This is the best video on this problem. This happened to me, this is how i fixed mine instead of vice grips. Put the nut back on with 2 washers tighten. Then hold back on the neck with pliers and then with a socket/ ratchet continue to tighten till it turns. It will get free. Continue to add penetrating oil from both sides and continue to work till all the rust comes out. Great video, love the detailed I wish I could've found this video before I spent 6hrs f-ing with mine.
@hyundaitech
Жыл бұрын
Hahhaa thanks for the tip. Maybe next time when i have like this in the shop i will try your method.
@tiggarhill7269
Жыл бұрын
Thank you so much was able to repair my Hyundai ,You saved me hundreds of dollars!!!
@cherilynblake8384
11 ай бұрын
thank you so much! needed to know if this was something i could complete myself and i already have the centre console apart!
@joshiedraws3391
7 ай бұрын
Thanks to this video. It’s super helpful. It happened to me at 11pm, good thing I found this on youtube and we were able to fix it. Lifesaver! 🙏🏼
@hyundaitech
7 ай бұрын
Glad it helped!
@otrebornadu6741
Жыл бұрын
Wow! Agressive!.. I had exact issue, same steps but just cleaned and wd 40 on cable and all included. Loosened and retighted all for good flow of wd40. Reasymboled,.2/ 3hr days Done. No cost!...was quoted $ 650.00..
@charlieterrell8501
10 күн бұрын
Sorry for the late reply. But what car did you do this too? I have a 2012 Genesis sedan
@IPro_IKyle
Жыл бұрын
09 3.3L v6 Sonata 200000 miles Very similar for shifter cable replacement. Save yourself the time and get yourself a ratcheting 12mm closed end wrench with a flex / pivoting end. Also you'll have to take off the footwell side panels for both driver and passenger to access those bolts. The cable will pull out through the interior, i cut my cable in half to make it easier to pull through the hole.
@blixasice
Жыл бұрын
Just had this done on my accent. They charged me an arm and a leg on the labor. Took them 2hrs
@mohamedmhal4082
Жыл бұрын
Nice explanation
@ilianatorres9387
5 ай бұрын
How much does this job cost
@hyundaitech
5 ай бұрын
Around 3 hrs for replacement.
@NickC182
6 ай бұрын
I have a 07 Elantra and the shifter cable snapped. I can’t get the cable out of that metal clip. Is there a method to remove it?
@hyundaitech
6 ай бұрын
The clip on the transmission side or tge shifter assy side, shifter assy side you just have to spread the c shape and pull, on the transmission side theres a small tab on each side where the cable sits, you have to push at the same time and pull the cable up, and spray some penetrating fluid maybe its stuck on some rust. Hope that helps.
@golfcon
2 жыл бұрын
HT, my shaft lever from transmission is NOT moving by hand like yours but its moving when I pry it with a large screwdriver …..how do I free up the arm or trans shaft lever?
@hyundaitech
2 жыл бұрын
Try soaking it with penetrating fluid let it sit then play around with. Worst case scenario is you have to heat it up, but since you can move it with screwdriver the penetrating fluid will free it up. Let me know
@samwelimtambala9390
10 ай бұрын
Good mecanisien
@meganlacey6154
7 ай бұрын
Can the shift linkage cable (or shifter cable) cause gear timing or selection issues such as the speed measured by input shaft speed sensor to be different from the speed of the engine, and therefore TCM/PCM to report "Input Shaft Speed Sensor No Signal" error?
@hyundaitech
7 ай бұрын
No, the shift cable just for selection for park to drive, if you have issue with the speed sensor couls be you have sensor issue, wire issue.
@blackronin848
3 ай бұрын
Hey man just found your channel my 2015 5.0 genesis is stuck in neutral what could the cable doing in that situation
@hyundaitech
3 ай бұрын
Check the lever in the inhibitor switch, the sid eof the transmission. The joint coukd be seized there.
@Boranavin360
2 жыл бұрын
How much does it cost to replace the cable?
@hyundaitech
2 жыл бұрын
If im not mistaken the book time call for 2.5 to 3 hours. Hope that helps
@SchrodingerzCar
Жыл бұрын
What's that clip on the inside of the car for the shifter cable? My car got stuck in neutral and I noticed nothing was there.
@hyundaitech
Жыл бұрын
The clip is just to keep the cable in place so that it wont come off.
@SchrodingerzCar
Жыл бұрын
@@hyundaitech I know. Mine came off. What's the replacement for an Elantra?
@hyundaitech
Жыл бұрын
@@SchrodingerzCar so it just came off? But if you put it back the shifter works fine? If yes maybe temporarily you can use a paper clip just lock it in place unless the cable itself is damage and in that case you need a new one.
@leonoragardipee7113
Жыл бұрын
OK what is the battery keeps dying and the shifter is Impark and it won’t come out of her to put it in drive
@hyundaitech
Жыл бұрын
You mean what if the battery keeps dying and the shifter wont come out to park? Either you have two separate issue or they are related. Maybe you have a parasitic draw meaning you have unwanted current turning on when the vehicle is off or you have a fault in charging system and not charging the battery. For the shifter issue, it could be anything, you could have a fault in your brake switch, shifter solenoid or shifter cable. I would suggest to go to reputable mechanic and have it diagnose correctly. Thanks
@ds2985
Жыл бұрын
Hi mate I have a 06 automatic santa fe and it wont go into gear just reverse. Would that be the cable ?
@hyundaitech
Жыл бұрын
Could be cable or the end of the cable that is connected to the inhibitor switch couls be seized. Checked those.
@carlosfernandez-te3jt
Жыл бұрын
Yo tengo una tucson 2005 y pongo D y no avanza
@Vic-cr5eq
9 ай бұрын
What if an Elantra won't shift into drive at times like a 2016? Shifter cable too?
@hyundaitech
9 ай бұрын
Shifter wont go to drive? Check the end of the cable in the transmission if that joint is moving freely, if not you can lubricate it for the meantime to loosen it up, if its really stuck yeah you need new shifter cable.
@Vic-cr5eq
9 ай бұрын
@@hyundaitechIt's intermittent. I start the car and I move the shifter into Drive but won't engage like it's in neutral. I move back to reverse or neutral then back into Drive and it engages. Weird. I see alot of people commenting on the same issue in hyundai forums etc
@tchekesarecords
Жыл бұрын
I have a Hyundai Tucson 2006 2.7 , Its wont shift to Sport Mode 🤦🏽♂️ can somebody help me
@hyundaitech
Жыл бұрын
Have you scan it for codes?
@tchekesarecords
Жыл бұрын
@@hyundaitech my car was victim by a cyclone, water was all over
@tchekesarecords
Жыл бұрын
@@hyundaitech i think i have Neutral Safety Switch sensor problem
@teigananderson3512
2 жыл бұрын
Hello i have the same car and it was stuck in P but was forced into drive worked for awhile but now it wont go in drive but it will reverse but it does stick in park and stick when going from drive to reverse. Do you think its the same issue as this? also no drive light. only PRN lights up but not drive. Please get back to me I really need help. Thank you.
@hyundaitech
2 жыл бұрын
It depends, one way is to remove the cable from transmission or the inhibitor switch, the try moving the shifter if it moves freely if yes then you gonna check the end of the cable if it turns freely, if not you need a new cable, if it turns freely you have to move the input lever in the transmission if it moves freely. Hope that helps.
@golfcon
2 жыл бұрын
@@hyundaitech great video angle to see the lever or transmission shaft moving freely by hand ….I thought the shifter cable works by pulling and pushing the trans lever
Пікірлер: 44