Hello from Mexico, this information is very good and very appreciated, smooth explanation and everything make sense, life is good because we have people like you Asif, I'm hopping to see more videos from you about power apps and power automate
@niklassimacek6424
2 жыл бұрын
Hello from germany, i really appreciate that you spend your time on creating this content! It is right what i looked for and I found no one else who explained it better than you. Hoping for more content from power automate :-)
@Cynikill
2 жыл бұрын
Hi, picked up this video thread after also watching Rezas - appreciate the time and detail you are putting into this as it really helps as I try and understand how to do this properly. Looking forward to going through the next videos in the series..
@1ZarakiKenpachi
10 ай бұрын
Outstanding explanation! Triggerconditions with AI is now more simplified ;)
@chrishudson8539
2 жыл бұрын
EDIT - Worked it out but leaving the answer for others :) Hi, any ideas where i've gone wrong? "The variable 'varApprovalEmailsArray' of type 'Array' cannot be initialized or updated with value of type 'Object'." My Expression is "outputs('Get_Approvers')?['body/value']?[0]?['Approvers']"
@prashanth2341
2 жыл бұрын
its awesome explanation
@Shmank
10 ай бұрын
Very clear tutorial. Thank you!
@Dimi0631
2 жыл бұрын
you are really good in teaching! thanks for helping :)
@rawandamin543
Жыл бұрын
Thanks for the informative video,
@melfleming6675
8 ай бұрын
Hi, this was well explained. Very easy to follow. Thank you! I have one question. How would one solve if they wanted to allow the submitter to select ‘Multiple’ department (Ex: IT and sales)? How would I call those action back in Power Automate so that both departments get the same email all at once?
@saojoaomeriti
2 жыл бұрын
Very good!
@elaizae17
4 ай бұрын
Hi, so happy to have found your video about having multiple trigger functions. I’m just wondering if this trigger condition will work if i’m just creating the item for the first time. Like for example, not having another flow that triggers it. Like, if upon creation of an item in my SP list where the StartWF is Yes and the Status is Pending. Will the flow still start?
@olaoladeji4600
Жыл бұрын
Thanks a lot Mr. Asif for this tutorial. The get approval emails section of the flow ran successfully without giving the output values for the varApproverEmailsArray. Could there be something I am missing sir. Appreciate your attention. Regards.
@asifrais5995
Жыл бұрын
The Best
@wyattparsons9799
Жыл бұрын
very nice video. I am running into a problem that my approvers cannot open the document. Do you know if there is a way around this besides opening up the library settings?
@shawkeme
2 жыл бұрын
thank you very much for you effort , if you please i have one question , what if I need Get approvers (Get Items) return more than one item (multiple selection Colum option )
@stevehearn8162
7 ай бұрын
Hi Asif, I need some specific guidance as I have a simple task yet for whatever reason after watching your very informative video, my simple brain still cannot crack the task of populating some Sharepoint list columns. What is the best way to contact you to discuss? Steve
@broodled
2 жыл бұрын
Great video Asif Sb. In case the approver is out of office, how will the automated flow function. Would there be any additional steps involved. Appreciate your guidance
@emmanuelasare3099
2 жыл бұрын
Hi, Asaf, I liked your approval steps very much. I have a question, where do i edit in the flow to let the flow move to a second person for approval when the first approvals have finished their approval like a manager? I don't want the manager to be seeing the request when others have not signed on first.
@mtamitolanga
2 жыл бұрын
Hi Asif, thank you very much for the videos. In my case approvers of the same document are from different departments therefore I'm trying to Create item in the Approvers List on the fly in power automate. I have a doc library where users upload docs and my flow is triggered When a file is created (properties only) and status = new >> Get file properties >> Create item in my Approvers List. The Approvers (multi select) field in my doc library does not populate through to my Approvers List approvers field however the ID does go through. I tried outputs('Get_file_properties')?['body/Approvers/Email'] but does not work. Please help. Thank you.
@bhujangaadapa7856
6 ай бұрын
Does the approval send requests in the sequence given in the approver person type column?
