We take the VESC ID of the second motor from the Vesc Tool in the CAN section at the bottom right, press the Scan button, look at which ID and enter it into the display settings.
Настройка CAN ID на экране, чтобы работали передачи и паркинг на обоих весках.
VESC ID второго мотора берем из Vesc Tool в разделе CAN справа снизу, жмем кнопку Scan, смотрим какой айди и вписываем его в настройки экрана.
Негізгі бет Setting up CAN ID on the display so that gears and parking work on both VESC controllers
Пікірлер