Red Hat Certified Engineer - Practice Lab Setup Guide. RHCE Playlist: kzitem.info/door/PL8cE5Nxf6M6Z0wbx-_yMV54HNsFIJfyAW
@prasathsubramaniyan1259
5 жыл бұрын
Hi Ravi.. Thanks a lot .. I was successfully configured..👍
@TechArkit
5 жыл бұрын
excellent news.
@stacybrenda5914
5 жыл бұрын
Hello Sir, Thank you so much for this tutorial. I was able to configure the IPA server with your help! :)
@TechArkit
5 жыл бұрын
I am glad that video was helpful. Thanks Stacy stay tune for more upcoming videos.
@prasaths2570
5 жыл бұрын
Hi Ravi.. Welcome Back..
@TechArkit
5 жыл бұрын
Thanks
@unnatityagi175
2 жыл бұрын
An error occurred while cloning: The specified virtual disk needs repair.
@TechArkit
2 жыл бұрын
Initiate another clone
@lohbut2
3 жыл бұрын
Thank you sir for all your videos. It helped with RHCSA 8. Will you have updated tips on building RHCE lab?
@TechArkit
3 жыл бұрын
Yes, soon
@9763654994
4 жыл бұрын
Where is the script to reset server and client if we create some mess during practise
@TechArkit
4 жыл бұрын
There is no script, you need to create snapshot and restore the snapshot back whenever you messed-up with configuration.
@prassanna6521
3 жыл бұрын
Hi sir.i have 3 years old laptop with AMD processor with 12 gb ram available ,can I setup the lab with this ..
@TechArkit
2 жыл бұрын
Yes, you can setup the LAB.
@karthikeyan.c2101
3 жыл бұрын
Hi sir Virtual machine manager used to create practice lab it's possible when if it's possible kindly make step by step video
@TechArkit
3 жыл бұрын
Already uploaded
@himanshubhasin4926
3 жыл бұрын
Your videos are very helpful.I have one question : IN the institue labs in linux base machine they runs two virtual machines in boxes. and like once the practice is done. They just click one tab like remove .Which doesnt remove the machine.infect it removes everything work we have done. it again get back the same environment screen within 2-3 mins which is newly freshly.No work has done. ITs like fresh installation .It pick the image direct from any path and remove everything we have done in that virtual machine. I think that is script in boxes ..Do u have any idea related to this ?
@TechArkit
3 жыл бұрын
you can also setup similar one. First install fresh OS machine and configure IP and Repos then shutdown the machine and create the snapshot of the same machine. When you want to refresh just go back to snapshot and restore. It always go back to the same fresh OS.
@himanshubhasin4926
3 жыл бұрын
@@TechArkit thank u. so much arkit 👍🙏
@elmoutawakilabdelbarre9793
5 жыл бұрын
thank you for this awesom tutorial, but i want to know how did you configured the repo in the client machine in order to use Arkit- DVD repo
@TechArkit
5 жыл бұрын
Refer my previous video session YUM configuration for more details. Thanks Rachid.
@letsgodancin1
3 жыл бұрын
Does the IPA server have to be approximately at 40 GB with custom partitioning? And server 1, server 2 vm's with minimum config? Also do you think it's necessary to create 3 vm lab for rhcsa test? Or would the 3 vm (IPA, server 1, server 2) set up be more applicable for RHCE?
@TechArkit
3 жыл бұрын
If you would like to simulate exact lab like RHCSA then yes you need.
@Praneshkulkarni
4 жыл бұрын
Hi Ravi, i am unable to install nds-ldap package getting * base: mirrors.piconets.webwerks.in * extras: mirrors.piconets.webwerks.in * updates: mirrors.piconets.webwerks.in No package nds-ldap available. Error: Nothing to do [root@ipa yum.repos.d]#
@TechArkit
4 жыл бұрын
Your repository do not have nds-ldap package, Can you please try EPEL repository.
@Praneshkulkarni
4 жыл бұрын
@@TechArkit ya sure will try and update
@Praneshkulkarni
4 жыл бұрын
Hi Ravi, tried with epel same error * epel: my.fedora.ipserverone.com * extras: mirrors.piconets.webwerks.in * updates: mirrors.piconets.webwerks.in No package nds-ldap available. No package epel.repo available. Error: Nothing to do [root@ipa yum.repos.d]#
@TechArkit
4 жыл бұрын
@@Praneshkulkarni download and install manually
@prassanna6521
3 жыл бұрын
Sir..can I use gnome desktop instead of server gui while installation?I am facing slowness issue while selecting server gui?what is the difference between these two sir
@TechArkit
3 жыл бұрын
Yes you can. Both installs same Gnome display.
