As a complete knife dork and knife maker, I feel like the Tumbler style sharpeners have their place. They're not going to give you the best edge but they're going to give you a better edge than a pull-thru and, for people who don't want to learn freehand or spend the money on a guided rod system, at least they will have a pretty fool-proof way to keep their knives functional. I'd rather people use this than have a kitchen full of knives so dull they're almost useless.
@KnifewearKnives
11 ай бұрын
Absolutely, well said!
@tomgreen2058
8 ай бұрын
This is a great take and it's exactly why I bought a Horl 2. I've got a bunch of little kitchen things I obsess over... Coffee, smokers, sous vide, the list goes on!... I don't need another thing to add to the list! This lets me get decently sharp blades and it's always on hand. Importantly it doesn't need soaking or plugging in to power so I can just reach for it at any time.
@christianscherm7360
4 ай бұрын
Agreed! As a moron with too many hobbies as it is and cooking being the hobby I think I'll use a tumbler system on my Victorinox to keep it safely cutting before I have to get a new one.
@knownaigm
4 ай бұрын
@@christianscherm7360 Add a cheap or DIY strop to that and you'll get an even better edge too without needing any really technique or skill. Should be good to go.
@roydunn4649
4 ай бұрын
Not as sure. The Hori system goes to 6000 grit and comes with a strop. Pretty sure you could get a very nice edge with it
@wrtlprmpft2
11 ай бұрын
I would have used the Tumbler alternating between left and right with fewer and fewer strokes (same stroke count per side though) which is what many do to deburr on a whetstone, too. However, the 45 second sharpening deserves a black belt, well done!
@jmcarreiro
9 ай бұрын
I just got my first whetstone yesterday (shapton kuromaku 1000) and of course I had a lot of difficulty with maintaining a proper angle. I managed to make the knife pretty damn sharp though which is all that matters since it's a pretty cheap kitchen knife. It also took me about an hour but I'm still not fully satisfied. Once it starts losing it's edge I'll practice some more of course! I'm also going down the rabbit hole of knives and sharpening now haha. Once I have more experience with sharpening maybe I'll think of upgrading.
@KnifewearKnives
9 ай бұрын
Hey, congrats on your success! This video may be helpful: kzitem.info/news/bejne/2X2vmpyNiJGjh6wsi=tiRAF-17qt27S3UF
@90sumbeats7
11 ай бұрын
Nathan making the knife hug the curb was the highlight of my day
@barcham
4 ай бұрын
I had considered getting a tumbler but hadn't found a decent objective test that I trusted until now. This is the best review/test of that type of sharpener I have ever found and, personally, I will stick with my whetstones. I have become really used to sharpening that way after a few years, and now I even sharpen knives for a few friends and neighbours. Every couple of months, I'll ask my friends how their knives are doing, and if I can get a few who need work done, I'll spend an afternoon with my whetstones sharpening and honing a bunch of knives. For some reason, I find it very relaxing and I really enjoy it! 😄
@KnifewearKnives
4 ай бұрын
I'm glad to hear it, keep up the good work!
@willparsons32
Күн бұрын
What an incredible review by you both! A REAL 'no bars hold ' review and that's what alot of people want when it comes to dealing with ones' investment in knives. I was actually mindset on purchasing a tumbler type sharpener but you made a really good point about the dangerous possibility of slicing ones' hand open trying to re-arrange the position of the knife whilst attempting to get the edge right. The unnatural hand position of it holding the block that holds the knife while trying to concentrate on getting the tumbler (sharpener) consistent to the edge of the blade just doesn't seem right. Regardless of which choice one makes to sharpen their blades, I think as a beginner, one should first practice on a cheap knife from the buck-or- two/Dollarama store first before attempting to grind their $80+ blade.
@KnifewearKnives
11 сағат бұрын
Thanks for the love! Yes, remember to practice BEFORE trying to do any of your expensive knives!
@jasonbalester3217
4 ай бұрын
Appreciate the video comparison, honest and practical.
