✅Any donation to support the channel will be much appreciated!
Paypal : cechaflo@gmail.com
✅Get our courses at: www.cechaflo.com
---------------------------------------------------------------------------------
This second video will show how to set up a 'Fortuna Leather Skiver'...As you will see, the whole procedure is comprised in adjusting three important 'pieces' of the machine: presser foot, feed roller and bell knife.
I have adjusted the machine to skive/slice thin/fine furniture/automotive leathers, etc...I mean 0.5 mm gap between 'presser foot side' and 'bell knife edge' and the gap between 'feed roller and bell knife inside edge' less than 0.5 mm . For thicker leathers the edge of bell knife should go a little further away 2.5 mm at most from the presser foot side.
You will see that is not so difficult as it seems or some masters want us to believe.
I hope you find it useful!
Cesar
Негізгі бет Setting Up a Skiving Machine - Part 2 Leather upholstery
Пікірлер: 99