@prassanna6521
3 жыл бұрын
@@TechArkit thanks for your reply sir..
@saipraneeth2681
5 жыл бұрын
Dear Sir, While attaching ISO file it will Showing "System not found " error. Please suggest me how to resolve the issue.
@TechArkit
5 жыл бұрын
Post the clear details of problem please.
@kadhumhamoud4828
4 жыл бұрын
Thank you for this great video. I did everything it it . every thing work good , but after rebooting server machine the ipa doesn't work . I don't know how I can troubleshoot this problem or what the service didn't start
@TechArkit
4 жыл бұрын
restart the services.
@kadhumhamoud4828
4 жыл бұрын
@@TechArkit what the service name?
@TechArkit
4 жыл бұрын
@@kadhumhamoud4828 IPA service you can check on the video itself
@kaushiksview462
5 жыл бұрын
my case "ipa-client-discover" not able to discover the details.
@TechArkit
5 жыл бұрын
Check IPA client configured correct and its should be reachable to IPA server.
@abhijith2525
5 жыл бұрын
Hi Thanks for the video LDAP server and Free IPA server are same ?
@TechArkit
5 жыл бұрын
No not same, however IPA server includes LDAP as well.
@vishnuprasanth9461
5 жыл бұрын
I am geting this error, please advise ipaserver.install.bindinstance: ERROR DNS Server 10.0.0.1: query SOA: THe DNS operation timedout after .... seconds ipapython.admintool: ERROR DNS Server 10.0.0.1: query SOA: THe DNS operation timedout after .... seconds ipapython.admintool: ERROR The ipa-server-install command failed. See /var/logipaserver-install.log for more information
@TechArkit
5 жыл бұрын
What your doing.? Let me the steps what your going to do.
@harivardhan8829
3 жыл бұрын
Present companies which redhat version they are using mostly
@TechArkit
3 жыл бұрын
RHEL 7.8 is mostly used now a days.
@harivardhan8829
3 жыл бұрын
Fresher can get a job as Linux admin
@TechArkit
3 жыл бұрын
@@harivardhan8829 Yes
@orazik92
5 жыл бұрын
On what base did you use 192.168.2.2 as DNS Server and Default Gateway? Have you setup a local DNS server on your network before? and what would I do if I don't have a local DNS server?
@TechArkit
5 жыл бұрын
I am using VMWare workstation as virtualization software in VMWare we have option called gateway and DNS IP mentioned. I have used the same as my DNS server IP.
@lowphilosopher
4 жыл бұрын
Sir I installed freeipa server/client and it worked but next day when I try to load ipa server in browser it didn't load the page and it says UNABLE TO CONNECT
@lowphilosopher
4 жыл бұрын
" ipactl restart " command does the trick
@TechArkit
4 жыл бұрын
Enable the service to start on startup so that it wont give you trouble after reboot
@RodrigoYamamoto
5 жыл бұрын
Excellent!!!!!
@TechArkit
5 жыл бұрын
Thank you.
@akhilachacko4070
5 жыл бұрын
Hello , In the file.repo After saving , I executed #yum repolist all I got an error " Cannot find valid baseurl for repo " What could be the issue ?
@TechArkit
5 жыл бұрын
its clearly saying there is no baseurl found, either there is no content in baseurl path or baseurl itself wrong.
@akhilachacko4070
5 жыл бұрын
I had an interview , 2 days ago . I cleared the written test and now , I have a group discussion / technical interview . The topic is DNS . Do you have any suggestions for , how I should prepare ?
@TechArkit
5 жыл бұрын
@@akhilachacko4070 use official documentation from Red hat its completely free and accessible.
@bhaumik17able
5 жыл бұрын
Hello sir, I'm getting error while I add baseurl. What I've added in vi file1.repo: [Bhaumik-DVDRepo] name=Bhaumik DVD Repo baseurl=///mnt/ enabled=1 gpgcheck=0 while I try to run "yum list all" command, I'm getting error as: Error parsing config: Error parsing "baseurl = '///mnt/'": URL must be http, ftp, file or https not ""
@TechArkit
5 жыл бұрын
Check Your repo config once again baseurl is wrong. baseurl=file:///mnt/
@bhaumik17able
5 жыл бұрын
@@TechArkit Thank you sir. Will try now and let you know. Does this setup help me in RHCSA practise as well?