@jsomogyi88
11 ай бұрын
Thank you guys for this helpful comparion video, actually I was hesitating getting one tumbler sharpener just out of curiosity, even though I'm a very satisfied user of shapton pro stones. It seems there's no royal road in sharpening, you get what you give :)
@sleepyowl4585
24 күн бұрын
I’d like to share my thoughts on the video. While the information provided was very valuable, I felt that Tiffany dominated the conversation, leaving little room for Naoto to respond or provide any critiques. I would have loved if there had been more interaction and feedback from Naoto as well. If one presenter is more experienced, and the other is still learning, I think it would be more effective if the less experienced presenter was more open to instruction and constructive criticism, as this would also help those of us who are watching and learning at home. Aside from that, I very much appreciated the video! Thank you both!
@KnifewearKnives
23 күн бұрын
Thank you for the feedback! That may also be a result of the editing, I appreciate you bringing it up.
@sleepyowl4585
23 күн бұрын
Thank you for your response. I apologize if my review seemed overly critical. 🙏🏽❤️
@user-yt2rq8qn3l
3 ай бұрын
Amazing review! Thank you so much! The beginner/expert side by side is a great idea to get the best perspective.
@KnifewearKnives
3 ай бұрын
Thank you!
@birddog0
Ай бұрын
That man is my hero. I will strive to sharpen as he does, and one day I will polish my katana on whetstone.
@SatchmoBronson
11 ай бұрын
I like that you called out the height of the knife towards the end. I suspect the roller thing would be completely useless with a Chinese-style cleaver (which I use often and love dearly). Whetstones are just so worth the time investment to learn how to use, because you can sharpen anything with them.
@l26wang
10 ай бұрын
Not that I’m a fan of ip theft, but for tall blades you just need to lift the roller with a thick book or something.
@tailstalker
11 ай бұрын
I mean, in Japan you have a house stone. That's the final word. You quickly sharpen up on the house stone, then maybe strop on whatever you're wearing and it takes no time at all to repair an edge. I can't see these roller things replacing that. The biggest issue with the roller (outside the price, durability concerns, and lack of flexibility) is that I just don't think it's really able to DEAL with any heavy sharpening jobs. I get people coming to my booth every week to get knives sharpened to desperately need the sort of fixes that one can only do quickly on a 200 grit stone. I even have an 80 grit stone that I will do heavy metal removal and tip repair on. The sorts of chips and damage people put in knives aren't going to be repaired by a tool like this.
@mikeobrien4081
11 ай бұрын
The price of that roller sharpener is wild. It costs about a third more than a WorkSharp Precision Adjust, a guided angle reciprocating arm sharpener that comes with 3 grits, is infinitely adjustable between 15 and 30 degrees, and is safer to use. And the WorkSharp is way more versatile and gives better results. The Tumbler might help to grind at a consistent angle (within a narrow range of blade heights and profiles), but it looks like it makes deburring more awkward, which is like a golfing aid that drives for you but can't putt. Tiff has a great vibe on camera!
@Cid_1
10 ай бұрын
I would like you to do a video on the Horl system as well. I think that will do better as it can come with several attachable diamond & ceramic grits, and I heard it's better than the Tumbler. Could be a fun comparison video in the future.
@KnifewearKnives
10 ай бұрын
Absolutely!
@tobiasb4352
10 ай бұрын
same 🙋♂just saying... @@KnifewearKnives
@hello.itsme.5635
10 ай бұрын
As far as I know the Tumbler is just a copy of the Horl. Don't know how this is possible legally.
@Brucelabvideos
5 ай бұрын
Absolutely agree with you on this. The Horl system is THE original roller-type sharpener, so I believe that would be a more appropriate comparison. I don't have a particular preference either way, that's just my initial thought.
@jarrett754
10 ай бұрын
Check out horl sharpeners. They were doing this before tumbler and have much more refined higher end products that tumbler. I’m gonna be buying one in the near future
@KnifewearKnives
10 ай бұрын
Awesome! We were aware they were the original, so we'd love to give one a try.
