Sewing for Beginners Lesson 4: Never Install the Needle and Presser Foot Like This! | Beginner's Guide to Learning Garment Sewing | Learning to Sew from Scratch | Sewing | Threading a Sewing Machine | Sewing Techniques
Today, I'll teach you how to avoid common mistakes when installing a needle.
🔧 Steps to change the needle:
1️⃣ Raise the needle: Turn the handwheel or press the button to lift the needle.
2️⃣ Turn off the power and place a paper or cloth underneath to prevent the needle from falling.
3️⃣ Loosen the screw: Turn it one or one and a half circles, but not too loose.
4️⃣ Install the needle: With the flat side facing inwards, insert it vertically and tighten the screw.
🚨Note: The needle must be pushed up to the top of the needle bar, and do not tighten the screw too forcefully.
🔄 Changing the presser foot:
1️⃣ Remove the presser foot: Pull the lever, lift up, and press the button.
2️⃣ Install the corresponding presser foot: Align with the groove, lower the lever, and listen for a "click" sound.
3️⃣ Check: Ensure it is secure and adjust the needle position.
Негізгі бет Sewing for Beginners Lesson 4: Never Install the Needle and Presser Foot Like This!
Пікірлер: 1