On the job showing how to diagnose and repair a shallow well pump.
The home owner called out of water because the pump was not running. We found that the tank was waterlogged and the motor was humming.
- Draining the tank and correcting the waterlogg
- Testing the motor to see if it can be repaired
- Changing the Capacitor, Start Switch, and Pressure Switch
- Installing a Air Release and Snifter Valve for a Air Volume Control
"Here is a list of Parts you can buy on Amazon!"
All the parts listed are high quality OEM products, don't cheap out and buy from Home Depot, Lowes, or Tractor Supply stores those are cheap Chinese products that will cause more failures!
If your lucky to have a home town hardware or a feed store, you might find a pressure switch or air volume control. If you need OEM go to your nearest Water Well Supply company or seek a service call to replace the part.
These are my Affiliate Links to amazon, you get the correct part and i get a kickback from the purchase. - thanks for the support!
- you can get a Capacitor here for the 1/2 HP sta-rite pump
amzn.to/2IBwprO
- you can get a Capacitor here for the 1 HP sta-rite pump amzn.to/2rVzyMG
-You can get a Start switch from here:
amzn.to/2wXaFW3
- You can get a Pressure Switch 30/50 here:
Adjust the pressure to fit your system, but this is the most common setting.
amzn.to/2kakmag
- Or a 40/60 here:
amzn.to/2IAoDyn
Some items do not include prime shipping but the part cost is the same with or without prime shipping. Example part is 13$ + 9$ shipping 22$ a prime shipping part the same is around 22-24$
Негізгі бет Shallow Well Pump - diagnosis and repair
Пікірлер: 218