The sound of the parts engaging with each other is really satisfying!
@doganozmen9528
2 жыл бұрын
Master of sheet metal click construction.
@Jono.
2 ай бұрын
I design plastic injection molded parts and stamped metal automotive parts for my work. These designs are great, nice work! Super impressive. I think this video might give me a few ideas for snap clips assembly interfaces as well. Thanks for making the video!
@NewtonInnovations
2 ай бұрын
Thank you for the compliment. You can download step files of all my 2-D laser cut models from my webshop (look for the compilation - single 10Mb file containing all models). There are some details in these connections that are not necessarily visible to the eye, much less on a video, that make for a connection with a minimum of (or no) play. I hope you also so the compilation video of my 3-D laser cut models. I never had the occasion to modify these for stamped parts, but that can be done, of course. The 3-D forming capabilities of the stamping process literally add another dimension that can be utilised in creative ways. Another "family" of solutions is waiting to be invented! I'd appreciate being notified if you come up with something new. I wish you all the best!
@cgz47
2 жыл бұрын
A very good example of Think Simple mentality
@Gregsusername
3 жыл бұрын
There are so many videos on this site about satisfying things. This beats them all out
@Auday365
3 жыл бұрын
great work, thanks foe sharing
@NewtonInnovations
3 жыл бұрын
Thanks so much for the compliment! It means a lot to me to get feedback.
@mahagolestaneh
Жыл бұрын
You are amazing!
@1StepaTHC
2 жыл бұрын
I'm at work now, an watched all of your videos. Got some ideas :D What kind of steel do u use? I see that is cold rolled steel, any specific quality?
@NewtonInnovations
2 жыл бұрын
Most of these designs went into productions as 304 stainless steel parts. The hand-sized models are most likely also 304 - I didn't think to ask the producing partner - just specified stainless steel. 316 would be overkill, however. Of course the designs can be reproduced in a variety of materials/metals.
@ayukebot4272
Жыл бұрын
So satisfying to watch. Can you be contacted for some tips?
@NewtonInnovations
Жыл бұрын
Yes, initially please use the contact form on my website newton-innovations.com, we’ll see from there.
@amrnagah3398
4 жыл бұрын
Good job 👍👌
@p.-ski9889
Жыл бұрын
I love it
@chien-chihyu2877
Жыл бұрын
These designs are amazing I am wondering what's the thickness of sheet metal should I use to make it deform properly? Such as 0:10, what's the thickness of the bottom piece of sheet metal?
@NewtonInnovations
Жыл бұрын
Thank you for the compliment. For solution #2, the bottom plate is 1.5mm, top plate 2.5mm. You can use other thicknesses, as long as you dimension the parts accordingly.
@NewtonInnovations
Жыл бұрын
"Properly" is also in the eye of the beholder. I have dimensioned these solutions to be hand held and operated, and utilise only elastic deformation to allow reusability.. If you want to allow plastic deformation, you have other options.
@jasirfaizan4202
Жыл бұрын
How much will be load bearing capacity of these snap-fit locks, especially for solution #3?
@NewtonInnovations
Жыл бұрын
They've never been tested for load-bearing capacity. If the hooks are the limiting factor, adding more of them (if you have the space) will increase the capacity. You could try FEM analysis.
@chien-chihyu2877
Жыл бұрын
Hi, I have ordered "Elastic Latch in Mate" 3d cad file from your website, but I am not able to download the .zip file, it says "File not found"
@kamalkhan-ef6ct
Ай бұрын
Amazing, Can i have the step files for these
@NewtonInnovations
Ай бұрын
You can download them from my webshop (newton-innovations.com/shop/) Look for "All 2-D Laser Models" at the bottom of the page - everything is in there. Please let me know if you have any issues with the website certificate or downloading.
@zlyx2685
7 ай бұрын
Do you have some specific sheet metal k factor for flat patterns or do you use regular 0.44 on all material and thicknesses , cause i ll be struggling with some flat patterns accuracy on some bends
@NewtonInnovations
7 ай бұрын
The k factor was left up to the producer - I had no influence on it. They were sent a step file of the 3-D model, were not even given a flat state contour. When designing these types of solutions for my previous employer, I did send in a flat state contour to our suppliers, but had no influence on the k-values. I'm sorry I cannot help on that.
@zlyx2685
7 ай бұрын
@@NewtonInnovations yess sir understand thanks!
@hasinaranisahu4616
2 жыл бұрын
Very simple design.. ideas👍 Can U share some fish plate joint design ?
@NewtonInnovations
2 жыл бұрын
Please tell me what you mean by fish plate joint. I looked it up and they are used for joining train tracks together.
@hasinaranisahu4616
2 жыл бұрын
@@NewtonInnovations Yes.. same kind of.. I m looking for guide rail joints for elevator industry..
@NewtonInnovations
2 жыл бұрын
@@hasinaranisahu4616 I've never worked with fish plate joints. What sort of problems are you experiencing? What are the drawbacks of the current designs?
@hasinaranisahu4616
2 жыл бұрын
@@NewtonInnovationsKeep uploading these kind of videos.. The ideas are really helpful. I m trying to simplify the existing locking arrangement of sheet metal fish plate..
@NewtonInnovations
2 жыл бұрын
@@hasinaranisahu4616 Thank you for the encouragement! I wish you success with your design. It is not always (/ever?) easy to make things simple.
@frangobsb32
2 жыл бұрын
This is amazing. Is there a way to get in touch? I’d like to talk about hiring your design services.
@NewtonInnovations
2 жыл бұрын
Yes! Use the Contact link on my website, newton-innovations.com
@楊宗霖-g1e
Жыл бұрын
~讚👍!👏👏👏😊
@sunilkumarpatil2272
3 жыл бұрын
I am really interested in learning this technique
@NewtonInnovations
2 жыл бұрын
Thank you for your interest! Contact me using the contact link on my website: newton-innovations.com I don't have any written materials, but we could set up a chat to give you any details you want. kind regards, Gerrit
@C4Fuu
10 ай бұрын
Is it okay to ask the blueprint for the number 6? 1:19
@NewtonInnovations
10 ай бұрын
I just put it on "sale" (free step file download) in my webshop (see newton-innovations.com). I don't have any 2-D drawings.
Пікірлер: 40