It’s good to see personal projects getting attention too. That’s gonna be real nice when finished
@jeffhesse8415
18 күн бұрын
"Run be gone"! 😂 I gotta see if my local paint shop has some of that because every can of paint I get has runs in it.😅 She's looking good Tony!
@minnesotatomcat
18 күн бұрын
That might not be the right way…….but it’s so much faster than the right way and as long as you’re not selling it and just getting it back out to have fun then it was 100% the right choice 👍
@yachtsteve
18 күн бұрын
I love that old expression, perfection is the enemy of good. I have a friend that just gets so carried away with that last detail and I have to tell him Joe this is a flipper we have to put our tools away and put the for sale sign on it we can't just keep detailing it.
@johnperreault2280
18 күн бұрын
Great job Tony. More often than not to comment I often hear from young people wanting to get into the hobby is that it is way too expensive for them to be able to afford, it can be if you fall into the good better best trap. This is an excellent example of how to get into the old auto hobby without going broke. Not every hot rod needs A $10,000 paint job. You will have more fun with an old beater than you ever will with a show car. I am speaking from many many years of experience. My four-door beater 57 Chevy has been the most fun I’ve ever had with a old car. My show cars, not so much ....
@EDJ-l4v
7 күн бұрын
Doin the same basically to my 94 GMC............Rock On😎
@wtaylorg
16 күн бұрын
I really like how you show us the mistakes, drips, etc and let us see that that kind of stuff happens to everyone This is a neat old car.
@youthdawg
18 күн бұрын
You're HILARIOUS!!! Your imitation of a drunk goober was awesome!!!
@randiegadberry5448
17 күн бұрын
Reminds me of my 51 hardtop I had in high school in 62-63.
@frankfurther3828
18 күн бұрын
Loved the poultice method, and I hope I never need it!
@andrewelliott4890
18 күн бұрын
Loves it! Also love the Newfoundland Band-Aid on your thumb. Lol.
@jrmrencso8716
18 күн бұрын
She's ready for the show circuit!
@anthonybautovic7202
18 күн бұрын
We use that paint in Australia for structural steel , very good strong paint
@kenstevens5675
16 күн бұрын
Seems like every paint can I buy has runs included. Thanks for sharing.
@minnesotatomcat
18 күн бұрын
Your brother had too many paint fumes I think! 🤣 that made me cackle
@ronnysplymouth68
18 күн бұрын
GREAT series Tony Thank you
@russdavis1960
18 күн бұрын
Ever since you made mention of that primer (and i was finally able to locate a supplier) I've been using it for various projects. I was only able to get it in light gray or white...but that's fine. It works very well and the price (at least the last time I got any) was very reasonable. I don't recall if you have a paint shaker or not... but I was informed by a long time body shop owner he shakes his filler before using to make it smoother. I tried it to see if it would make any difference. I must say i was impressed and have been using that 'trick' ever since. No pinholes.... just nice smooth consistency.
@rjung_ch
18 күн бұрын
Thanks Tony, this is a nice little quick series on the Flip Side! Take care 👍💪✌
@gordonstarship
18 күн бұрын
Looks great. I can't wait for the TremClad top coat
@leonardgilbreath9004
16 күн бұрын
Watching you do the body work and priming it the wheel covers are top notch good luck on your steering fix thumbs up 👍👍👍👍👍
@laurensmith1828
16 күн бұрын
I like it , thanks for giving the skinny on the,"Taxi" paint job . Took years and years to work out this strategy . Thanks again Tony!
@victorthecarguy3126
11 күн бұрын
Would look nice in the blue primer. I'm sure your done with the satin black by now. It's nice to see the shortcuts. Thanks.
@deanm4138
18 күн бұрын
She’s coming along nicely
@bradwolfgang1037
18 күн бұрын
I love the “Masking Tape” bandage on your thumb. LOL on that since I have done that myself. ( small pice of shop paper towel & masking tape ) stops the bleeding 👍😄👌😎😎
@chrishouse5753
17 күн бұрын
Fitzee, you are a magician. I wish I could live near by and offer my help for free so I could learn just a little of what you can do.
@michaelvandenhoy1021
17 күн бұрын
Looks like a princess auto spray gun that you are using. Great idea using the garbage bags to cover the wheels, I was using tire covers, but garbage bags much cheaper. You have had that car for awhile now, still looking great, nice to see the body work that you use to do in the past. Other than the minor run, body work looks great. Thanks for sharing.
