Need to access a local repeater? Here's a "How To" on this topic. Stick around till the end to see what happens behind the scenes while recording these videos.
@daveborchard2019
9 ай бұрын
The Yaesu FT5DR tutorial videos are great! I plan to buy a Yaesu FT5DR portable transceiver soon. I totally forgot about tone burst access to repeaters. I setup the tone burst on a VHF radio many decades ago. Even decades ago, using tone burst was really crude technology compared to using CTCSS tone squelch.
@darz1271
7 ай бұрын
I'm new to this radio and new to VHF/2 meter repeater ops, but it seems that setting squelch type and tone freq are one of the most BASIC things a person needs to do to access most repeaters.... and somehow that's not even mentioned here.. am I missing something?
@alvarogaitan2529
3 ай бұрын
thanks, great job Steve 73 from kb2uew
@K4SRF
2 ай бұрын
You are welcome!
@shaunwarren8042
4 ай бұрын
Very helpful thank you, G1EYW and 73s
@K4SRF
2 ай бұрын
Glad it was helpful!
@rogerNKWYNNVIDS
Жыл бұрын
On the ft5 the touch screen has a half or a full second delay to prevent accidental Touch screen selection 👌this is an upgrade feature from the ft2d and ft3d
@randysnair02
8 күн бұрын
thank you
@romdinks9368
2 жыл бұрын
good video. The situation I have is that I have two frequencies in my area and both of them use the same repeater. However, when I set the repeater freq in one then it deletes it from the other freq. Any suggestions as to what I can do so that both maintain the repeater freq? I like the clock and of course the radio interruption. :-)
@KE8ODY-WV-Ares-Ham-Dad-3O4
6 ай бұрын
How do I change offset I thought this rsdio knew these things
@K4SRF
5 ай бұрын
It is in the manual. That's how I leaned to program mine.
@dondonranada6078
Жыл бұрын
Good evening. In config #16. How do i change my repeater shift frequency from 5.70 to 5.73? Thank you. Because if i change it from 5.70 it goes directly to 5.75. How do i go to 5.73?
@K4SRF
Жыл бұрын
I do not know. You might have to change the frequency step to 1 instead of 5 to do so. I have never come across this.
@dondonranada6078
Жыл бұрын
@@K4SRF freq is by 5 and no step by 1
@patriayvida4209
Жыл бұрын
@DonDon ranada kinda weird... Besides, I don't know of any radio with Steps lower than 5... (though I believe I've heard someone mentioned 2.5 ). If I'm wrong please correct me. 73s from KJ4BGW
@amercalifa5592
9 ай бұрын
On the YAESU FT5D, the X and GM buttons were combined, and the PMG button was added. This is not available in YAESU FT3D. Can you explain the significance of these changes? Thank you..
@K4SRF
8 ай бұрын
On my "to-do" list. Can't guarantee a time frame, but it will be done.
@KE8ODY-WV-Ares-Ham-Dad-3O4
6 ай бұрын
I csnt get my offsets correct
@K4SRF
5 ай бұрын
If you use the RT Systems software and download the local repeaters from Repeater Book, it will automatically populate the necessary settings. No fuss, no muss.
@jhill4963
Жыл бұрын
did you miss how to set the TX tone ?
@K4SRF
Жыл бұрын
I didn't realize I had. Thanks for catching that.
@dondonranada6078
Жыл бұрын
How do i put 5.73 as my offset freq on my yaesu ft5d?
@K4SRF
Жыл бұрын
Not sure that can be done. I have never tried it.
@KE8ODY-WV-Ares-Ham-Dad-3O4
6 ай бұрын
I cannot get into any repeater talk wise only hear them
@K4SRF
5 ай бұрын
How many repeaters are near your location?
@malanalan1
2 жыл бұрын
what if offset is 1.035 MHz How do you enter it?
@K4SRF
2 жыл бұрын
What is your location? I have never heard of an offset like this.
@nelxonmiranda
Жыл бұрын
What’s T call??
@K4SRF
Жыл бұрын
The default setting: MONI (USA version), T-CALL (European/Asian version).
@graham450100
2 жыл бұрын
Ars isnt working !!
@qwertcvbn139
2 жыл бұрын
화면을 검게해서 글자가 안보이네요
@jonhaze7537
Жыл бұрын
How do I set the tone.. =(
@K4SRF
Жыл бұрын
I thought I had that covered in the video. Let me me check this and see if I need to post a new video on the topic.
@KE8ODY-WV-Ares-Ham-Dad-3O4
6 ай бұрын
Hate this radio lol
@K4SRF
5 ай бұрын
Then why didn't you give us the reason(s) why you hate this radio?
Пікірлер: 36