I almost always learn something here, watching you work. Thanks...
@Johnmiller-gm9lm
2 жыл бұрын
Thanks again.
@ronaldlinkenhoker5705
2 жыл бұрын
Great job getting the oxidation off. Love your channel.
@jamesmartin5370
2 жыл бұрын
Its amazing when you look at the before and after product.
@ronaldlinkenhoker5705
2 жыл бұрын
It really is !
@kkyykk7042
2 жыл бұрын
Excellent
@jamesnicholson3313
2 жыл бұрын
Thankyou James for yet another wonderful looking job, this one where you are cleaning the wheels and plates I missed the other day,thanks for the tip on salt,vinegar and soda, I will give this a go. It's such a delight to see the beautiful sparkle on the plates and wheels, many thanks again. Jim from AUSTRALIA.
@jamesmartin5370
2 жыл бұрын
Sure, Through the years I have had a lot of people come to me about strange white splotches on clock and watch movements after ultrasonic cleaning. The white splotches is where the gold gilt is missing, its brass that has had the copper removed from it. Ultrasonic cleaning is superior in cleaning articles but is hash on gold gilt parts. The standard to test an ultrasonic machine is to immerse pieces of aluminum foil into the ultrasonic tank. Then the machine is turned on and if its working properly, the aluminum foil will have dents and holes punched through it. Gold gilt has the same hardness as aluminum foil so the same damage will happen to gold gilt if put into that machine. This is why gold gilt jewelry is never cleaned in an ultrasonic.
@donniewolfe3260
2 жыл бұрын
Really enjoy your channel.I just got back a Seth Thomas Shasta model mantle clock and a black Sessions mantle clock with the green pillars early 1900s.I think the Seth Thomas has the best sound of the two brands.
@jamesmartin5370
2 жыл бұрын
That's Great! Are you going to maintain them in running order your self?
@donniewolfe3260
2 жыл бұрын
No I don't think so,I'm mechanical with all sorts of tools.But i will let my local clockmaker help me maintain these clocks.by the the way i have another Sessions in the shop right now that i have rescued.
@joetallon4968
2 жыл бұрын
Wow, what a difference. I appreciate you sharing what you use to clean up the oxidation. I’m sure I will be using it in the future. I also like the use of rubber bands until the pivots are in place.
@jamesmartin5370
2 жыл бұрын
Thanks, A lot of people struggle putting these clocks together using one hand to squeeze the plates together and the other to manipulate the pivots to their correct pivot holes. Using rubber bands frees up both hands and makes the process much easier.
@user-ko3cn4lq1i
2 жыл бұрын
Thanks for a very useful video, a good way to assemble a mechanism using rubber bands. Excellent result!
@jamesmartin5370
2 жыл бұрын
I use that rubber band on a lot of movements. It reduces assembly time and and prevents pivots from scratching the insides of the plates. Glad you got something of use from it.
@williamwilliams7706
Ай бұрын
You are a fine craftsman. I love your background music. It reminds me of a small screw machine shop that I used to get small parts made. In my house though two clocks ticking away are plenty.
@jamesmartin5370
Ай бұрын
Thanks....
@clc7800
2 жыл бұрын
Great work!!! The use of the rubber bands is new to me. I will use that technique on my next clock. Thanks you for sharing. I look forward to your next video.
@jamesmartin5370
2 жыл бұрын
Thanks CLC, Those rubber bands make things go much smoother, also eliminates fingerprints on the plates.
@billg125
Жыл бұрын
More from Australia. Yet another excellent video James. The movement looks terrific, what a beaut clock
@jamesmartin5370
Жыл бұрын
Thanks Bill, I Generally don't see movements this bad, a good example of why these movements had gold gilt on them.
@omerucar8969
5 ай бұрын
Very good job thanks
@stevensaylor9430
8 ай бұрын
Great job. Thank you.
@jamesmartin5370
8 ай бұрын
Thanks Steven...
@lesliebucari4096
2 жыл бұрын
Absolutely beautiful job. So many different types of repairs. A real treasure. Thank you Jim. Merry Christmas Sir 🙋♀️🙏🎄
@bwd1963
2 жыл бұрын
This is by far one of the best videos iv seen so far .great camra work and explaning and showing showing your technics in puting movement back together . Great job.
@Mr1jim
2 жыл бұрын
Thanks, This was one of the worst Oxidized movements I have come across.
@weejohnoo
Жыл бұрын
Another great video. Priceless learning for an amateur such as myself. The use of elastic bands to aid reassembly is a fantastic tip! Thank you for uploading these videos and sharing your knowledge. Happy Christmas and best wishes for 2023, John, Ireland.
@jamesmartin5370
Жыл бұрын
Thanks John, That new year is just around the corner, hope all works out well for you as well
@jaumejaume8925
2 жыл бұрын
hello sir james, very, very interesting video. I really like how it restores, I always learn from you. i am a fan and i am impressed with how he does it. thank you very much from barcelona, catalonia.
