Just wanted to say thanks for your videos. They are very detailed and educational for new users as me. I just placed an order for an i4, 1PM and dimmer to test it towards switches and dimmerable lights, PIR sensors etc. We are building a new house next year and my intention is to install 24VDC FUGA push buttons in the rooms and wire them to my switchboard where I then install all inputs and outputs making it easy to access and trouble shoot while I concentrate all wireless interactions in that switch board room. Will be viewing your videos again and again when I go into test mode :-)
@csongorvarga
11 ай бұрын
Thanks a lot. Wiring your switches and lights as separate circuits will add a lot of customizability in the future. And you can use cheap thin wires for the switches. I ahve the same at home, older UTP wire is used for switches, easy to chain up to 7 switches to 1 UTP cable. Copenhangen rulz!
@Zbyszekakaduk
Жыл бұрын
For me the best shelly i4 tutorial. It explains a lot. Regards.
@Isira-Uthpala
2 жыл бұрын
Can this use to turn on and off 4 Devices ? (Without Switch - Using APP)
@rdy4trvl
2 жыл бұрын
Simply amazing the products Shelly is putting out. Nice product review. Here's a big picture question: I've got a big remodeling project (small house but remodeling all of it) and I need assistance in planning full utilization of Shelly's capabilities. I don't need an electrician (yet) but someone to plan, like a Shelly system architect. Any ideas?
@csongorvarga
2 жыл бұрын
Sounds interesting. Maybe a facebook group? That will probably have loads of experinced folks and also some guys from Shelly as well.
@rdy4trvl
2 жыл бұрын
@@csongorvarga Great idea...that's where I'm headed. FYI you introduced me to Shelly Motion. I found them difficult to set up but once operating (almost 1 year, no recharging yet) they're flawless. Thanks!!
@yosefscicluna1588
4 ай бұрын
Thanks for your interesting video. I would like to know if I can control a device that is in Tuya Smart network. There is a way to send a action URL command to turn ON/OFF the Tuya lights?
@csongorvarga
4 ай бұрын
No, as far as I know, Tuya is completely closed system.
@skutaf
9 ай бұрын
How do I get that url /light/... where is the "light" coming from? is it channel name?
@134mossy
Жыл бұрын
Great tutorial and works perfectly with my shelly dimmers. I have tried to use the same command with my shelly relays with no success. I replaced light with relay in the command to toggle the relay but it won't work. Have you tried it with the shelly relay and if so how did you do it.
@134mossy
Жыл бұрын
Think I've found the answer which works. 192.***.*.**/relay/0?turn=toggle (or turn=off or on)
@seanparsons2821
Жыл бұрын
How do you get the commands for the webhooks?
@getadolf254
Жыл бұрын
I also desperately need to know how that works? Is there ready made commandos or does everyone have to make up them themselves?
@robboelectronicaus
11 ай бұрын
Great Video is the same configuration for the Shelley i3 ?
@csongorvarga
11 ай бұрын
Yes, it appears to be the same logic and wiring.
@FerEriol
Жыл бұрын
how do you remove the shield in case you need to access the back part of the switch? i bought some for making tests and my experience is that the shield cannot be removed without damaging the wall. Have you any experience with this?
@csongorvarga
Жыл бұрын
Sorry, did not try that. Maybe putting masking tape on the wall?
@FaLLeNaNg3L82
2 жыл бұрын
Is it also possible to control hard wired, non smart Light sources? For example: connecting a hard wired Light source to the switch witch is wired to 2 other light sources. And crobtrolling them with for example button1, let's say you also have a smart bulb on a night stand, each on one side of the bed and maybe a standing lamp in the corner connected to a switch with a shelly 1. Now is it possible to control each of These Devices with one Button each and have the Button 4 Set so it Turns all those lights on or off
@unknownentity330
Жыл бұрын
You would need 3 x Shelly 1/1PM/1L OR 1 x Shelly 2.5 + 1 x Shelly 1/1PM/1L in order to be able to have individual control over each light. Then you would create rules in the Shelly app so that on the Shelly I4 with Shelly Wall Switch 4 BUTTON 1 = LIGHT 1 TOGGLE ON/OFF BUTTON 2 = LIGHT 2 TOGGLE ON/OFF BUTTON 3 = LIGHT 3 TOGGLE ON/OFF BUTTON 4 = ALL LIGHTS TOGGLE ON/OFF Just for clarification: The I4 DOES NOT connect to any appliance. It does not have any relays in it. It is a standalone device that tells other Shelly devices (with relays in them) which are connected to appliances what to do.
@JustBadMeAndI
Жыл бұрын
What about dimming when holding the button?
@csongorvarga
Жыл бұрын
I could not do it. I mean you can send an actual brightness value to a bulb, but there is no "reduce brightness by 10%" or similar. So this is why I could not do a continuous dimming.
@InToXz
2 жыл бұрын
if i want to make scenes what do you think using wifi or zigbee is better ?
@csongorvarga
2 жыл бұрын
Shelly has no zigbee devices. What do you mean?
@simonsayshomeassistant
2 жыл бұрын
I use Zigbee Xiaomi PIR sensors with Shelly to control the lights
@CiprianNitu
2 жыл бұрын
What light bulb are you using?
@csongorvarga
2 жыл бұрын
It is a Shelly Duo.
@klim4598
3 ай бұрын
danger! you can't connect live 220-110 AC(red wire) to Shelly Wall Switch. Max is 12 VDC / 18 VAC.
@csongorvarga
3 ай бұрын
No, regular i4 works with mains. There is a i4 DC which only handles DC.
@klim4598
3 ай бұрын
@@csongorvarga that is correct. that's why you can't connect regular i4 and Shelly Wall Switch. Shelly Wall Switch is not for 220v.(red wire)
@larahau
Жыл бұрын
I spent 22 min. but didn't manage to understand: how this Shelly I4 really works? - does this communicate with another Shelly relay which do the physical switch ? You should have show us all the wiring - from mains to shelly, to switch and to bulb. Not explanatory enough!
@MrRoma70
Жыл бұрын
Tried to setup my two Shelly I4 Plus to control some Shely 1 and is not working, when input the URL into the browser it works great, but whenadd to WebHook and push the button nothing happen, can you please help me? Your time is really appreciated Update: I found another way to make it work as everyhing I tried didn't, so I am using HA in Automation to trigger the Device to do the action when the button is pressed YAML alias: gate_control_i4 description: "" trigger: - platform: device device_id: 2xxxxxxxxxxxxxa82b464xxx domain: shelly type: single_push subtype: button4 condition: [] action: - type: toggle device_id: 373xxxxxxxxxxx3f3e48xxx entity_id: switch.cancello domain: switch mode: single
Пікірлер: 32