@BrucePierson
17 күн бұрын
That's a good idea with the tire covers made from garbage bags. I must remember that.
@erichuff2538
18 күн бұрын
Nice. I like blue.
@Shelbycarguy
15 күн бұрын
I’m a fan. You have more than proven you skills however I love seeing real world work for beaters, daily drivers or second toy where other toys get the money. Making it “better” is what many can strive for. I like the diversity of you vids. I would love to see you do the Tremclad spray. Paint costs are stupid and single stage DTM can be a “ better” job for many. I would love to see your approach.
@shotsrodder
18 күн бұрын
She’s looking pretty darn nice Tony 😎
@dennisschickling2249
17 күн бұрын
Nice Work. #STAYSAFE #PHILLYPHILLY 🇺🇸
@paulblack2402
16 күн бұрын
Nice work Fitzee, look foreward to the next instalment .!!
@davegallucci9327
18 күн бұрын
Good job, a nice driver!😊
@kerryyeroyan8212
18 күн бұрын
Looks great, getting it done..
@ronaldfarmer1208
10 күн бұрын
Good one
@lancemclean9273
14 күн бұрын
She’ll be beautiful
@eddiereeher7594
11 күн бұрын
good show😎👍
@brunohoutwipper4225
18 күн бұрын
Great show to watch
@waynelaferriere6268
18 күн бұрын
She's Mint !
@larrylilly2552
16 күн бұрын
Nice enough
@robbigemon1868
17 күн бұрын
You got it now tony shes mint
@johnds6621
18 күн бұрын
I always say no job is complete without a boo boo or two.
@jamescrooks2308
18 күн бұрын
Should just leave it in that blue and see how long that primer lasts plus I like that blue
@alunhuang-wright3030
17 күн бұрын
I think this has been a superb mini series, but how do complete amateurs like me know what it is safe to fill and what needs to be done with metal?
@fitzeesfabrication.thefl-nf7hp
16 күн бұрын
Ask yourself. Will this rusty section cause any failure in the drive ability of the car? No? Muck it up. Yes? Weld it up..
@lenscap8925
18 күн бұрын
"Run-be-Gone?" Isle 4...
@jeff3175
18 күн бұрын
Love the content Fitzee. Question, is tremclad able to have a clear coat sprayed over the top?
@fitzeesfabrication.thefl-nf7hp
18 күн бұрын
Yes.
@garyruark9506
18 күн бұрын
You need a fleetline sedan to go with it. They are cool looking fastback design.
@fitzeesfabrication.thefl-nf7hp
18 күн бұрын
Have one! The chopped on up on ceiling
@juniorwhelchel6337
18 күн бұрын
I love your twin brother😂😅😊😢
@user-rb2mf3hj3e
13 күн бұрын
She looks good in blue Fitzy bah! Change it up?
@kevinmartin5489
18 күн бұрын
Job & a half.
@garyruark9506
18 күн бұрын
Looks good. Do you go underneath or behind filler and seal it?
@fitzeesfabrication.thefl-nf7hp
16 күн бұрын
Yes I will seam sealer it
@rickkarenb8113
18 күн бұрын
Hey Tony, I'll trade you a case automotive "Run Be Gone" for a marine case of "Rock Off"! I'll need it for my 52 Styleline Deluxe. Thanks for all the informative videos.
@fitzeesfabrication.thefl-nf7hp
18 күн бұрын
Hahaha
@goptools
18 күн бұрын
Hi Tony. Nice progress on the 51. I think it would have taken me a couple weeks to get that far. The way the black sanded down, you could tell it was pretty tough stuff. I wonder if you can buy that paint in the States.
@fitzeesfabrication.thefl-nf7hp
18 күн бұрын
Rustoleum is much the same
@goptools
18 күн бұрын
@@fitzeesfabrication.thefl-nf7hp Thank you!
@Joe.Doucette
18 күн бұрын
Factory metal quarter panel. ;)
@tonyshepherd39
17 күн бұрын
👍😁
@mrgreezy1
18 күн бұрын
Looks like the fan adjustment on the gun isn’t wide enough. Just a thought. 💯
@fitzeesfabrication.thefl-nf7hp
18 күн бұрын
I know. Just trying to keep the coverage small
@mrgreezy1
18 күн бұрын
@@fitzeesfabrication.thefl-nf7hp then turn down the flow and you should have less runs ! Love the car !!! 💯
@denisedeon3336
18 күн бұрын
what ever keeps her on the road for the next fella. too many good runners get taken apart and never get put back together because they are too far gone
@errolpoxleitner7901
18 күн бұрын
Good job cleaning up that mess.