@jamesmartin5370
2 жыл бұрын
Thanks Jaume, I have never seen a movement this bad with corrosion, glad it all came off and it runs perfect now.
@chualeechuan9493
Жыл бұрын
Very professional ! The video quality also awesome 👍
@DanaBasiliere-BTVREALTOR
2 жыл бұрын
Hello James, I have a Seth Thomas mantle clock in near perfect condition. The works needs to be cleaned and oiled gingerly with thin clock oil. I have been watching videos like yours before I try it so I do not "butcher" it. I am nervous about taking it apart. When I do I will video it so I can get it back together. The face has the escapement visible (looks nice) and the face cleaned up like new with a damp soft cloth. I got the chime works synchronized. Just need to clean and oil it so it will keep running. Thank you for your helpful video. God speed Sir.
@jamesmartin5370
2 жыл бұрын
You should be able to get it up an running just fine...
@luisdardis5223
Жыл бұрын
SUPERB.
@brendagraham2653
2 жыл бұрын
Love your videos!!! I'm trying to watch all of them to get as much information as possible before tackling my latest clock find. A Herschede 1917 grandfather clock I rescued from a dumpster!!! I've worked on Seth Thomas and Sessions clocks but this one is special. Any tips, guidance or cautions you could send my way would be well received. Thank you for doing these videos!!
@jamesmartin5370
2 жыл бұрын
Sounds like a grand find. Take your time on that Herschede and I am sure it will run for many years to come.
@wildernessofzinn17
2 жыл бұрын
People are idiots. Great find for you, though. Congrats.
@djhscorp
Жыл бұрын
Top job 👍
@julierobertson2383
Жыл бұрын
Attention to detail is a sign of a great CRAFTSMAN
@jamesmartin5370
Жыл бұрын
Thank you.
@JMSobie
8 ай бұрын
Some people are KWM people and some people are Bergeon people. And then there's James who just fabricates bushings from scratch. I like it.
@jamesmartin5370
8 ай бұрын
Thanks, This way no need to stock the variety of bushings needed. Thanks again.
@johnbrodehl9743
2 жыл бұрын
This clock is not from the 1880s. The #89 movement was not introduced until 1902. Brasso is fine to use, as long as you get it cleaned off the parts.
@jamesmartin5370
2 жыл бұрын
Thank you, This was an extreme case of galvanic corrosion, likely from someone in the past damaging the gold gilt. I agree, Brasso is a good abrasive polish for brass. These movements were plated with gold gilt to protect the brass. Concern abrasive in products like Brasso may damage gold gilt on these movements.
@max.m.8873
Жыл бұрын
👏 Bravo 👏💪👏👍
@Howema
2 жыл бұрын
my grandparents are/were hoarders and while grandma don't live on the farm anymore after grandpa passed away they had all kinds of things including two mantle clocks in the dining room. unfortunate i hear the house is infested with roaches and mice now but there were signs long before that they were present. (to give you an idea how packed the place was with random stuff, even the property looked like a junkyard and i explored it alot as a kid, i recall kicking a random pile of dirt and finding a real ivory elephant figurine about the size of a chess piece one time, my mother has that now)
@jamesmartin5370
2 жыл бұрын
Did anyone end up rescuing the two clocks?
@Howema
2 жыл бұрын
@@jamesmartin5370 to be honest, i don't know, a few of my aunts and uncles even when my grandparents lived there would occasionally walk off with things, not to sell of course but they would be spotted inside their homes later. based on what usually wanders off i bet those clocks are still there.
@kevinwallis2194
2 жыл бұрын
Ive never used vinegar to clean brass and copper. I normally use ammonia. The brass polish i use also has ammonia in it.
@jamesmartin5370
2 жыл бұрын
I normally use ammoniated clock cleaner made for clocks for cleaning. But this movement was so badly oxidized it took a drastic measure to get the oxidization off. Vinegar and salt produces hydrochloric acid, the acid removed the oxidation. Most brass and copper cleaners and polishes out there have hydrochloric or similar acid in them.
@pauldyck4596
2 жыл бұрын
Really nice work. When you put the urethane on, how do you keep it out of the pivot holes and gear teeth? What was the polishing compound you used with wood in the final step of polishing pivots? Thanks.
@jamesmartin5370
2 жыл бұрын
Thanks Paul, I cover the pivots with masking tape, peg out the pivot holes. Sprocket teeth do light spray from the top side, no angle spray on the gears, and hope for the best. Urethane is a good finish, its the clear that is on cars nowadays. Polishing compound I make it up as I need it. Its Diamantine, Mixed with some oil on a glass plate. Its just a fancy name for a fine grade of aluminum oxide. Its been the clock and watchmakers standard for polishing steel parts since the beginning.
