Wow, sure wish I had seen this video a couple of days ago! I had the exact same problem with my Sharp MX-M200D. It would have really helped. Had to figure it out on my own. It looks VERY similar inside. The collar on the resistance roller was broken the same way. I used a gel Super Glue to glue it back together. I see that this part is actually pretty easy to get (it must break for a lot of people). Kind of a time-consuming job taking things apart, and putting them back together. My machine is about 14 years old, so I cleaned and lubricated the gears while I had it apart. I wish I had also changed the fuser drive gear, while I had it apart. That gear is starting to wear out on my copier. As part of this repair, I also took apart the fuser, replaced the rollers, bearings and gear on that unit, lubricating the bearings. Machine works like new, again. Keep thinking it's time to replace a 14 year old machine like this, but I've been able to keep it running, so far.
@mobyko20
3 жыл бұрын
Ayus na ayus talaga son ang pag aayus mo ng printer katulad nyan Yung mga papel na naiipit at napapa gana mo ulit. Keep sharing.
@jaytechpinoychannel
3 жыл бұрын
Thank you 😊
@genglangga2614
3 жыл бұрын
Galing mo tlga boss gnyan pla itsura sa loob oh may nakaipit na paper kailangan tlga e check minsan
@jaytechpinoychannel
3 жыл бұрын
Salamat ☺️ geng
@adyavlogslifestyle
3 жыл бұрын
ang galing nman po ser salamat sa pag share ng inyong kaalaman wala po akong alam dyan pero ngayon may mga natutunan ako dahil sa video nyo
@jaytechpinoychannel
3 жыл бұрын
Thank you 😊
@merdum9861
3 жыл бұрын
yan ang dati kong hawak before ako mag ibang bansa galing mo sir
@goodymiyo199
3 жыл бұрын
galing talaga idol marami na akong nalalaman sa mga vid. mo laking tulong talaga.
@jaytechpinoychannel
3 жыл бұрын
Thank you 😊
@YopilBuddy
3 жыл бұрын
galing mo pala umayus ng mga printer boss salute
@jaytechpinoychannel
3 жыл бұрын
Salamat bro
@viralshortvideosOfficial
3 жыл бұрын
Yun mismo to bro, solutionnpara sa paper jambsa printer👏👏
@jaytechpinoychannel
3 жыл бұрын
thank you
@dannyarcadio7865
Жыл бұрын
New subscriber here, maraming salamat sa info video kabayan.didnt skip ads 😊
@leahinde6576
3 жыл бұрын
sana all marunong gumawa,full watch done..
@yanrams03
3 жыл бұрын
Very good video.. Worth to watch.. Ang galing talaga Jaytech..
@jaytechpinoychannel
3 жыл бұрын
Thanks for visiting 😊
@joandutch8003
3 жыл бұрын
Start na ako sa pa harang kuya Jeytech.. galing mo talaga sa mga ganyan kuya
@atedhing6685
3 жыл бұрын
Ang galing linis ng pag ayus matagal din pala bago mabuo
@samirmughal617
7 ай бұрын
Superb job
@MyraAzucena
3 жыл бұрын
hi jay thank you for sharing tips on how to remove paper jam I like the content and will follow your channel
@jaytechpinoychannel
3 жыл бұрын
Awesome, thank you!
@ruyaal
2 жыл бұрын
I have a ARM 205 with exactly the same jam in the upper tray. I followed your excellent repair and good camera by the way. I had exactly the same part broken and was able to repair. My problem now is that only copies half the page. Any suggestions?
@jaytechpinoychannel
2 жыл бұрын
half copies problem check the coil or re insert properly the drive gear
@ruyaal
2 жыл бұрын
@@jaytechpinoychannel Ill have to do it over. I wonder if I moved the gears while cleaning? Thanks for your help
@suryak5843
3 жыл бұрын
Thank you so much for you ❤
@chandruchandru2168
7 ай бұрын
Thanku
@AnneVentyurs
3 жыл бұрын
good skills you have watching here
@jaytechpinoychannel
3 жыл бұрын
Thank you 😊
@AlternativeTongue
3 жыл бұрын
Very informative video. Keep it up sir.