@paulcantshutup
2 ай бұрын
I don't know anything about this channel, but I like knives, and I love your rapport. Subbed.
@KnifewearKnives
2 ай бұрын
Thank you!
@darkt0st00
4 ай бұрын
watching him sharpen a knife makes me wish i knew how to do it that fast.
@KnifewearKnives
4 ай бұрын
It just takes 15 years of practice 😅
@juanjauregui7164
7 ай бұрын
Thank you. I was just about to buy the tumbler system, but not anymore .
@KnifewearKnives
7 ай бұрын
Glad to help!
@sgtslaughter54
6 ай бұрын
It took me a couple of uses to get comfortable with the Horl 2 barrel sharpener, but once I got it down it takes me about 5-10 minutes to tune up several knives (kitchen and pocket) sharp enough to shave. I do that to all of my knives every month so I've gotten a fair bit of practice. The first couple of times it was a bit awkward. I used to sharpen woodworking chisels on whet stones so I know how to use them, but this all fits in a little box in my cupboard, takes minimal counter space, and the whole process is so darn quick.
@KnifewearKnives
6 ай бұрын
We gotta give the Horl a try!
@sgtslaughter54
6 ай бұрын
@@KnifewearKnives Honestly, I'd say just practice a bit with the tumbler and know that the disk is about 2000 grit (something I just learned myself). It won't bring a knife back to life like a stone, but it's good for a quick tune up.
@glennvelonio8279
5 ай бұрын
great murneng both of you... I really thankful to see your videos especially learned how to sharpen... many people will learned and use their jobs.... especially to my country here in the Philippines... and also me because I am a butcher deboner..... thank you very much I will to other people here.... I wish some we will meet you in person! by God grace.... I call you now my mentor even in the Internet will see... but very useful and helpful.... knife for the people.... 🔪🗡️❤️❤️❤️🙏🙏🙏
@KnifewearKnives
5 ай бұрын
Thank you!
@douglastong5020
11 ай бұрын
Naoto just did a Naruto run on that knife. Crazy fast sharpening!
@miguel154525
11 ай бұрын
The roller looks sus, we been knew that. Ive used both. For home use, sure the roller is okay. As a professional i wouldn’t trade my wet stones. There’s weeks where my knife needs a quick pass on the 4k and sometimes i have to rework my edge. Not to mention the variety of knives like single beveled debas, or long and skinny sujihikis. I would highly recome anyone that is serious about having sharp knives to invest the time and money on wet stones.
@dintelignt
11 ай бұрын
I've been waiting for this review. Thank you guys!
@KnifewearKnives
11 ай бұрын
Happy to hear it!
@Bluekattoo
7 ай бұрын
I have that album, love Tom Waits.
@briw4647
4 ай бұрын
Nothing beats a whetstone sharpening done right. Nothing. The issue is many cannot do it right, with inconsistencies and differing angles. Sharpening systems are great for beginner and intermediate
@kanwalshafiq6197
Ай бұрын
But tumbler has beaten the whetstone
@zimmmerit6308
11 ай бұрын
I Love how he helps her with bottle of water )))
@SLSAMG
11 ай бұрын
Stone sharpening all the way! I find it very therapeutic.
@SalVitroNY
11 ай бұрын
Love Naoto he so cool 💯
@einundsiebenziger5488
9 ай бұрын
... he is* so cool.
@NateNakao
Ай бұрын
I feel like any review of the Tumbler should be followed up by a review of the Horl 2. The Horl is vastly superior to the Tumbler in every possible way. From the much lower grit and the ceramic honing disc to the longer magnetic block size and much stronger magnet to the overall fit and finish, the Horl really deserves to get a proper comparison to its knockoff sibling.
@KnifewearKnives
Ай бұрын
They sent us one to try, well try to test it soon!