@bhaumik17able
5 жыл бұрын
Hello sir I'm getting same error again. Command which I've entered: 1) [root@server ~]# cd /etc/yum.repos.d 2) [root@server yum.repos.d]# vi file.repo^C 3) [Bhaumik-DVDRepo] name=Bhaumik DVD Repo baseurl=file:///mnt/ enabled=1 gpgcheck=0 4) [root@server yum.repos.d]# cd 5) [root@server ~]# yum clean all 6) [root@server ~]# yum list all Output I'm getting as: Could not retrieve mirrorlist mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was 14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error"
@TechArkit
5 жыл бұрын
It's not the error about yum configuration it's an issue with your machine unable to reach internet, unable to resolve mirrorlist site. If you do not have internet delete all the yum config files from /etc/yum.repos.d/ and keep only one file which is local yum.
@jeffersonaizen
4 жыл бұрын
On RHCE, the two machines are in multi-user.target can i install [yum groups install "GNOME Desktop" ; Systemctl set-default graphical.target] will work ??
@TechArkit
4 жыл бұрын
Graphical.target would be fine.
@bhuvneshpurohit7101
4 жыл бұрын
Hello sir Facing error while installing ipa-client install
@TechArkit
4 жыл бұрын
May I know the more details about error
@bhuvneshpurohit7101
4 жыл бұрын
Sir i have successfully done ipa installation. It made some mistake before installing so rollback the machine again by snapshot & try to do same process & now its working fine thank you so much
@bhaumik17able
4 жыл бұрын
Hello sir I am getting an error in IPA server when I try to add IPA user. The error shows certificate error and not able to connect with server. I am using VMware workstation with RHEL 7.6
@TechArkit
4 жыл бұрын
Can you post the error details here.
@bhaumik17able
4 жыл бұрын
@@TechArkit is it okay if I will do that tomorrow morning?
@TechArkit
4 жыл бұрын
@@bhaumik17able No problem any time you can
@bhaumik17able
4 жыл бұрын
@@TechArkit I have almost installed lab. When I try to add : Step:1 - $ ipa user-mod --homedir=/nfshome/ldapuser1 Step:2 - User Login : ldapuser1 Getting error as: can not connect to ipa.mylabs.local/ipa/session/json : SSL certificate verify failed I am not getting where is this coming from
@ankurghadiyali3966
4 жыл бұрын
Hello, What would be the min Ram required to setup a lab. I have my system configuration like core i5 4th gen, 12 gb ram with 64bit windows 10 os. Would it be suffice for the lab setup?
@TechArkit
4 жыл бұрын
Minimum 4GB required for each VM. If it is RHCE you need three VM's.
@ankurghadiyali3966
4 жыл бұрын
@@TechArkit ok so my laptop supports max 16 gb. It means i can set it up.
@TechArkit
4 жыл бұрын
@@ankurghadiyali3966 yes, that would be enough.
@ankurghadiyali3966
4 жыл бұрын
@@TechArkit thanks...
@subratadas9283
5 жыл бұрын
During client side configuration at 26:30 minutes, you have set " GATEWAY as 255.255.255.0 ". I do believe, you have typed wrong value by mistake. But, it is an excellent video tutorial. It is my humble request to make second advanced part of this video. And, I have a question. Suppose I have installed IPA server in RHEL7 environment and my all client systems has installed other distribution of LINUX (Linux Mint, Arch Linux, Ubuntu). So, is it possible to use other LINUX distribution as client ??
@TechArkit
5 жыл бұрын
Yup your right Subrata das, you can use any other clients which are based out of linux. I am not sure about BSD based clients.
@subratadas9283
5 жыл бұрын
@@TechArkit Thank you Sir.
@bibindaviditsme
5 жыл бұрын
How to download RedHat 7.1? Do you have any link to download it??
@TechArkit
5 жыл бұрын
If you have red hat subscription then login to customer portal and download otherwise download Centos 7.2 for practice, which is similar copy as RHEL 7.2.
@kaushiksview462
5 жыл бұрын
hi sir i am getting error on DNS , forwarder dose not response
@TechArkit
5 жыл бұрын
check internet connectivity to your Linux machine.
@MrAssfucker29
4 жыл бұрын
You give rhce training ..online..I need
@TechArkit
4 жыл бұрын
Yes.
@MrAssfucker29
4 жыл бұрын
@@TechArkit how can I contact
@TechArkit
4 жыл бұрын
@@MrAssfucker29 Reach me over email aravikumar48@gmail.com
Пікірлер: 103