I am currently doing identical build. One thing I did when I was running into simalair issues with sight and where to get maximum usage . I moved the landslyd closer to the bow 1 notch . Made a great improvment . Its not alot but it tightened up the pin gap and seemed to help line every thing up . I also ran my pins down . My 3rd pin is just above my level. In my mind , if Im shooting a long shot its nice to see that bubble closer to the far pin . Then i centered the first pin in the center of housing .
@AlphaBowhunting
2 жыл бұрын
Thanks for the comment. Agreed on the adjustments. My next video that goes up in a few days talks about slider adjustments and set up
@sanfordt.6856
4 ай бұрын
I have the exact setup and love it!
@titansfan2104
2 жыл бұрын
Change to an Allen screw man. Simple as that. But I do agree.... why not use all Allen keys.
@donaldvonlintig8445
5 ай бұрын
You can switch out the Phillips flat head screws, for the metal sight tape, with Allen flat head screws, one less tool to carry !
@davethompson1702
Жыл бұрын
you can use good ol fashion Elmers white glue for the screws... its just enough hold but not loc tight, you can back the screws out if needed without worry ... even the phillips heads for the sight tape
@brandonrodarte3658
7 ай бұрын
Sick bow!
@dirtjunkie2749
2 жыл бұрын
I put blue loctite on everything, have never had anything come loose. I know some people use string wax and have good results.
@AlphaBowhunting
2 жыл бұрын
Thanks for watching and thanks for the comment. Agreed on the string wax, but like you prefer the blue locktite. 👊🏽
@c.crowther8553
2 жыл бұрын
Thanks for the video! I am going to be trying out this same sight as well this year, main reasons being the Hoyt picatinny attachment for my rx5 ultra, the rapid wheel feature, and the weight difference compared to the heavier hogg father I have used for a while with my bows. I too am curious on the durability of everything on it. I'm still waiting for mine to come in (you're right, it was hard to find one. been waiting for over a month) but looking forward to playing around with it and seeing if it will be my new favorite!
@AlphaBowhunting
2 жыл бұрын
Good luck with the new sight. Enjoying mine so far, and I agree with you on the weight factor. Thanks for watching and for commenting. 👊🏽
@krisaunedi4920
2 жыл бұрын
Right dude I really enjoyed this vlog you did on you RX-7 Ultra build. I'm just waiting for my RX-7 to come in and start shooting it. Can I ask you one thing is that what is that you really like about your bow and what is your arrow setup. Cool keep up the great work buddy and have a great day!!
@AlphaBowhunting
2 жыл бұрын
So far I really like that this RX7 ultra has less vibration than last years rx5 Ultra and it is quieter on the shot. The specs are very similar to last year's and I prefer a longer bow with a bit longer brace height. Super forgiving, solid hold while aiming and quiet. All great qualities for a hunting bow. My arrow is an axis 4mm. I will be changing the insert/ point weight set up from last year and should be adding a video on that set up soon. Thanks for watching
@krisaunedi4920
2 жыл бұрын
@@AlphaBowhunting Nice thanks for the reply and your thoughts on the bow I'm happy that your enjoying your new bow. I have also switched to 4mm hunting arrows also I shoot the Black Eagle X-Impact and I love them. Again thanks!!!
@Cpt-Pugwash14
Жыл бұрын
another thing to consider is how fare you can move the sight down until you get fletching contact.
@mattg.8780
2 жыл бұрын
Hey man I just ordered an 80lb rx7u as well. I also have a landslyde on my rx5u which I love. But it’s been a bit of a love/hate until I got her dialed in. My question is…did you have to slide your sight “all the way down” on the pic rail because of the (high) speed? I’m just curious as I will be up against the same woes…whenever Hoyt sends me my bow. You seem extremely experienced so you probably caught on to the dynamics of this sight a lot quicker than I did.
@AlphaBowhunting
2 жыл бұрын
Sorry for the late response. My front sight position was based on my peep sight location. In order to give me maximum long range adjustment with my lower peep height location I had to start in a lower setting. I will also go over this a little more in depth on my upcoming viewer questions video. Thanks for watching
@andrewbickers853
Жыл бұрын
Obviously late to the party here, but currently going through a similar set up with a Ventum Pro 33 and Landslyde 5 pin. When you move the housing "up" on the mounting bar do you need to then re-check your 1st axis?
@waynestevenson9613
2 жыл бұрын
Thanks for this review! I’ve been checking this sight out, I currently run an Axcel Achieve for 3-D and have been considering this in a single pin for a crossover (hunting or 3-D) because I like the quick movement of the Landslyde. What is your opinion on that?
@AlphaBowhunting
2 жыл бұрын
Agreed, I really like the Achieve for target/ 3d and the landslyde is a really good crossover sight. The quick adjust is one if the better ones I have played with for a hunting sight.
@waynestevenson9613
2 жыл бұрын
@@AlphaBowhunting 🙏🏼
@Charlie_Bravo_Echo
Жыл бұрын
There's one thing I don't understand.... 3 pin roller sight with 2 marker pins on a tape.... Set it for 20, 30, 40..... but you have an elk coming in around 70, 80, 90. How will those 3 pins match the 2 markers as you roll the 2 markers to touch 70 & 90 being that the drop at 20, 30 40 is much tighter then the arrow drop at 70, 80, 90, but the markers are fixed along with the pins. This setup only makes sense with a single pin but I don't work at nasa.
@matthewkyle6939
7 ай бұрын
They won’t be exact but will reflect the number on the tape. Meaning no matter where your indicator is play on the tape they will be an accurate refference point
@michaelklein3244
2 жыл бұрын
So you know the landslyde comes with both metal tapes and sticky tapes. I like the white tapes
@AlphaBowhunting
2 жыл бұрын
Yes, I have always used the white tapes or the custom made tapes from archers advantage. I like the thought of the metal tapes for hunting because of the possibility of weather. I hunted bighorn a while back and it rained for days and my tape was hardly visible even though I tried to cover the sight with a zip lock the moisture still got to the tape. Thanks for watching
@TrueLineOutdoors
2 жыл бұрын
What pins do you like 0.19 or 0.1?
@AlphaBowhunting
2 жыл бұрын
I like my top pin or 2 to be .019, then ,010 if I can customize. Having the top 2 pins a bit larger helps in low light conditions. I like my last pin to be smaller so aiming at distance is more optimal as well. Thanks for watching.
@GabrielRodriguez-iv7fl
2 жыл бұрын
What vanes are you running?
@AlphaBowhunting
2 жыл бұрын
I am running the AAE Hybrid 26. I also really like the AAE max stealth
Пікірлер: 29