@alanlambayan7278
8 ай бұрын
Try and use even back & forward motion start with ight Presser as the sharpener bits the knife blade edge add more presser with each Push or Pull motion Keep count on each pass..i hope this help...O...try Circles..in a Slow Motion.....
@tomgreen2058
8 ай бұрын
Those tumbler sharpeners do actually have a small learning curve, you do have to inspect the blade after you do a round of sharpening; you'll probably notice you have to spend a bit longer on certain parts of the blade. Also, once you're maintaining a blade rather than going from completely dull it's much, much quicker.
@gregmccormack5709
11 ай бұрын
It did what I thought it would..... limited functionality in a single grit.... 🤷. I'll continue investing my time/money improving my Stone technique✊️🤪👍🏻
@funkbungus137
8 ай бұрын
45 seconds pfft, I've mastered the 0 second method, bandaid companies love me. For real though, that's a practiced hand
@jks3190
7 ай бұрын
Not related to the Tumbler, but you should try taste testing foods cut by rough edges vs fine edges. Its very noticeable on tomatoes, but finer edges make food taste better (not just mouth feel) It'd be cool if you guys can do a video on this topic.
@KnifewearKnives
7 ай бұрын
Absolutely!
@einundsiebenziger5488
9 ай бұрын
To me, those roll sharpeners make no sense for several reasons. 1. they are expensive 2. they are big, thus requiring more storage space than a diamond plate or whetstone 3. they only give you two different angles. 4. you operate them with the cutting edge of the knife facing up 4. you need both hands to hold them steady, one pressing down the sharpener so it actually rolls and does not slip, the other to press the magnetic holder against the roller 5. it requires practise to get one smooth, consise movement and sharpen the edge all the way through. Just slapping you knife on a cheap, double-sided whetstone and "scratching" along takes the same effort, if not less, saves money and storage space in your kitchen drawers.
@barashkaz
11 ай бұрын
Thanks for this! Maybe one day try the horl 3k / 6k stone upgrade please!
@KnifewearKnives
11 ай бұрын
It definitely sounds like a better system!
@irvchan
3 ай бұрын
Thoughts on the Work Sharp Ken Onion belt sharpener compared to these?
@KnifewearKnives
3 ай бұрын
I've never tried it, but I've heard good things!
@mcbrite
5 ай бұрын
I spent like 400 Euro on a used 1500 Euro Wicked Edge set, the only money you'll ever need to spend and, more importantly, the LAST money I ever need to spend on sharpening...
@roydunn4649
4 ай бұрын
The Horl is more $$$ but a WAY better system.
@josecbm89
4 ай бұрын
Not much, it has the same problem with the tips, it's prone to flatten the curve of the knife, it can't be used for thining or single bevel knives and the small surface of the abrasive needs to be replaced frequently
@alfdom51
5 ай бұрын
The price of stones has been dropping. I would rather buy a knife for the price of that sharpener. It takes ten minutes to learn how to sharpen a knife. It takes about 3 hours to train yourself to use a whetstone. I have a drawer full of cheap sharp knives. I will be buying a strop soon. I may buy a high end knife after that.
@seanmcgrath1326
Ай бұрын
Can you tell me what grit of stone you both used? I heard up to a 1000 grit? Thanks.
@KnifewearKnives
Ай бұрын
It all depends on the knives! Minimum 1000 for finishing but you can go higher too!
@Gonzo4osu
15 сағат бұрын
The tip is harder?
@KnifewearKnives
11 сағат бұрын
Just a little easier to break because it's so thin!
@Xbox360gamer5000
7 ай бұрын
the tumblr u use if you still got a kind of sharp knife to get it good again. it's not for setting up a new Cutting edge after absolutely demolishing the blade on the pavement.
@anthonyfranco7559
10 ай бұрын
I would lo e to stone sharpen my kitchen knives, but they are expensive. I love the knife sharpening tool to help you with the angles. Where did she get that from?