@alan_darr
2 жыл бұрын
In step #3 (Update Item), the Title field is required for me. That is not the case in your video. My list is a little bit different than yours but the main columns are there. Would the dynamic content be --> Get item: Title? That seems too simple and I'm not sure what it will mean down the line. Thx
@rawandamin543
Жыл бұрын
Would you please clarify what is the title type under the travel Approvals, I am having problem separating the email address of the Approvers. The problem is under Get Approvers Action, in Filter Query, the Dynamic content listed is only Department, I cannot find Department Value as it is under your tutorial?
@kumarvelu2920
3 ай бұрын
Hello sir. This is consolidated video. How we can integrate power automate with docu sign for the SharePoint list output. Kindly suggest your thoughts
@BrandonUttleygplus
2 жыл бұрын
Hi @Asif - is it possible to specify multiple departments in the requests form? For example - if 2-4 different departments (with multiple people each pulled from the Approvers list by departments) can all be assigned as Approvers.
@asifkhawaja
2 жыл бұрын
Hi Brandon, yes that can be possible. You will need to make the dept field on the form a multiselect dropdown and then in the flow you will need to iterate through each selected dept and retrieve the relevant approvers from the approvers list and save them in a variable or array to use them later for approvals. Hope that helps.
@emmanuelasare3099
2 жыл бұрын
@@asifkhawaja the columns I have doesn't give me the option of choosing a multiselect dropdown, it only give me choice option which only can take one choice not multiple. How do I get around it?
@crystalnichols385
2 жыл бұрын
I have the same question Brandon but none of this is working. :(
@tayongshakes8396
2 жыл бұрын
Good day sir i have an issue with start my flow on share point to start manually, when i click on Automate i don't see the option start Approval how do i go about it thanks ?
@gerardoes87
2 жыл бұрын
Hi Asif i have some troubles declaring the intitialize variable, when i place outputs('Get_items')?['body/value'])?[0]?['Aprobadores2'] it giving me an error, the column name is "Aprobadores2" and it has two person, aslo the Get Items i didn't change the name? Any clue on this error?
@tayongshakes8396
2 жыл бұрын
good
@abeeralshahrani148
Жыл бұрын
how did you creat the list in Sharepoint? did you upload an excel sheet or by using Microsoft list software?
@asifkhawaja
Жыл бұрын
Just created the list in SharePoint using one of the travel the list templates that Microsoft provides.
@ayazalikhan84
2 жыл бұрын
Hi Asif Sir , I really appreciate your efforts , one quick query, how can we link department(IT) column from the approver's list to main list?
@mirar1664
2 жыл бұрын
how can i trigger this from powerapps ?
@ExplorerheNorth
2 жыл бұрын
I seem to be hitting a wall here. When I write the code in to get the emails the flow fails. With the message below: “The ‘Varapprovalemailarray’ of type ‘array’ cannot be initialised or updated with the value type ‘object’. The variable ‘varapprovalemailarray’ only supports values of types ‘Array’ Can someone give me a steer as I have tried everything’s and it’s doing me head in.
@guigamerboy
2 жыл бұрын
I'm having the same issue
@ExplorerheNorth
2 жыл бұрын
@@guigamerboy I saved my work, removed the formula and refreshed all my connectors and it worked.
@lucashofer6550
2 жыл бұрын
Hi Ross, I’m facing the same issue. Could you please explain a little more detailed how to resolve this?
@asifkhawaja
2 жыл бұрын
@@lucashofer6550 Hey Lucas, I saw your email message as well. I am pretty sure there is a typo-mistake somewhere in the expression formulas that is causing this issue. (or you might want to try what Ross did above.) Please make sure that the data types of SharePoint list columns as well as the variables used in the flow are correct as shown in the video. And for the Value of the varApproverEmailsArray variable, please make sure that you follow the instructions from 22:55 to 25:55 in the video correctly. I made a mistake in the code which I corrected around 30:15. Please make sure you don't have that mistake. Hope that helps you, Sara and others too.
@krystianleano3149
2 жыл бұрын
Make sure that the Approver column is a multi select column. You still need to configure that the column is a multi selection person or group
@sanilschithambaran7268
10 ай бұрын
Thank you so much Asif, a great series with complete package of scenarios. Looks like you did a detailed study of the requirements prior to prepare the 4 parts of these videos, Amazing. I have a query about the final output " Save As PDF" button which will be part of the Approved notification. Is it possible to download the PDF automatically after the approval. Please share your email id if I need to send the screenshot. 2nd query about how to Reassign the workflow if the approver is not available.
Пікірлер: 44