@kimballmcafee3589
7 күн бұрын
Fitzee, what's holding you up from getting your lift working??
@ericjohnson9080
18 күн бұрын
What are the mechanicals in this car. It has a nice stance.
@steveroberts4762
17 күн бұрын
How's your garden? I see you have a green thumb 👍
@fitzeesfabrication.thefl-nf7hp
16 күн бұрын
Garden?? Lots of grass!! Lol
@shotsrodder
18 күн бұрын
There’s always one more spot 😂😂
@domecrack
18 күн бұрын
10:19 Fitzee's mix: 4:1:0.5 interseal to activator to "thinner" (Acetone? Xylene?)
@domecrack
18 күн бұрын
15:10 (Ether?)
@fitzeesfabrication.thefl-nf7hp
18 күн бұрын
Good automotive thinners.
@monadking2761
17 күн бұрын
I love the comment about run begone. Does that come in a tube or jar that I can add to my paint when I shoot my car?
@fitzeesfabrication.thefl-nf7hp
16 күн бұрын
Hahaha
@gregneymeyer5220
18 күн бұрын
I see non-stock cooling components in the grill. What's the running gear?
@fitzeesfabrication.thefl-nf7hp
18 күн бұрын
267 V8 T350 transmission with a 10 bolt chevy out back. Front suspension is mustang II
@alfaradbean
18 күн бұрын
We must have much drive time before we die
@punkinsgarageandpaint8299
18 күн бұрын
I hope after this one you do the custom that you started years ago.
@fitzeesfabrication.thefl-nf7hp
18 күн бұрын
That's wall art right now. I stopped buy projects and just want to get what I have done. That one most likely will be the last one in a list of 4! Lol
@clausschuster470
16 күн бұрын
leave it blue for a year
@yachtsteve
18 күн бұрын
Yeah Tony I need to get some of that anti run. Where do you pick that up 🤣 You Canadians have access to all that good stuff that we can't get here in America😂
@rondrew2857
18 күн бұрын
I am confused, you and Bondo Billy have very different spray patterns?
@fitzeesfabrication.thefl-nf7hp
18 күн бұрын
He get runs too?? Lol
@BrucePierson
17 күн бұрын
That's the worst part of the bodywork done, now you're almost ready for paint and it will be finished.
@user-zp9yx9kq8k
18 күн бұрын
Did you have a retirement party for Devilbiss JGA paint gun? LOL
@fitzeesfabrication.thefl-nf7hp
18 күн бұрын
Lol. That's still around. Going use it on this one when I paint
@jayinmi3706
18 күн бұрын
You didn't explain where the name Poltus cameee from. I'd love to know.
@rgc1961
18 күн бұрын
From the online Oxford dictionary: "A soft, moist mass of material, typically of plant material or flour, applied to the body to relieve soreness and inflammation and kept in place with a cloth."
@rgc1961
18 күн бұрын
Poultice.
@juniorwhelchel6337
18 күн бұрын
Can any color paint be us d as a primer without adding promer to the paint
@fitzeesfabrication.thefl-nf7hp
18 күн бұрын
This is a primer. Not a paint
@jakespeed63
18 күн бұрын
Nice work Tony. With all your talent and resources it’s time to ditch the flat black.
@fitzeesfabrication.thefl-nf7hp
16 күн бұрын
It was satin and sorry.I like the look.
@sarblade
18 күн бұрын
I think if you'd have fanned the pattern out more, and had a bit more air pressure, you'd not had the runs lol. And no orange peel.
@fitzeesfabrication.thefl-nf7hp
18 күн бұрын
Ya I was trying to keep the primer from going over everything. Reason I had it turned in
She looks terrible with the blue and black paint 😂😂 She’s looking good I think you’re going about it the right way instead of having it apart for God knows how long 👍
@tsirron
18 күн бұрын
Wow blue?
@boatnut64
18 күн бұрын
Same primer he used on the Mustang...
@tsirron
18 күн бұрын
@@boatnut64 yes it is the same one I wanted to see His response But what ever
Пікірлер: 105