@KnifewearKnives
10 ай бұрын
We carry it! knifewear.com/products/tojiro-togi-grip-sharpening-clip-f-443 We also found that the prices of a basic set of whetstones is about the same as the gadgets!
@ManhNguyen-me8bj
6 ай бұрын
Tumbler doesn't work because you are grinding the metal in itself .... where with wet stones you are pulling the metal away from knife
@ManhNguyen-me8bj
6 ай бұрын
Maybe tumbler workers if you roll one Direction and reset from bottom and roll and reset will give you better Result. So pretty much roll up on 1 side and on the flip side roll down
@richardkenworthy9312
6 ай бұрын
Why didn't you use the steel on the other side of the roller
@KnifewearKnives
6 ай бұрын
Hey, Tiff does at 7:40 and Naoto does around 13:20.
@888SpinR
11 ай бұрын
Could you explain how the Tumbler and similar products aren't simply a pull-through sharpener in a different package?
@knownaigm
11 ай бұрын
The tumblr is actually acting on the steel in the same way a stone would, by abrading away steel from the side of the bevel. Many pull-throughs are more like ripping and scraping steel off the sides and thus you usually end up with a sharp but pretty rough and non-uniform edge. Plus pull-throughs usually don't have different "grits" for getting a good fine edge. Pull-throughs really aren't bad for using on like a beater yard work knife or something but are going to give a really rough, toothy, and ragged edge for any kind of finer work.
@KnifewearKnives
11 ай бұрын
Couldn't have said it better myself!
@888SpinR
10 ай бұрын
@@knownaigm Got it! Thanks for taking the time to explain that!
@krisrhebergen
5 ай бұрын
I’m trying to figure out for the life of me why she thought you were supposed to use the steel on the same side right after using the diamond side. No way you’re going to remove the burr that way
@lsamoa
5 ай бұрын
At what angle does that little Tojiro clip-on angly thingy keep the knife?
@KnifewearKnives
5 ай бұрын
About 15 degrees! It varies slightly depending on the height of the knife.
@lsamoa
5 ай бұрын
@@KnifewearKnives Thank you! :)
@nickolastiguan
10 ай бұрын
17:16 just randomly decided to flex 🥵
@stevenlewis1387
7 ай бұрын
I want a Japanese knife and was sold crap befor, how do I order from your shop?
@KnifewearKnives
7 ай бұрын
Head to knifewear.com! Feel free to shoot us a message or email if you need help or want more info on who made your knife.
@PrzemekBech
7 ай бұрын
Few things not clear form the video. For one you counter only sharpening time but not soaking time. 20 min more in that case. The. Watering during sharpening, dirt… I think that if I was not into knives I wouldn’t be convinced to start using whetstone. Why not advertise also diamond stones? They are much easier to use at same or better effectiveness. No need to flatten the stone, no need to soak in water.
@inFamous06
2 ай бұрын
GODDAMN NAOTO, 45 SECONDS!?
@Soneoak
4 ай бұрын
Got a feeling their video/instruction is wrong
@franciscodemedeiros5862
6 ай бұрын
Where you guys from
@KnifewearKnives
6 ай бұрын
We're from Canada!
@trevorsmales9303
9 ай бұрын
LOL at how biased you are in this video.
@iamcyberpunk68
Ай бұрын
magnets do not stiick to stainless
@KnifewearKnives
Ай бұрын
This is high carbon stainless steel, so in this case magnets will stick.
@karolinedahl3458
16 күн бұрын
The Chinese 🇨🇳 way of sharpening isn’t the best way. 😏😒😜right back
@fightinirish73kk
8 ай бұрын
tumbler is cheap knock off of the horl 2 been a chef for 35 yrs and use wet stones shapton glass but 45 seconds is amazing .
@KnifewearKnives
8 ай бұрын
We've got to try the Horl one of these days!
@fightinirish73kk
8 ай бұрын
@@KnifewearKnives it is a much better version plus discs are removable
@darieng619
7 ай бұрын
I found the Tumblr to be complete garbage. At least the return process was easy.
