Thanks for the demonstation, one thing I did which prevented center screw comming loose was adding a lock washer - works like a champ!
@DJFlores01
5 жыл бұрын
Thank you for the great video, as you mentioned, there are so few videos on how to correctly, and step by step show videos on the subject of reloading, something that is absolutely necessary for someone who owns firearms and actually practices with them.
@Dub456
8 ай бұрын
Very well explained. Excellent camera and lighting setup to match the visual with the verbal.
@davesr8746
5 жыл бұрын
Good video. Followed your steps setting my 9mm dies and it worked very well. Now on to powder charges. Thanks!
@AlmiraAbsin
2 жыл бұрын
Very nice job going through step by step. Excellent Jim.
@rzby
3 жыл бұрын
Awesome tutorial. I still come back from time to time to help me adjust the dies. Thanks!
@craigmitchell4209
3 жыл бұрын
This video was extremely helpful, thank you for taking the time to make it.
@dirtydog4515
2 жыл бұрын
Thanks, nice light on your press.
@mikeangelastro7648
11 ай бұрын
Good video 🇺🇸
@P.E.J.
Ай бұрын
old video, but you need a lock-washer on that centerbolt ;-)
@saskatchewancoyote5338
11 жыл бұрын
Thanks for the video!! just got my LnL AP w/ Hornady dies in 9mm. Can't wait to reload. Cheers!!
@tacticsofroddi5889
2 жыл бұрын
Glad you made this, you helped me out s ton
@utahreadiness
4 жыл бұрын
thank you for keeping it simple,
@tombo552001
8 ай бұрын
Very nice video. Do I need a different die for the powder for each caliber?
@rubykaufman5361
10 жыл бұрын
Good vid shows just what I needed to see, Thanks.
@jean-renedenig4840
9 жыл бұрын
Thanks a lot for your time to do this very helpful video !! A1..
@KevinR9763
10 жыл бұрын
Great video. Just got the same press. Going to be loading 40s&w.
@mikesimmons7539
3 жыл бұрын
Very helpful . thanks
@vanish747
3 жыл бұрын
You added the bell to make seating the bullet easier at station 2, at what station was the bell taken out, I am assuming the seating die performs two operations, one is to seat the bullet to the correct depth and the second function is to remove the bell that was put in at station 2, by that I mean to remove it so the wall of the case is straight again.
@Molksnagen
2 жыл бұрын
Yeah, I was waiting for him to talk about the crimp at the end, but he didn’t.
@DustinNulf
3 жыл бұрын
good work sir
@christ6177
7 жыл бұрын
Thanks for the video. I have a question about the powder drop. do you need a special die for the 10mm/40cal or is it universal where any case will activate the powder drop? Your video was very helpful.
@markking802
6 жыл бұрын
Thank you great video
@iamkikoman
7 жыл бұрын
thank you ! Great video
@mafirearmsafety
4 жыл бұрын
Use a factory load to adjust depth, no mic needed
@poppys3728
4 жыл бұрын
I would rather use my own caliper than trust the factory. If you are going to reload, you should do it right, not half as$ed.
@user-mi1ol5ji1i
10 ай бұрын
Does the shell plate holder tool come with it?
@joejeans7913
3 жыл бұрын
you should have more subs. I watched 4 other ones couldn't see anything they were telling me to do. Whats that tool you have called. . red wrench zi nerd one. thanks for making this video.
@Yomamasllamas
6 жыл бұрын
Super helpful!
@dav8road598
2 жыл бұрын
What size of hex head are you using to tighten the ring screw?
@loz9487
3 жыл бұрын
Does this take out a spent primer or is there a tool to do this?
@chassteiner5781
2 жыл бұрын
Dude...that right hand pinky finger nail tho....scoop coke much? 🤔
Пікірлер: 33