If zigbee2mqtt hardware does not show up in domoticz after this guide chech the last post in this forum topic: www.domoticz.com/forum/viewto...
items u need:
- raspberry pi, any would do
- cc debugger (aliespress:nl.aliexpress.com/item/326967... )
- zigbee sniffer stick: (aliexpress: nl.aliexpress.com/item/328522... )
- downloader cable: (aliexpress: nl.aliexpress.com/item/327674... )
links:
- zigbee2mqtt website: www.zigbee2mqtt.io
install mqtt (commands):
1. update the raspberry pi: sudo apt-get update && sudo apt-get upgrade
2. install mosquitto: sudo apt-get install mosquitto mosquitto-clients
3. make a mqtt user: sudo mosquitto_passwd -c /etc/mosquitto/pwfile mqtt
4. add a couple of rules to the config: sudo nano /etc/mosquitto/mosquitto.conf
4. add these rules: allow_anonymous false
password_file /etc/mosquitto/pwfile
5. save with these key combinations: ctrl+O and ctrl+X
6. open rc.local: sudo nano /etc/rc.local
7. put in before exit 0 the following: /usr/sbin/mosquitto -d
8. restart your pi: sudo reboot
install zigbee2mqtt:
follow the guide on: www.zigbee2mqtt.io/getting_st...
Негізгі бет Тәжірибелік нұсқаулар және стиль Setup zigbee2mqtt with domoticz including flashing!!
Пікірлер: 5