@davidwilliams1383
2 жыл бұрын
Hello James, another great video with lots of great tips and pointers. Interesting and educational. What do you use to do your solder work, a small torch or? And, silver solder? Keep up the great work.
@jamesmartin5370
2 жыл бұрын
For low temp, low stress non-structural work, I use silver solder and a solder iron or small torch if needed. For high temp work mainly structural items, I prefer to use the Smiths Little Torch with oxygen and acetylene, this way I can use Harris Safety-Silv 56 Silver Solder Brazing Alloy. The safety-silv 56 rod matches the tensile strength of clock brass. I just got through re-tipping all the teeth on an escape wheel that someone butchered in the past. Standard silver solder would have been too soft for this repair. The Safety-Silv 56 worked great, a higher temp is needed, the Smiths Little Torch worked great, was hot enough to flow the 56 rod on the tips of the escape wheel teeth without destroying them.
@craigcoen187
5 ай бұрын
As a hobbyist, I have learned so much from your videos. What brand of urethane do you use on your brass?
@jamesmartin5370
5 ай бұрын
Any good automotive grade of rattle can urethane will work. Lacquer works well but won't stand up to abrasion and solvents.
@craigcoen187
5 ай бұрын
Thank you for your reply sir. You do amazing work.
@wildernessofzinn17
2 жыл бұрын
You make very good clock tutorials for us beginners. But may I ask, what causes a verge to skip across the escapement wheel?.
@jamesmartin5370
2 жыл бұрын
There's no one answer that will correct this defect, source of the defect needs to be found first then corrected. If adjustments have been made that were not addressing source, these adjustments must be taken into account and corrected. Possible sources are: 1st thing to inspect is power to the escape wheel, make sure there is good uninterrupted power. Only make adjustments if all power problems have been addressed. Bent arbor on escape wheel Escape wheel out of round Escape wheel teeth not running concentric with center axis of arbor Worn escape wheel pivot Worn pivot hole on escape wheel Damaged escape wheel teeth Worn escape wheel teeth Worn verge pallet surfaces Verge pivots or pivot hole worn Verge too far away from escape wheel Verge pallet might be out of adjustment from a previous person This should get you off to a good start on what to look for and will in most cases get it running.
@Drew-mr6tr
Жыл бұрын
I would have so love to have watched this. There is no need for incessant clock ticking. So irritating.
@jamesballock1768
Жыл бұрын
Why not use jewels instead of bushings to improve the quality of and life of the mechanism?
@jamesmartin5370
Жыл бұрын
Jewels could be used. I am unaware of any manufacturer who fabricates any of the size needed. I have from time custom fabricated on customer request Lignum vitae bushings for clocks. They out last brass bushings and, because of the natural oils they never need to be lubricated. There is a company selling small ball bearings that can be used instead of brass bushings, probably next best thing to using jewels.
@johnbrodehl9743
2 жыл бұрын
Anchor escapement. No verge.
@RalphCollectsClocks
Жыл бұрын
Would this clock be considered as Adamantine? It seems to be a similar design and shape but isn’t the more darker colour.
@jamesmartin5370
Жыл бұрын
Yes, same process, it was a celluloid veneer, glued to the wood case
@RalphCollectsClocks
Жыл бұрын
@@jamesmartin5370 Ah. Thanks for the reply. I love American-made clocks and still haven’t managed to get a black mantel clock let alone a Seth Thomas Adamantine!
@winstonchurchill3597
2 жыл бұрын
Have you ever had a mainspring get away from you? Those springs make me nervous.
@jamesmartin5370
2 жыл бұрын
No I haven't. I am real cautious with these, always use gloves or thick rag. Always double check to make sure they are fastened in the jig tight.
@MrPeterpat
2 жыл бұрын
why do tou have the annoying clocks ticking in the background?
@jerrypeal653
Жыл бұрын
Could you have used electrolysis for the brass fish ?
@jamesmartin5370
Жыл бұрын
Yes that would work, but I have never used it for this purpose.
@jerrypeal653
Жыл бұрын
@@jamesmartin5370 nice repair by the way .
@jackdupont1883
2 жыл бұрын
Hey was it originally a black mantle clock
@jamesmartin5370
2 жыл бұрын
No, this one has the original simulated wood finish on it, the other video is at: kzitem.info/news/bejne/tXuwrqGsoWuphIo
@0987brian
Жыл бұрын
Its a great video but I had to stop watching the all the difference clocks ticking got to me
@jamesmartin5370
Жыл бұрын
I understand, My grandkids say that room is haunted. I need to run them before they can be released to the owners. I now have put a noise filter on the camera to help with ticking.
@0987brian
Жыл бұрын
@@jamesmartin5370 Thank you. I will look out for more of your great videos and subscribe if the ticking is not so loud 😄
Пікірлер: 90