@robertcornelius3514
2 ай бұрын
Tumbler looks extremely dangerous for stupid people to use.
@kreech68
10 ай бұрын
Beginners are not going to be thinning their knives.... It isn't really a comparison point. I know that you're trying to sell wetstones, but...
@KnifewearKnives
10 ай бұрын
Great point! Because thinning is such an essential part of sharpening a Japanese knife, we always take it into consideration. If folks can learn to sharpen their own knives, thinning is relatively straightforward so we try to encourage it!
@einundsiebenziger5488
9 ай бұрын
... whetstones* (from "to whet" = to sharpen)
@einundsiebenziger5488
9 ай бұрын
@@KnifewearKnives With all due respect, thinning is nonsense. You want a thin-blade knife, buy a thin-blade knife. You have a thick-blade knife and want it to be sharper, sharpen it to a more acute angle. Not need for an effort that can't be corrected once it's gone wrong.
@josecbm89
4 ай бұрын
My first sharpening was thinning my knives, due to years of bad maintenance.
@josecbm89
4 ай бұрын
@@einundsiebenziger5488geometry is more important than sharpening for cutting food. You can fine cut tomatoes with an squared apex if the knife is thin enough
@cryptomnesiac
11 ай бұрын
Tumbler seems like a gimmick to me. Nothing wrong with the old school way.
@tjerkheringa937
11 ай бұрын
I completely understand that you guys like to promote your stone sharpening service. But i am disappointed by the way you conducted this 'test'. I have been using a roller for many years with great results.
@KnifewearKnives
11 ай бұрын
Hey, I appreciate the feedback! If you have suggestions on improving it, please let us know! Are you using the Tumbler or the Horl?
@hadis93
11 ай бұрын
The problem really is that the official instructions for the tumbler suck. I suspect it would do a whole lot better with a proper method like adjusting pressure, flipping sides in more conventional intervals and actually removing the bur on the correct side. At that point the tumbler is kind of useless though since the whole point of it is to be easy and require no knowledge.
@tjerkheringa937
11 ай бұрын
I use neither the Horl or the Tumbler. I have an earlier German product from the people who actually invented this system. Sure, for the most demanding applications, i can use my wet stones. Like for repair jobs. Not being a sharpness fetishist, but a regular hobby chef, i have no need for knifes that are so insanely sharp that the meats cuts itself out of fear for the knife. I cut food, not newspapers. I slice tomatoes. I don't give them a clean shaving job. I need something quick and easy without setting up an entire sharpening station and soaking stones for 10 minutes before i can even start sharpening. Not to mention the cleaning up time. Using the roller as a regular way of maintaining the sharpness of my knifes is absolutely perfectly adequate for me. My knifes slide through the food effortlessly. The roller gives me an excellent sharpness on my German and Japanese knifes, that is perfect overkill for all normal kitchen work in a few easy minutes. If i really want that little bit of extra sharpness i use the strop after the roller.
@888SpinR
11 ай бұрын
@@tjerkheringa937 I hear ya on the whole sharpening station thing. I personally use Shapton, splash a tiny bit of water and you're good to go and the storage box doubles as a stand. I'm curious, what is the original product called and where can I find one? None of the hip branding BS.
@Master...deBater
11 ай бұрын
What disappointed you about the way they performed the test? What more should they have done other than perform the test according to the printed directions? The fact is...these products are very limited in their ability to sharpen knives of varying bevel angles, blade heights, and knife conditions. I think they gave the product the best opportunity they could...by using new knives in good condition with straight undamaged blades. I have several old Sabatier knives with uneven grinds and even a slight propeller twist that this product would fail miserably with. With 20+ years of sharpening stone experience...I can easily deal with all these knife issues in just a few minutes. In my opinion, investing in ones own sharpening skills is a much better solution than chasing gimmicky products in order to avoid putting in the time to learn a valuable lifelong skill!
Пікірлер: 132