I just followed this. Incredible. Old blades now work better than the new blades I just ordered for my Phillips Norelco 9000. I salute you, Sir.
@baklash1762
Жыл бұрын
I have a Norelco 8240 that I’ve had for many years and sharpen like you demonstrated. I always first degrease the blades and foils by soaking in rubbing alcohol. And I make sure to keep the same blade and foil matched together. I’ve used Norelco since I was 16 years old because the first time I ever shaved my older brother let me use his. I’m now 80. I once tried a non-rotary blade shaver but hated it.
@baklash1762
Жыл бұрын
@Caballo de guerra Braun. Don’t remember the model. Years ago.
@joescheller6680
Жыл бұрын
Your razor is same model number as mine it's an xl. Floating heads really like the razor. It's over 30 years old I believe has original battery in it yet. Holds charge for a week. Trier others like Brawn and a Wahl the screens didn't last 3 months.
@baklash1762
Жыл бұрын
@@joescheller6680 Yep, mine still has the original battery also. Just wish I could buy some good replacement blades because sharpening these will eventually wear them out. Also, not sure if the very expensive new models are any good. One thing I know for sure is that when this one finally bites the dust I will buy another Norelco rotary.
@OneIroNauT_1
Жыл бұрын
He's been using that old corded razor for years, but never bothered to take the thrift store price sticker off it. What a true gentleman. Other then that obvious embellishment this was a fine video. Newer electric razors never get a good blade back, they dull almost immediately, and will corrode faster as the coating is scraped away. Nothing like infected razor burn\bumps from a dull electric blade.
@dogmaticagnostic7716
2 жыл бұрын
There is a far better way... first, thoroughly clean your blades (yours were gross) then add some toothpaste to the outside of the razor blades and run for 30 seconds. Thoroughly wash the razor head and voila! Sharp blades.
@xcloudx01alt
2 жыл бұрын
omg thank you! My Philips 9000 series is working better now than it did when it was new. I even tried it on my body hair trimmer and now that works super well too. Crazy how simple this solution is and how well it works 😍
@Sheepdogs56
2 жыл бұрын
This is sorcery ! Absolutely Brilliant with a Capital B ...Beers for this man, and keep them coming!👌
@highwaystar3780
2 жыл бұрын
Yeah well, at 56' I basically gave up on electrics having owned everything out there. Till about a week ago anyway. I destroyed my face with a manual shaving few days premature. I was furious. That night I started my quest for an electric again. No way was I gonna pay $300 again and throw it in the trash. I reluctantly got a $50 Remington f5- 5800 on ebay. Holy shit. Not only is it first razor Not giving me Burns, irritation and Bumps. But its so delicate, yet shaves so close, even after shave hardly stings my face. AND, I can shave at least every Two days whereas I could only do so Once a week for past 40yrs because of my extremely sensitive skin. Don't know how long this will last as I have terrible experience with Foil shavers imparticular. But for now...it's a miracle!!
@acw2237
2 жыл бұрын
Should I assume to push the toothpaste inside?
@acw2237
Жыл бұрын
@Hide in the Shadows Hunts won't work?
@SFBenjaminK
Жыл бұрын
I use Tooth paste or BETTER Metal polish paste like Flitz Multi-Purpose metal Polish or Blue Magic 500-06 Metal Polish Cream for years ..works GREAT 2👍
@alexplorer
2 жыл бұрын
Wash everything first! I regularly blow out the fine particles with compressed air, but I de-grease everything by disassembling the head, washing it once to get the gunk off, then swirling the screens and blades in rubbing alcohol.
@stephh7079
4 ай бұрын
2021 saved my blades in 2024 :) Many thanks !! It works fine.
@elmacho7561
3 жыл бұрын
Awesome! I have done this many times with the same razor you have: hq2, it does work great as the profile is entirely FLAT. The problem is that new blades hq8, hq9, sh30/52 et. al. are being designed with a convex like shaving profile, making it almost impossible to do this very same technique. I watched a guy (Robert Veach?) YT video using plain toothpaste (silica gel) by pouring it onto the top of the blades without them being taken out, after having washed the blades with soap, and then by running the shaving machine for some seconds, blades down, on the palm of his hand to recover the polishing liquid. This seemed working perfectly fine. I do think you can do the same with diamond paste, white paste, polish, compound and EVEN BRASSO! As you are sharpening the blade against the foil it fits perfectly the curve; just be careful to not finish sharpening away the foil as it is very thin.
@stephenj.p.ingley4033
2 жыл бұрын
Perfect...Thanks for sharing. JP. Norelco 710X...12 years old now.
@SG-28948
Жыл бұрын
Astonishing. It really works and, becase I had stones already, completely free.