@jaytechpinoychannel
3 жыл бұрын
Thank you 😊
@jaytechpinoychannel
3 жыл бұрын
Thank you 😊
@jayhenrymojica1238
7 ай бұрын
Sir new subscriber.. Sir ask ko lang un sa model Ar 5620N pag open p lang nka jam na agad pero wla na papel ano po posibleng sira thanks
@jaytechpinoychannel
7 ай бұрын
check mo mga sensor yung dinadaanan ng papel sa ilalim at sa taas at yung mga kuntil nya sa sa mga sensor may papel yan na mallit siguro na naka jam diyan
@jayhenrymojica1238
7 ай бұрын
Maraming salamat sir
@lorelladellabella1807
3 жыл бұрын
Hi, paper gets stuck in my printer too: I followed your instructions step by step. I have unfortunately verified that my problem is not the spare part you repaired because mine is intact. in your opinion what is my problem?
@fifitkurniawan
3 жыл бұрын
what is the two paste you use?and for glue or lubricating function? thanks before
@jaytechpinoychannel
3 жыл бұрын
I can use epoxy paste
@gladisoktavia7038
3 жыл бұрын
thank you
@Marnave47
3 жыл бұрын
Good job sir
@jaytechpinoychannel
3 жыл бұрын
So nice of you
@sirajsgc
3 жыл бұрын
too old machine my aalso same problem?
@TECHWOOLF
3 жыл бұрын
Awesome big like here ;)
@jaytechpinoychannel
3 жыл бұрын
Thanks 😊
@user-oj3nl1oo8v
2 жыл бұрын
can I get the basic driver of Sharp AR5316 for windows 7 64 bit
@jaytechpinoychannel
2 жыл бұрын
you search google i think its available
@asdgat69
3 жыл бұрын
عند خروج اول ورقة ترجع نفس المشكلة بعد صيانة الترس
@cacfasfadd8546
3 жыл бұрын
selamun aleykum I have a Saharp 5618 machine. I am constantly getting a paper jam warning even though I have cleaned the unit and there is no problem in the paper tray. How can I get rid of this warning?
@jaytechpinoychannel
3 жыл бұрын
check all sensor maybe they small paper or check the position of actuator maybe misaligned.
@AnneVentyurs
3 жыл бұрын
wow thanks for this
@jaytechpinoychannel
3 жыл бұрын
Thank you 😊
@saeidshariati5103
3 жыл бұрын
A copy with the same model that I turn on makes a paper jam. I mean, pressing the power button makes an error. You can not guide me,plz?
@jaytechpinoychannel
3 жыл бұрын
you can check fuser gear or solenoid gear maybe they have damage.
@manjunathbhimraobiradar7872
2 жыл бұрын
I want AR5316 sharp Xerox machine CD drive
@jaytechpinoychannel
2 жыл бұрын
you can try download in google
@irshadalisyed7712
2 жыл бұрын
Two problems 1. Start switch doesn't activate to process any operation. 2.doesn't pickup paper from tray for print 3. auto reverse photo copying doesn't carryout...
@jaytechpinoychannel
2 жыл бұрын
sir you need general cleaning your machine and replace consumables parts if you dont now how to repair, call service technician near your city
@ikawlang5477
3 жыл бұрын
Margie Cajes here dikit po sau
@jaytechpinoychannel
3 жыл бұрын
thanks
@annieventuresofficial1995
3 жыл бұрын
ang galing naman //silverkaventuresmembers overnightplayallperks support
@jaytechpinoychannel
3 жыл бұрын
thanks you
@irshadalisyed7712
2 жыл бұрын
Start Switch not working
@annexplores3933
3 жыл бұрын
Sir. Ask ko Lang. Di ko masyado ginagamit printer ko. Possible ba Yan na maging dry ang ink at Di na sya gagana.?
@mobyko20
3 жыл бұрын
Di naman Ganda.. as long as Naka Tago NG maayos at safe.. Or Naka lagay NG maayus is Maga gamit din sya ulit.. About sa ink di Yan mag d dry charoot.
@jaytechpinoychannel
3 жыл бұрын
Yes maam possible na mag dry sya palit ka nalang ulit ng ink nya
@katambayAnne
3 жыл бұрын
PL here kapatid
@jaytechpinoychannel
3 жыл бұрын
thank you
@samhoonmhmood5938
3 жыл бұрын
the problem on minte 17-30
@faisalalabssy1338
3 жыл бұрын
عشر دقايق نشاهد عمليه حشر الاوراق في الكاسيت ولم تقوم بتنظيف السنسور وربلات سحب الاوراق بل قمت فتح زجاج الاسكاينر و هذا يعد استخفاف بالمشاهد وتضييع للوقت
@meymey8797
3 жыл бұрын
Hello po simulan kita here kalerski vlog po
@rubyscupoftea8674
3 жыл бұрын
Mar9 magdamag po ulet
@joandutch8003
3 жыл бұрын
Wala akong alam sa pag gamit ng printer kahit meron kami nyan
Пікірлер: 81