@phsx2890
Жыл бұрын
What kind of grinding stone? How much does it cost and also for honing
@joescheller6680
Жыл бұрын
You must not interchange the foils with different blade they wait in together changing them will not be a good match..try to keep them matched while taking out of the head.
@07roadking43
8 ай бұрын
I use a pc of float glass and flitz metal compound if they are real bad ill use my diamond paste first then flitz, good luck !!!!🍀
@jeremygreen72414
Ай бұрын
These comments are off the chain man.Great video I mean, honestly, thanks for you know, taking your time out and um showing us how to do this, but my question is, does it matter how course to sharpenstone is?Does it need to be kind of a smooth sharpening stone or what
@bruceallen6016
Жыл бұрын
Well shoot, now you tell me. I have an older Norelco 7310XL that still works fine but just bought a Norelco 3800. Armed with this new knowledge I will try to sharpen the older one. Thumb up for the info. 😎
@patrickstockton2091
Жыл бұрын
Thank you for the information!,the cheap ones felt like I was using my 'ol ladies tweezers, OWWWCH!!!
@mrjcbuc
2 жыл бұрын
I have one of those bald head shavers. Does your technique work for them, or do I do the toothpaste?
@robertbolding4182
Жыл бұрын
I've been doing this for years the only time I buy a new when the batteries go dead it won't charge
@josephmisener1859
3 ай бұрын
In a Norelco triple header... Always keep the blade with the same screen...
@andrewwilks5155
2 жыл бұрын
Thank you! For I got some dull razor blades.
@themaster8387
Жыл бұрын
Been doing this since the 80s. My only problem is the foil wears out . I use Arkansas stone wet.
@saeednouri6032
4 ай бұрын
My shaver(philips) rotate but doesn’t cut (one of three )
@josephskuse9115
10 ай бұрын
Can you make a video on how to sharpen the blades on a Tac Shaver?
@terryswan6978
Жыл бұрын
I Love Christine a world above Kotex!!!!
@schbrachbolidsei
Ай бұрын
My underarms are now as smooth as a baby buttock, but my beard grows.
@rafaelserur6584
11 күн бұрын
😊 cool!
@LouisM-nt9jf
Жыл бұрын
Where do you get these stones
@panthercatmw
5 ай бұрын
Do not do this on a Philips 7000 razor. It will render the head useless.
@mrjcbuc
2 жыл бұрын
Where do you get those stones?
@jodygwiinn1233
5 ай бұрын
Tool shop orderfine or rough one side fine other side for flatting table between set up bemust be sure wipe lint off is .oo3 think on perfect o tolerence must have set up perfect for highend miliion dolloar molds
@jodygwiinn1233
5 ай бұрын
Oue diamond dust and carbide dust inexpoxy poured left over in skoal was abrafader mold the diamond carbide shaperd mold in k erosene used til edm elec dis charged .003 hard aurface caused mold to crack out but nadr millions till figured out we a say polish off hard surface but after years no more execuses we make entire mold out out graphite burn to shape orbit the size grapghite undersize 360 orbit to size.oo1 or .003 was great saving on carbide tooling good days goon now
@sam9242
3 жыл бұрын
Doesn't work quite as well on newer curved blades
@elmacho7561
3 жыл бұрын
Problem fixed with toothpaste. Read my last comment and you will see how.
@richardcrow6465
3 жыл бұрын
Why in the before & after 0:35 - 0:45 do you show the before blades being held one way in the before but hold them the other way in the after? why not show them both the same way? compare apples to apples
@9384763
Жыл бұрын
Great video but what are you sharpening the blades on? Thanks!
@JohnMurphy-e6q
7 күн бұрын
why not just put the blade on the razor, turn the razor on and let the razor sharpen the blade against the stone.
@cumshot247
3 жыл бұрын
Do you always have to go in a clockwise circle?
@hbeezey
2 жыл бұрын
Username checks out. Why don't you take one of your 10 hour coom sessions and read a book.
@cumshot247
2 жыл бұрын
@@hbeezey You're either a woman or gay...
@georgegretser2178
2 жыл бұрын
South of the equator go counter clockwise, just like water. Haha
@hbeezey
2 жыл бұрын
Brother please stop sticking it into your thumbnail, you are hurting me.
@MrAbeebaby
2 жыл бұрын
Makes perfect sense to me. That's how I test if my fishing hooks are sharp. Exact same idea.
@phsx2890
Жыл бұрын
Didn’t work…it did feel sharper and it “stuck” to fingernails but didn’t cut facial hair much
@madaxe4199
Жыл бұрын
more practice
@joescheller6680
Жыл бұрын
Keep trying maybe didn't give enough time to get the edge right
Пікірлер: 63